履历各屏画面说明书_简历_求职职场_实用文档.doc

顧客名株式会社殿納入場所 貴武漢泰極江森座椅有限公司 殿御向装置名2PW車 履歴2013年01月第3.0版桜井電材株式会社富士電機株式会社 富士電機機器制御株式会社 富士株式会社上海撼域自动化科技有限公司NA503234-03This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.DWG.NO. 履歴記号年月日改定者改定改定理由版2008/06/20村瀬初版版2008/11/25村瀬現地試験結果3.0版2013/01/10朱瀚文设备改造修订目 录画面遷移基本流程1表示30画面表示説明 31装配安全气囊工位装配OPDS控制盒工位登录面罩/合棉工位确认安全气囊加强带SAB_OPDS初期化工程检查乘坐感应器工位静音室检查工程2345689信息一览扫描仪的设置方法设置方法326373839428完成検査工程11固定部編集転送方法4347画面操作説明画面操作説明（共通工程）13温湿度的动向画面14维修画面装配安全气囊装配OPDS控制盒装配面罩/将强带SAB_OPDS初期化5成品检查6成品装盘151617181920显示系统状态画面22参数设定SAB_OPDS初期化乘坐感应器静音室参数设定232425打印条码This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.打印条码打印条码（扫描）打印条码（输入）2728DWG.NO.29This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.3主画面关闭报警维护显示维护状态強制结束参数设定打印条码 （扫描）打印条码 (输入）1DWG.NO.温湿度表示（仅乘坐感应器工位）现在时间显示现在时间。（时间数据使用的是PLC内部時刻。）作業工程引导显示指触开关显示储存器报警显示各作業内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。触摸蜂鸣器关闭开关后，解除报警状态。 触摸维护开关就会切换至维护画面。内，实装的卡的储存容量以下，显示储存下限。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示成品装盘PLC FILEFULL报警成品装盘PLC的完成品条码储存FILE已满就会出现红色闪烁的显示。显示紧固状态显示紧固状态，如：有紧固：黄色紧固正常：緑色紧固异常：红色显示CV_IF状态下記状态时亮灯。接收发出的开始信号时：开始向发送工位作业完毕信号时：CV終了接收发出的强制終了信号时：CV強制終了DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木4REVISIONSCHECKED CHECKED208-07-07 现在时间显示现在时间。（时间数据使用的是PLC内部時刻。）作業工程引导显示指触开关显示储存器报警显示各作業内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。触摸蜂鸣器关闭开关后，解除报警状态。 触摸维护开关就会切换至维护画面。内，实装的卡的储存容量以下，显示储存下限。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示紧固状态显示紧固状态，如：有紧固：黄色紧固正常：緑色显示CV_IF状态下記状态时亮灯。接收发出的开始信号时：开始向发送工位作业完毕信号时：CV終了接收发出的强制終了信号时：CV強制終了DRAWNDATENAMEAPPROVED3DWG.NO.08-07-07加藤木5REVISIONSCHECKED CHECKED 现在时间显示现在时间。（时间数据使用的是PLC内部時刻。）作業工程引导显示指触开关显示各作業内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。触摸蜂鸣器关闭开关后，解除报警状态。 触摸维护开关就会切换至维护画面。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示CV_IF状态下記状态时亮灯。接收发出的开始信号时：开始向发送工位作业完毕信号时：CV終了接收发出的强制終了信号时：CV強制終了DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木6REVISIONS4CHECKED 现在时间显示现在时间。（时间数据使用的是PLC内部時刻。）作業工程引导显示指触开关显示各作業内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。触摸蜂鸣器关闭开关后，解除报警状态。 触摸维护开关就会切换至维护画面。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示CV_IF状态下記状态时亮灯。接收发出的开始信号时：开始向发送工位作业完毕信号时：CV終了接收 发出的强制終了信号时：CV強制終了DRAWNDATENAMEAPPROVED5DWG.NO.08-07-07加藤木7REVISIONSCHECKED现在时间显示现在时间。（时间数据使用的是的时刻。）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关操作部。显示储存器报警This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd. 内，实装的卡的储存容量以下，显示储存下限。DRAWNDATENAMEAPPROVED8DWG.NO.08-07-07加藤木6REVISIONS现在时间显示现在时间。（时间数据使用的是的时刻。）作业工位引导显示显示各作业内容。显示下一步的作业指示异常信息等。发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关操作部。显示储存器报警This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd. 内，实装的卡的储存容量以下，显示储存下限。DRAWNDATENAMEAPPROVED8DWG.NO.08-07-07加藤木REVISIONS7现在时间显示现在时间。（时间数据使用的是的时刻。）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。指触开关温湿度表示蜂鸣器关闭维护的各指触开关操作部。显示储存器报警This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd. 内，实装的卡的储存容量以下，显示储存下限。DRAWNDATENAMEAPPROVED9DWG.NO.08-07-07加藤木REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0382. 画面显示说明 7.1 在线状态主画面说明（LH,RH静音室检查工程）4123412 This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.3 座椅识别码 显示当前作业内容(座椅类别指示;座椅检测项目OK or NG指示;安全带及加热器电流设定值和当前值显示。)安全带状态指示： 加热器状态指示： 画面切换按钮。 左/右座椅指示。DRAWNDATENAMEAPPROVEDDWG.NO.1008-07-07加藤木REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0392. 画面显示说明 7.1 离线状态主画面说明（LH,RH静音室检查工程）3214 座椅识别码 显示当前作业内容(座椅类别指示;座椅检测项目OK or NG指示;安全带及加热器电流设定值和当前值显示。)