武汉工程大学综合文献检索报告

综合检索报告检索课题（中文）单片机的应用 （英文） The Application of SCM一、检索策略1、检索词：主题词（中文）:季铵盐消毒液（例）（英文）:QuaternaryAmmoniumSaltDisinfectant（例）相关词：（中文）单片机（英文）SCM副主题词：（中文）应用（英文）application2、构造检索式（布尔逻辑表达式或网络检索式）布尔逻辑表达式：单片机 and 应用二、检索来源（本文所查数据库名或其它来源）清华数据库，万方数据库，维普数据库，谷粉，超星电子图书，书生电子图书等等。三、检索结果：分别写出篇名、作者、文献来源（期刊指刊名、年、卷期；专利指专利号；学位论文指授予单位，标准指标准号等文摘形式）及摘要（有原文请注明），所有数据库均检索近10年的文献。1、 中文期刊（找5篇）：（必备） 篇名：MSP430系列超低功耗单片机及应用作者：杨平； 王威期刊：国外电子测量技术，2008年12期。【摘要】 本文分析了单片机应用中出现的一些新的趋势,介绍了MSP430系列超低功耗单片机在超低功耗、运算性能、开发工具、系统整合等方面的优势和特点。结合具体的实例,详细介绍了MSP430在工业控制、智能仪表、计算机网络与通信、日常生活等方面的典型应用,最后展望了MSP430系列单片机的应用前景。 篇名：DS18B20在温控系统中的应用作者：居荣； 郭怡倩期刊：农机化研究，2005年01期【摘要】 DS18B20是美国DALLAs半导体公司生产的1-WIRE数字温度传感器,它可实现直接数字化输出和测试,并且有控制功能强、传输距离远、抗干扰能力强、微型化、微功耗等特点。为此,详细介绍其主要技术性能及在单点温控系统中的应用。 篇名：论PLC、单片机、工控机在工业现场中的应用及选用方法作者：王起期刊：广西轻工业，2011年01期【摘要】 通过对PLC、单片机、工控机这三者特点的分析,结合工作经验,比较了三者在工业现场中应用领域的相同与不同之处,并给出了在不同自动控制方案中选用的方法,为设计人员提供参考。 篇名：单片机在农业工程中的应用作者：陈杰；期刊：农机化研究，2012年02期【摘要】 介绍了目前在我国农业工程领域的温室控制、播种机械、谷物干燥、粮仓、水果保鲜库、农机检测、水产养殖、灌溉、施肥、农用机器人以及其他一些比较有影响的单片机方面的应用。 篇名：单片机控制手机的硬软件接口技术及其应用作者：陈慧明； 李艳华； 王静滨；期刊：微计算机信息，2005年01期【摘要】 本文介绍了单片机与手机的硬软件接口技术,详细分析单片机控制手机的工作原理,给出一个基于手机短信息的应用实例。2、 外文期刊（找5篇）：（必备）篇名：Designs of a fire detecting and fire pre-warning system based on single chip microcomputer作者：Yishan Zeng, Jun Qian期刊：Procedia Engineering, 2010, Vol.7 , pp.360-365摘要： The paper mainly deals with the design of hardware for an automatic fire fighting system, which aimed at closed combustible places. This system adopts single chip microcomputer with smoke sensor and temperature sensor as the detective devices. By using the single chip microcomputer, it can achieve the aim of automatic fire fighting. And, this system uses high pressured nitrogen as the fire extinguishing agent, which is economical and environment friendly. It accords with the humans needs of environmental protection. 篇名：A Single Chip Microcomputer Based Instrument for Automated Cell Potential Measurement 作者：Chen Guang-dong, Lu Xiao-hua 期刊：Instrumentation Science & Technology, 1989, Vol.18 (1) 摘要：In this paper a scheme using an Intel MCS-51 single chip microcomputer to control an instrument for automated cell potential measurement is presented. The system hardware and control software are discussed in detail. The sampling of solutions, the measurement of samples, and the acquisition of data are controlled by a single chip microcomputer. This fully digitally controlled instrument is small in size and exhibits high reliability. 篇名：Design of LED Display Control System Based on AT89C52 Single Chip Microcomputer 作者: Yongxian Song, Yuan Feng, Juanli Ma, Xianjin Zhang 期刊: Journal of Computers, 2011, Vol.6 (4), pp.718-724 摘要: AbstractThis paper introduces display design process about hardware and software based on AT89C52 single chip microcomputer. We use a simple external circuit to control the display screen, which size is 32 192. The display screen also can display the size of the six 32 32 dot matrix Chinese characters by a dynamic scan mode, and can be divided into two small display screen, which can display twenty-four Chinese characters whose size is 1616. We can modify the code to change the content of the display, subtitles can achieve scrolling function and the scroll speed can be adjusted according to requirements, subtitles can also achieve pause function. The Chinese character code stored in external data memory, the capacity of data memory is expanded according to. the requirements of Chinese characters we want to show. This display screen has advantages of small volume, few hardware and simple circuit structure. 