NFvehiclestandards法国车辆标准.doc

法国车辆标准(NF vehicle standards)ANSI| BS| DIN| EN| GB| ISO| JIS| NF| DIC 编号中文名称英文名称NF A50-110-12-2003 铝和铝合金.废料.第12部分:一种合金组成的车床切屑 (Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.) NF A82-041-1987 电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范 (Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.) NF A82-113-1996 电阻焊设备.汽车工业中多点点焊用带两个单独副线圈的变压器的特殊规范 (RESISTANCE WELDING EQUIPMENT. PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY. (EUROPEAN STANDARD EN ISO 7284).) NF C20-003-5-1997 环境条件分类.第3部分:环境参数及其严酷度组的分类.第5节:地面车辆装置 (Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 5 : ground vehicle installations.) NF C46-904-6-2001 使用配电线运载系统的配电车.第6部分:A-XDR编码规则 (Distribution automation using distribution line carrier systems - Partie 6 : A-XDR encoding rule.) NF C47-740-1995 家用和类似用途的自动电控制设备.第2部分:汽车启动继电器的特殊要求 (Automatic electrical controls for household and similar use. Part 2 : particular requirements for motor starting relays.) NF C58-982-2-2003 电动道路车辆驱动用二次电池.第2部分:动态放电性能试验和动态耐久试验 (Secondary batteries for the propulsion of electric road vehicles - Part 2 : dynamic discharge performance test and dynamic endurance test.) NF C58-982-3-2002 电动道路车辆推进用蓄电池.第3部分:性能和寿命试验(城市车辆的交通相容性) (Secondary batteries for the propulsion of electric road vehicles - Part 3 : performance and life testing (traffic compatible, urban use vehicles).) NF C63-975-2-1-2002 电动车辆充电系统.第 21部分: 对交/直流电源导电连接的电动车辆的要求 (Electric vehicle conductive charging system - Part 21 : electric vehicle requirements for conductive connection to an a.c./d.c supply.) NF C63-975-2-2-2002 电动车辆充电系统.第 22部分: 交流电动车辆充电站 (Electric vehicle conductive charging system - Part 22 : AC electric vehicle charging station.) NF C72-101-3-2003 白炽灯.安全规范.第3部分:卤钨灯(非车用) (Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).) NF C72-105-2003 卤钨灯(非车辆用).性能规范 (Tungsten halogen lamps (non-vehicle) - Performance specifications.) NF C73-895-2002 家用和类似用途电器的安全.第2-95部分:住宅用垂直移动汽车门驱动装置的特殊要求 (Safety of household and similar electrical appliances - Part 2-95 : particular requirements for drives for vertically moving garage doors for residential use.) NF C91-012-2002 车辆,船舶,内燃机驱动装置.无线电干扰特性.不包括那些安装在车辆/小船/自身有驱动的装置中的或类似车辆/小 () NF C91-025-2003 车载、船载和设备上的接收机保护用无线电干扰特性.极限值和测量方法 (Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices - Limits and methods of measurement.) NF D35-357-2000 专用液化石油气设施规范.车辆和小艇中安装的房间用密封式液化石油气空间加热设备 (Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats.) NF D35-358-2003 旅游居住车和其他道路车辆的液化石油天然气装置用规范 (Specification for the installation of LPG-systems for habitation purposes in leisure accommodation vehicles and other road vehicles.) NF E03-501-1970 ISO微型车螺纹.牙形件 (ISO miniature screw file.) NF E03-502-1970 ISO微型车螺纹.总图 (ISO miniature screw threads.general plan.) NF E03-503-1970 ISO微型车螺纹.公差.总图 (ISO miniature screw threads.tolerances.general plan.) NF E03-504-1970 ISO微型车螺纹.公差.极限尺寸表 (ISO miniature screw threads.tolerances.tables for limits of sizes.) NF E26-115-1993 摩托车圆链.特性和试验方法 (MOTOR CYCLE CHAINS. CHARACTERISTICS AND TEST METHODS.) NF E29-733-2001 气瓶.用作机动车燃料的天然气的车上存储用高压气瓶 (Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles.) NF E29-735-2004 移动式气瓶.