安全带状态指示： 加热器状态指示： 画面切换按钮。 左/右座椅指示。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd. DRAWNDATENAMEAPPROVED11DWG.NO.08-07-07加藤木REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-03102. 画面显示说明 8.1 主画面显示说明（完成检查工程）现在时间显示现在时间。（时间数据使用的是的时刻。）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关操作部。显示储存器报警This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.内，实装的卡的储存容量以下，显示储存下限。DRAWNDATENAMEAPPROVED12DWG.NO.08-07-07加藤木REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-03112. 画面显示说明 8.2 主画面显示说明（完成品装盘工程）现在时间显示现在时间。（时间数据使用的是的时刻。）作业工位引导显示显示各作业内容。計显示下一步的作业指示异常信息等。发生异常时、亮灯。指触开关蜂鸣器关闭维护的各指触开关操作部。显示储存器报警This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.内，实装的卡的储存容量以下，显示储存下限。DRAWNDATENAMEAPPROVED12DWG.NO.08-07-07加藤木REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0312This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.维护关闭蜂鸣器确认PLC的状态、接续状况，实施设定打印条码等时，触摸指触开关即可切换至维护画面。此指触开关，为了防止误操作，需要连续触摸秒才可切换至维护画面。停止发生异常时所响起的警报。并且、使用强制复位钥匙也可关闭蜂鸣器。温湿度表示切换至温湿度表示画面。DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木13REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0313温湿度数据（图表）温湿度数据（数値）温湿度上下限値（数値）用图标来显示温湿度数据。 現在的温湿度用数值来显示数据。设定温湿度数据的上下限。温湿度監視设定温湿度監視的有効無効。This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.返回返回主画面。DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木14REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0314This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示系统状态显示PLC的模块状态。打印条码（扫描）显示固定部登録数据设定SAB MODULE螺丝的个数传送带単独/连动切换显示条形码打印画面。 可以打印出所扫描的条码。可登录各L/R1的部品番号及各编码，可显示装配有无模式。（最大各件）设定SAB MODULE螺丝的紧固数。根/根 进行传输带单独/连动的切换。単独：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。条形码打印（扫描）固定部登録可设定任意编码并可打印。若想使用此机能需要输入密码。下载数据 在下载DT100A的CF卡内的固定部数据时应该是ON的状态。返回返回主画面。输入密码画面选择条形码打印开关后（出入），就会弹出（请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。DWG.NO.密码：的位数。DRAWNDATENAMEAPPROVED08-07-07加藤木15REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0315This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示系统状态显示PLC的模块状态。显示固定部登録 数据传送带単独/连动切换可登录各L/R1的部品番号及各编码，可显示装配有无模式。（最大各件）进行传输带单独/连动的切换。単独：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。固定部登録下载数据在下载DT100A的CF卡内的固定部数据时应该是ON的状态。返回返回主画面。DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木16REVISIONSCHECKED CHECKED08-07-07村瀬NA503234-0316This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.显示系统状态显示PLC的模块状态。显示固定部登録 数据传送带単独/连动切换可登录各L/R1的部品番号及各编码，可显示装配有无模式。（最大各件）进行传输带单独/连动的切换。単独：与传输带状态无关，可单独进行单工位作业。连动：接收到传输带发出的开始信号就可实施工位作业。返回返回主画面。DRAWNDATENAMEAPPROVEDDWG.NO.08-07-07加藤木17REVISIONS17CHECKED CHECKED系统状态显示強制结束显示PLC的模块状态。中断PLC处理，强制返回至初始化。 为防止误操作，需要触摸此秒才会实行处理。参数设定根据导通阻抗的各测量值、从而显示界限值（上下限値）的设定画面。固定部登録 数据表示固定部登録可登录各的部品番号及車種编码、可显示検査模式。（最大各件）数据下载 在下载DT100A的CF卡内的固定部数据时应该是ON的状态。可手动操作夹具的夹紧、定位销及座椅汽缸支架的作动。治具手動操作This material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.返回可操作乘坐感应器工位重锤装置的上升 下降。返回主画面。DRAWNDATENAMEAPPROVED18DWG.NO.08-07-07加藤木18REVISIONSCHECKED CHEThis material and the information herein is the property of Fuji Electric Co.,Ltd. They sall be neither reproduced, copied, lent, or disclosed in any wa y wha tsoev er for the use o f any third pa rty, nor used for the manufacturing purposs without the express written consent of Fuji Electric Co.,Ltd.系统状态显示強制结束条形码打印（扫描）条形码打印（输入）显示PLC的模块状态。中断PLC处理，强制返回至初始化。 为防止误操作，需要触摸此秒才会实行处理。显示条形码打印画面。可打印出用扫描仪所扫描的条形码。可设定任意编码并可打印。若想使用此机能需要输入密码。返回返回主画面。输入密码画面选择条形码打印开关后（出入），就会弹出（请输入密码）的画面，然后输入密码、触摸。触摸取消开关的话，（请输入密码）画面关闭。密码：的位数