篇名：SINGLE CHIP MICROCOMPUTER-BASED CURRENT SOURCE INVERTER 作者: Guangdong Chen 期刊: Electric Power Components and Systems, 1989, Vol.16 (1) 摘要：In this paper is presented a scheme on single chip microcomputer to control the current source inverter, three chips of the microcomputer are used to perform three main parts of the task: the dual-proportional plus integral controller for the voltage and current loops, the firing circuit for three-phase six-thyirstor converter with compensation of nonlinear relationship between input and output, and the function generator and ring counter for inverter. With the help of this full digital control scheme, the current source inverter is of lower cost and higher reliability, and consist;s of minimum components. 篇名：Design of an arbitrary waveform signal generator 作者：Xiao Chen, Jianxiang Chen 期刊：Procedia Engineering, 2011, Vol.15 , pp.2500-2504 摘要：Signal generator plays a very important role in communication, electronic measuring instruments, electronic circuits, automatic control, radar and other electronic systems. Direct Digital Synthesis (DDS) technology can easily control the frequency of the signal for direct synthesis of waveforms. This paper designed a signal generator with the amplitude and frequency modulation by using AD9850 as frequency synthesizer and AT89S52 single chip microcomputer (SCM) as the core. Detailed design principle and idea are discussed. AD9850 of the DDS chip is used to generate the waveform. The frequency data of external input can be transformed to frequency phase control words of chip by simple parallel or serial communication interface with the single chip microcomputer. Amplitude modulation is. realized by the AD7520 chip. The system is not only simple in structure, easy to implement, but also convenient and cheap. It has a theoretical and practical value. 3、 专利文献（中外文各找2篇）：（工科必备）篇名：一种基于单片机应用的发动机实验装置专利号：ZL CN4.4发明人：张齐龙;王少勇;朱征摘要：本实用新型公开了一种基于单片机应用的发动机实验装置,其特征在于,包括单片机,步进电机,继电器,高压油泵,喷油嘴,数码相机。其中,单片机的输出端分别与继电器,数码相机相连。本实用新型对以往传统的发动机喷油实验操作进行了改进,提高了工作效率,降低了研发成本,该装置在发动机实验应用领域有较好的应用前景。篇名：嵌入式单片机应用技术项目实训系统专利号：ZLCN2.4发明人：张玉馥;李庆辉;闫宗梅;吴尚摘要：本发明提供一种真实单片机系统实际设计、开发、调试过程的嵌入式单片机项目化生产性实训教学设备,包括一工作台,工作台上集合有计算机、稳压电源、TOP2009编程器和若干个独立存在的项目实训模块,每个实训模块分别具有供电电路、CPU、与CPU连接的外围功能电路。本系统由若干个实训模块组成,各实训模块都是一个完全独立的系统,自成一体,这样不仅减少各部件的相互混绕,使各部件连接、信息传递清晰,而且整个电路简洁,易于分析和理解。此外,本发明首创项目化单体式单片机实训设备系统,项目典型实用,电路优化,降低了嵌入式单片机应用技术课程讲授和学习的难度,为产品开发式实训创造了条件,开辟了提高学生技能训练的新途径。 篇名：MCU APPLICATION PROGRAM VERIFICATION SYSTEM PROVIDING SOURCE CODE LEVEL DEBUGGING USING DEBUGGING INFORMATION FILES IN DIFFERENT专利号：KRA发明人：HAN, MIN JA;HAN MIN JA摘要：An MCU(Micro Controller Unit) application program verification system for debugging debugged source codes and updated source code in a source code level debugging with debugging information files generated from different versions, and a method thereof are provided to simultaneously debug the debugged/updated source codes in the source code level without changing an image corresponding to the debugged source codes. An I/O(Input/Output) device(100) outputs debugging instruction information by processing a debugging instruction inputted from a user through a user interface(310) and displays debugging information output corresponding to the debugging instruction information. A central controller(200) dynamically assigns priority to each debugging information files by receiving the source code(320) and the debugging information file corresponding to each source codes through a debugger(340). The central controller preferentially finds/outputs the debugging information through the debugging information file of the high priority. If the debugging information is not founded, the central controller finds/outputs the debugging information through the debugging information file of the next priority.