蓄电池动力车.设计、生产、标识和检验 (Transportable gas cylinders - Battery-vehicles - Design, manufacture, identification and testing.) NF E29-780-2002 可运输储气瓶.永久气体和液化气(乙炔除外)用蓄电池驱动车辆.灌装时的检验 (Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) NF E52-043-1981 起重和装卸.手动链式滑车.术语和一般特性 (Lifting and handling. Hand-operated chain hoists. Terminology and general characteristics.) NF E52-057-1981 起重和装卸.手摇滚筒式绞车.术语和一般特征 (Lifting and handling. Hand-operated drum winches.) NF E52-060-1981 起重和装卸.电动滑车.术语和一般特性 (Lifting and handling. Electrically-operated hoists.) NF E52-093-1974 起重和装卸.手动链式滑车.一般设计规则.试验 (LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLOCKS GENERAL RULES FOR CONSTRUCTION. TESTS.) NF E52-094-1975 起重和装卸.手动链式滑车.使用规则(手拉葫芦除外) (LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLACKS. GENERAL RULES FOR USE. (EXCLUDING BLOCKS WITH OPERATING HANDLE).) NF E52-096-1975 起重和装卸.手摇滚筒式绞车.使用规则 (LIFTING AND HANDLING. MANUALLY OPERATED DRUM HOISTS. GENERAL RULES FOR USE.) NF E52-115-2-2000 提升设备.分类.第2部分:汽车起重机 (Lifting appliances - Classification - Part 2 : mobile cranes.) NF E52-300-1978 轻便机车上安装的安全装置.特征和检验 (DEAD MANS DEVICES FOR LOCOTRACTOR. SPECIFICATIONS AND CHECKINGS.) NF E56-005-1-2003 地下采矿机械.地下作业用移动机械.安全.第1部分:橡胶轮胎车辆 (Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles.) NF E56-005-2-2003 地下采矿机械.地下作业用移动机械.安全.第1部分:轨道机车 (Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives.) NF E58-007-1993 土方机械.翻斗车.术语和工业规范 (Earth-moving machinery. Dumpers. Terminology and commercial specifications.) NF E58-053-2000 土方机械.翻车保护结构.实验室试验和性能要求 (Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.) NF E58-110-1999 道路建筑车辆.沥青混合成套设备.安全要求.(EN 536) (ROAD CONSTRUCTION MACHINES. ASPHALT MIXING PLANTS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 536).) NF E58-120-1996 土方机械.安全.第6部分:自动倾卸车的要求 (EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).) NF E58-155-1995 土方机械.翻斗车身支架和操作舱翻转支架装置 (EARTH-MOVING MACHINERY. DUMPER BODY SUPPORT AND OPERATORS CAB TILT SUPPORT DEVICES.) NF E60-022-1971 车床丝杠的螺矩(数控车床除外) (PITCHES OF SCREW LEAD OF LATHES (OTHER THAT NUMERICAL CONTROLLED LATHES).) NF E60-101-1997 通用平行车床的合格条件.精度测试 (Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.) NF E60-102-1976 数控卧式车床的试验条件.精确度检验 (TEST CONDITIONS FOR NUMERICAL CONTROL PARALLEL LATHES. TESTING OF THE ACCURACY.) NF E60-103-1998 机床.卧式轴六角自动车床和卧式单轴自动车床的试验条件.精度试验 (Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.) NF E60-105-1984 单柱或双柱立式车床.验收条件和名称.第1部分:概述 (Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.) NF E60-106-1984 单柱或双柱立式车床.验收条件和名称.第2部分：固定或可移动卡盘车床.精确度检验 (Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.) NF E60-107-1985 机床.仿形车床和仿形辅助装置.验收条件.精确度检验 (Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.) NF E60-150-1965 机车.车间计量学原理 (MACHINE TOOLS. PRINCIPLES OF WORKSHOP METROLOGY.) NF E60-273-1991 机床.测量噪音的常规工作条件.车床 (Machine tools. Conventional working conditions for measurement of noise. Turning machines.) NF E60-415-1989 机床.车床和顶心.保护装置强度的试验 (MACHINES TOOLS. LATHES AND TURNING CENTRES. STRENGTH TESTS FOR GUARDS.) NF E60-416/A1-2003 机床的安全.