PSPC涂装日志.doc

DYMM03-64-2008 (C) PSPC作业文件 4/13RYMM03-64-02(C)COATING LOG (SECONDARY SURFACE PREPARATION)涂装日志（二次表面处理）HULL No. 船舶编号INSPECTION DATE检查日期BLOCK /TANK No.分段/舱柜编号CONSTRUCTION STAGE 建造阶段BLOCK STAGE分段阶段MIDDLE ERECTION STAGE合拢阶段HULL STAGE整体阶段SHARP EDGES 自由边REMARKS：备注WELDING BEADS 焊道WELD SPATTER 焊接飞溅物OTHER CONTAMINATION其他表面污染物METHOD, GRADE 方法/等级REMARKS：备注RELATIVE HUMIDITY 相对湿度(%)DEW POINT露点()SURFACE TEMP.表面温度()AMBIENT AIR TMPERATURE环境空气湿度()WATER SOLUBLE SALTS可溶性盐份含量REMARKS：备注PROFILES 粗糙度DUST灰尘OIL CONTAMINATION油污TYPE OF ABRASIVE磨料类型REMARKS：备注SIZE OF ABRASIVE磨料尺寸COATING INSPECTORS NAME:涂层检查员：SIGNATURE:签名：RYMM03-64-03(C)COATING LOG (COATING APPLICATION)涂装日志（涂装）HULL No. 船舶编号INSPECTION DATE 检查日期BLOCK /TANK No.分段/舱柜编号CONSTRUCTION STAGE 建造阶段BLOCK STAGE 分段阶段MIDDLE ERECTION STAGE合拢阶段HULL STAGE整体阶段FIRST COAT第一道涂层SECOND COAT第二道涂层BEFORE施涂前AFTER施涂后BEFORE施涂前AFTER施涂后INSPECTION DATE AND TIME检查日期及时间PERCENTAGE(%) OF DILUTION OF THE PAINT油漆稀释比例AMBIENT AIR TMPERATURE() 环境空气湿度BATCH NUMBER OF PAINT油漆批号RELATIVE HUMIDITY相对湿度(%)DEW POINT露点()SURFACE TEMP.表面温度()WATER SOLUBLE SALTS可溶性盐份含量-DUST 灰尘-OIL CONTAMINATION 油污-STRIPE COATS预涂MANUFACTURER涂料生产厂PRODUCT NAME OF COATING涂料产品名称PRODUCT IDENTIFICATION MARK/ NUMBER产品标识号/编号REMARKS:备注COATING INSPECTORS NAME:涂层检查员：SIGNATURE:签名：RYMM03-64-04(C)COATING LOG (DRY FILM THICKNESS MEASUREMENT)涂装日志（干膜厚度测量）HULL No. 船舶编号BLOCK /TANK No.分段/舱柜编号CONSTRUCTION STAGE 建造阶段BLOCK STAGE分段阶段MIDDLE ERECTION STAGE合拢阶段HULL STAGE整体阶段MANUFACTURER 生产厂PRODUCT NAME 产品名称PRODUCT IDENTIFICATION MARK/ NUMBER产品标识号/编号DRY FILM THICKNESS (m)干膜厚度(m)NUMBER OF POINTS测量数量RATIO百分比AFTERSECOND COAT第二道涂层后90%NDFT90%NDFTNDFT NDFTTOTAL100%MAXIMUM THICKNESS 最大厚度(m)MINIMUM THICKNESS 最小厚度(m)AVERAGE THICKNESS 平均厚度(m)REMARKS:备注COATING INSPECTORS NAME:涂层检查员SIGNATURE:签名RYMM03-64-05(C)SHIPYARDS VERIFIED INSPECTION REPORT涂装分段验收报告Vessel name船名Shipyard船厂No.序号Block/tank no.分段/压载舱号 Inspection date检查日期Remarks备注Shipyard signature船厂签字Owner signature船东签字123456789101112RYMM03-64-06(C)COATING INFORMATION FOR W.B.TK.压载舱涂层信息TANK压载舱HULL STAGE船体阶段BLOCK STAGE分段阶段CoatDateR.H &DEWImmer timeCommentBlock #AssembledCoatApp dateR.H &DEWD.F.T(max/min/avg)CommentNo.1.(C)F11(C)1st2ndF21(C)1st2ndNo.2.(S)SU17(S)1st2ndSL17(S)1st2ndNo.2(P)SU17(P)1st2ndSL17(P)1st2ndNo.3(