小型数字控制的转向车床和转向中心 (Safety of machine tools - Small numerically controlled turning machines and turning centres.) NF E60-417-2001 机床的安全.大型数字控制的转向车床和转向中心 (Safety of machine tools - Large numerically controlled turning machines and turning centres.) NF E60-418-2001 机床的安全.带和不带自动控制的手控车床 (Safety of machine-tools - Manually controlled turning machines with or without automatic control.) NF E60-425-2002 机床.安全性.多轴自动车床 (Machine tools - Safety - Multi-spindle automatic turning machines.) NF E62-105-1997 机床.车床顶尖.互换尺寸 (Machine tools. Lathe centres. Sizes for interchangeability.) NF E62-110-1997 车床切削工具.轴头和面板.可互换性尺寸.第2部分:凸轮锁型 (Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.) NF E62-111-1976 车床主轴头部和卡盘.卡口型 (LATHE SPINDLE NOSES AND BACK PLATES. TYPE BAYONET.) NF E64-061-1983 木材加工机械.普通车床.验收条件和术语.精确度检验 (Woodworking machines. Acceptance conditions and nomenclature for turning lathes. Precision testing.) NF E66-303-2000 车刀和刨刀柄.选择形状和尺寸 (Shanks for turning and planning tools - Shapes and dimensions of the section.) NF E66-305-1969 车刀的金属碳化物刀片 (CARBIDE TIPS FOR TURNING TOOLS.) NF E66-311-1995 可转位刀片的车刀和仿形刀刀柄和刀片座.名称与牌号 (Turning and copying tool holders and cartridges for indexable inserts. Designation.) NF E66-322-1984 车床工具.带硬金属钎焊刀片的自动车刀 (Turning tools. Tools with hardmetal inserts for turning on automatic machines.) NF E66-344-1999 带可转位刀片的车刀和仿形刀用单刃刀具夹头.尺寸 (Single-point tool holders for turning and copying, for indexable inserts. Dimensions.) NF E66-363-1966 高速钢合金车床刀具.偏刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.) NF E66-364-1966 高速钢合金车床刀具.倒角车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.) NF E66-365-1966 高速钢合金车床刀具.外圆车刀 (STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.) NF E66-366-1966 高速钢合金车床刀具.宽脸方头车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.) NF E66-367-1966 高速钢合金车床刀具.切槽刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.) NF E66-368-1966 高速钢合金车床刀具.切断车刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.) NF E66-369-1966 高速钢合金车床刀具.车外螺纹刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.) NF E66-370-1966 高速钢合金车床刀具.镗刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.) NF E66-371-1966 高速钢合金车床刀具.镗孔端面刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) NF E66-372-1966 高速钢合金车床刀具.扩孔镗刀 (TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.) NF E66-373-1966 高速钢合金车床刀具.车内螺纹刀具 (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.) NF E66-510-1975 车床刀尖的圆弧半径 (Corner radius of single point cutting tools.) NF E66-551-1968 车床用刀架 (LATHE TOOL POSTS.) NF E86-012-1992 含空气或氮气的不用火加热的简单压力容器.第2部分:用于汽车及其挂车制动和辅助系统的压力容器 (Simple unfired pressure vessels designed to contain air or nitrogen. Part 2 : pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers.) NF E86-500-2-2000 冷冻车辆.最大容量不超过1000升的便携隔绝车辆.第2部分:设计,生产,检验和试验 (Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2 : design, fabrication, inspection and testing.) NF E86-502-1-2002 低温车辆.大型可运输真空绝缘车辆.第1部分:基本要求 (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1 : fundamental requirements.) NF E86-502-3-2002 冷冻车辆.大型可运输真空绝缘车辆.第3部分:运行要求 (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.) NF E86-511-2001 低温车辆.低温柔性软管 (Cryogenic vessels - Cryogenic flexible hoses.) NF E86-514-2000 冷冻车辆.冷冻服务用泵 (Cryogenic vessels - Pumps for cryogenic service.) NF E90-411-2002 机械振动.工业货车.驾驶员座椅振动的实验室评价和规范 (Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration.) NF E90-451-1-1994 机械振动.车辆座位振动评价的实验室方法.第1部分:基本要求 (Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1 : basic requirements.) NF F00-072-1990 铁路车辆.密实橡胶制挤压件 (GENERAL RAILWAY EQUIPMENT. COMPACT-RUBBER EXTRUDED PARTS.) NF F00-103-1987 铁路车辆.概论.有关铁路经济的量、单位和符号.定义和起草规则 (ROLLING STOCK. GENERALITIES. QUANTITIES,UNITS AND SYMBOLS RELATING TO THE RAILWAY ECONOMICS. DEFINITIONS AND DRAFTING RULES.) NF F00-125-1-1999 铁路设施.设备的环境条件.平板车辆上的设备 (Railway applications - Environmental conditions for equipment - Part 1 : equipment on board rolling stock.) NF F00-701-1993 铁路设备梗概.车辆每个车轮静态负荷的测量.称重设备和控制 (RAILWAY EQUIPMENT IN GENERAL. MEASUREMENT OF THE STATIC LOADS PER EACH WHEEL OF THE VEHICLES. WEIGHING INSTALLATIONS AND CONTROL.) NF F00-702-1998 铁路设施.机车和轨道间的动态相互作用.力测量法 (RAILWAY APPLICATIONS. DYNAMIC INTERACTION BETWEEN VEHICLES AND TRACKS. FORCE MEASUREMENT METHOD.) NF F01-002-1972 铁路车辆.绞链 (RAILWAY TRANSPORT EQUIPMENT. HINGE PLATES.) NF F01-003-1974 铁路车辆.涂漆或类似铭牌用的字体 (RAILWAY TRANSPORT EQUIPMENT. LETTERS FOR PAINTED OR SIMILAR INSCRIPTIONS.) NF F01-014-1974 铁路车辆.型和型车轴 (RAILWAY TRANSPORT EQUIPMENT. TYPE A AND C MACHINING CENTRES FOR AXLES.) NF F01-015/AM1-1977 火车运输设备.带有开槽螺纹末端的非钻孔轴.开槽螺纹末端 (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH GROOVED SCREW-ENDS. GROOVED SCREW-ENDS.) NF F01-018-1971 铁路运输设备.带螺纹端头和有槽端头的未钻孔轴.车轮抱闸装置 (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH THREADED AND SLOTTED ENDS. WHEEL LOCKING DEVICES.) NF F01-026-1986 铁路车辆.车轴.轮,轮箍和轮副的标记.标记定义 (Rolling stock. Marking of the axles, wheels, tyres and wheels sets. Definition of the marks.) NF F01-027-1981 铁路运输设备.车轴标记.用mm表示尺寸 (Railway transport equipment. Marking of the axles. Dimensions in millimetres.) NF F01-028-1987 铁路车辆.车轮标记 (Rolling stock. Marking of wheels and tyres.) NF F01-030-1976 铁路车辆.中型绞链 (RAILWAY TRANSPORT EQUIPMENT. MEDIUM SIZED HINGES.) NF F01-031-1976 铁路车辆.大型铰链 (RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.) NF F01-032-1976 铁路车辆.中型和大型铰链. 轴 (RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.) NF F01-033-1975 铁路车辆.槽钢弹簧片定中心用的定位销 (RAILWAY TRANSPORT EQUIPMENT. STEADY PINS FOR CENTERING LAMINATED SPRINGS IN GROOVED PLATES.) NF F01-034-1970 铁路车辆.属于一个铁路管理机构的集装箱和各种车辆（机车除外）的识别牌 (RAILWAY TRANSPORT EQUIPMENT. IDENTIFICATION PLATE FOR CONTAINERS AND ALL VEHICLES (OTHER THAN LOCOMOTIVES) BELONGING TO A RAILWAY ADMINISTRATION.) NF F01-035-1970 铁路车辆.特种车辆的许可证和识别牌 (RAILWAY TRANSPORT EQUIPMENT. AUTHORIZATION AND IDENTIFICATION PLATE FORPRIVATELY-OWNED VEHICLES.) NF F01-039-1972 铁路车辆.联接钮 (RAILWAY TRANSPORT EQUIPMENT. HOOKING PINS.) NF F01-041-1972 铁路车辆.手柄. 外形尺寸. 安装 (RAILWAY TRANSPORT EQUIPMENT. HANDLES - GAUGES - FIXINGS.) NF F01-042-1981 铁路车辆.铁路车辆和类似车辆运行中的定位标 (Railway trnasport equipment. Positioning of railway carriages and similar vehicles.) NF F01-044-1986 铁路器材.列车定位 (ROLLING STOCK. ORIENTATION OF THE LIFT OF CARRIAGES.) NF F01-046-1970 铁路车辆.冷弯或热弯钢板弹簧.组弹簧片.公差 (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. MOUNTED SPRINGS. TOLERANCES.) NF F01-047-1974 铁路车辆.热弯或冷弯钢板弹簧.板簧片 (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. SPRING LEAVES.) NF F01-048-1970 铁路车辆.热弯或冷弯钢板弹簧, 弹簧箍. 公差. 工作尺寸 (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. FLANGES. TOLERANCES. FUNCTIONAL DIMENSIONS.) NF F01-049-1974 铁路车辆.热弯或冷弯钢板弹簧. 型键. 销. 边 (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS : U.I.C. TYPE WEDGES. KEYS. CHOCKS.) NF F01-054-1972 铁路车辆.板手控制的活动方块装装置. 极限尺寸 (RAILWAY TRANSPORT EQUIPMENT. BERNE KEY OPERATED SOCKETS. DIMENSION LIMITS.) NF F01-055-1988 铁路车辆.紧线器. 信号灯和牵引杆 (ROLLING STOCK. TURNBUCKLES AND DRAW BARS FOR TIGHTENERS.) NF F01-079-1979 铁路车辆.轮箍用四脚扣环 (RAILWAY TRANSPORT EQUIPMENT. RECTANGULAR TYRE CLIP.) NF F01-080-1979 铁路车辆.绞孔轮箍. 公差（用四角环扣安装） (RAILWAY TRANSPORT EQUIPMENT. BORED TYRES. TOLERANCES. (FITTED WITH RECTANGULAR TYRE CLIP).) NF F01-082-1968 铁路车辆.管路. 软管接头（非金属） (RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.) NF F01-082M-1970 铁路车辆.管路.软管接头(非金属) () NF F01-084-1982 铁路车辆.管路. 双锥形连接环 (Railway transport equipment. Pipework. Biconical rings.) NF F01-101-1991 铁路车辆.铁路车辆.按法国NF 01-501标准的设计样板制作的铁路车辆举升装置 (RAILWAY ROLLING STOCK. LIFTING OF RAILWAY VEHICLES FITTING THE CONSTRUCTION GAUGE SPECIFED IN FRENCH STANDARD NF F 01-501.) NF F01-104-1971 铁路车辆.箱用轴承. 验收检验 (Railway transport equipment. Rolling bearings for railway axle-boxes. Acceptance inspection.) NF F01-115-1994 铁路车辆.标准轨道车辆的轮对. 特点 (Railway rolling stock. Wheel profils for standard gauge rolling stock. Characteristics.) NF F01-116-2001 铁路车辆.车轮组件和转向架.非动力轴.设计方法 (Railway applications - Wheelsets and bogies - Non-powered axles - Design method.) NF F01-117-2001 铁路车辆.车轮组件和转向架.动力轴.设计方法 (Railway applications - Wheelsets and bogies - Powered axles - Design method.) NF F01-120-1982 铁路车辆.车轴. 术语. 定义. 制图规则 (Railway transport equipment. Plain axles. Terminology. Definitions. Rules for the preparation of technical drawings.) NF F01-121-1989 轴承箱用车轴. 公差. 表面状态 (ROLLING STOCK. AXLES FOR ROLLER-BEARING AXLE-BOXES. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.) NF F01-123-1991 铁路车辆.车轴.实心轴.质量规定 (Railway rolling stock. Full axles. Quality requirements.) NF F01-124-1991 铁路车辆.空心车轴.质量要求.公差.表面的状况.特殊尺寸表示 (Railway rolling stock drilled axles. Quality requirements. Tolerances. Surface conditions. Special dimensional indications.) NF F01-125-1984 铁路车辆.轮对. 术语. 定义. 制图规则 (ROLLING STOCK. WHEELSETS. TERMINOLOGY. DEFINITIONS. RULES APPLICABLE TO DRAWING ARRANGEMENTS.) NF F01-130-1984 铁路车辆.车轮. 术语. 定义. 制图规则 (Rolling stock. Wheels. Terminology. Definitions. Rules applicable to drawing arrangements.) NF F01-131-1987 铁路车辆. 车轮. 公差. 表面状态. 特殊定尺寸元件 (ROLLING STOCK. WHEELS. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.) NF F01-133-1992 铁路车辆.整体车轮.质量要求 (Railway rolling stock. Solid wheels. Quality requirements.) NF F01-134-1990 铁路车辆.极高速列车用整体轮.规范 (RAILWAY ROLLING STOCK. SOLID WHEELS FOR VERY HIGH SPEED TRAINS. SPECIFICATIONS.) NF F01-141-1987 铁路车辆. 轴承部件. 验磁器检验 (Rolling stock. Running gear. Magnetoscopic examination.) NF F01-142-1990 铁路车辆.行走机构.超声检验 (Railway rolling stock. Running gear. Ultrasonic examination.) N