篇名：Single-chip microcomputer with application specific integrated circuit.专利号：EPA发明人：NISHIGUCHI YUKIHIRO C O NEC CO摘要：A single-chip microcomputer is constituted by a single-chip microcomputer core (4), an external bus interface circuit (1), an external bus, a logic circuit (3) and a bus interface (2). For asynchronously accessing to an exterior from the single-chip microcomputer core, the external bus interface circuit produces an asynchronous access control signal to the exterior based on an access control signal from the single-chip microcomputer core. The internal bus interconnects the single-chip microcomputer core and the external bus interface circuit, and the logic circuit is asynchronously accessible to and from the single-chip microcomputer core. The bus interface circuit is connected to the internal bus and produces an asynchronous access control signal to the logic circuit based on an access control signal inputted through the internal bus. Even when the user logic unit is designed with operating clocks independent from the operating clocks of the single-chip microcomputer, the function of the user logic unit is not bound by any significant limitations, and the number of steps involved in preparing the user logic test pattern is reduced. 4、 学位论文（中外文各找2篇）：（必备）篇名：单片机与Internet网络的通信应用研究作者：刘建超授予单位：山东师范大学摘要：随着计算机通信技术、电子信息技术和多媒体技术的飞速发展,Internet网络日益成为人们日常生活中必不可少的工具。信息家电、智能化仪表等需要与Internet网络连接的非PC设备越来越多。就目前来看,在非PC设备中,大约有50%左右的是8位的微处理器。若想实现这些设备与Internet网络的通信,必须扩展8位微处理器的网络功能。本文提出了单片机与Internet网络通信的一种具体实现方案。鉴于8位小型微型单片机系统的广泛应用,在深入学习了解了高性能的32位单片微处理器与Internet网络的通信应用之后,选择目前较为流行的八位单片机和以太网控制芯片构成单片机网络通信系统,并在此基础上成功的将经过裁剪的TCP/IP协议移植到系统中,在此基础上设计并实现了嵌入式webserver应用:客户端通过浏览器中的网页实时操纵单片机应用系统LED小灯的亮灭。由于8位单片机的内部资源有限,根据其自身特点和实际应用的需要,必须对TCP/IP协议进行适当的裁剪。本系统在设计过程中,选择了TCP/IP协议各层最具代表性的协议,并对其进行裁剪,将裁减后的协议移植到系统中后,经实验证明系统运行良好,达到了预期的目的。论文首先根据需要,设计以太网接口电路,编写以太网驱动程序;对TCP/IP协议进行适当裁减,以适应8位单片机内部资源,并进行移植;实现了webserver应用,通过对HTTP协议分析,在单片机内部实现了HTTP协议,并用HTML语言编写web页面,把网页保存到单片机内部的ROM中,通过Internet explorer浏览器可以远程访问网页,并实现对系统的实时监控、操纵。根据webserver应用在单片机中实现的具体需求,设计摒弃了嵌入式实施操作系统,直接实现了TCP/IP协议,大大缩短了开发的时间;本文最大的特点是在8位单片机中实现了webserver应用,对单片机系统的控制和监测变得简便、直观。使用HTML语言编写了网页,并将源代码以字符数组的形式存储在单片机的EEPROM中,读取时可以以访问数组的形式访问代码,巧妙地绕过了操作系统对文件读取的限制,并且提高了系统的运行效率。以单片机为核心的小型微型嵌入式系统必将在教育领域得到广泛应用。目前,高校信息资源建设正如火如荼,软件信息资源的共享,使得教育极大的便利化,教育投资的效益迅速提高。但是,硬件资源难以共享。有了嵌入式技术的支持,在精密仪器中植入小型的嵌入式芯片,就可以通过操作嵌入到单片机内部的web页面的按钮,远程实时操纵仪器,并通过单片机采集数据,传输到本地计算机,并且用浏览器将信息图文并茂的显示,可以方便的得到实验数据。实现校园硬件设备的共享,可以大大节省人力物力,具有极大的经济效益,对教育信息化发展具有积极的推动作用。篇名：基于PROTEUS的单片机仿真实验系统研究及应用作者：刁宇清授予单位：西安工业大学摘要：本文根据电子系统设计,特别是单片机应用系统开发设计不能充分利用现代技术手段,开发周期长,严重影响产品生命周期,滞后工程应用需求的问题,同时根据高等教育中,电子技术和单片机应用技术课程实验教学不能满足应用型,创新型人才培养需求的问题,依托陕西理工学院“电力系统及其自动化”重点学科基于Proteus虚拟单片机应用系统和实验教学系统研发的建设项目,采用Proteus强大的设计,仿真软件功能,构建一个电子系统,特别是单片机应用系统的开发平台,构建一个适应现代人才培养需求的虚拟实验系统。在认真研究,挖掘Proteus仿真软件强大功能的基础上,结合电子系统设计,特别是单片机应用系统设计过程、方法、手段、环境条件,重点是结合单片机应用技术专业人才培养实验教学的规律特点和单片机应用技术的发展趋势,运用了计算机仿真技术,构建了基于Proteus的虚拟实验系统,论述了实验系统的构建的方法与方案。在构建Proteus虚拟实验系统的基础上,开发了模拟电子技术,数字电子技术,单片机应用技术的实验应用实例。所构建的Proteus虚拟实验系统也可作为单片机应用系统开发设计的平台。经实验应用实例验证,所构建的基于Proteus虚拟实验系统方案合理,方法得当,能满足单片机应用技术专业人才培养的需求,能有效激发学生的自主学习和创新意识和创新能力,同时可作为单片机应用系统研发的平台论文共分四章。第一章论述了选题背景及意义,描述了虚拟实验系统开发的必要性,紧迫性和可行性；第二章分析了Proteus功能及其利用；第三章论述了基于Proteus构建虚拟实验系统(单片机研发平台)的构建方案,给出了三大类10个实验应用实例；第四章对论文工作进行了总结与展望。 篇名: Quantitative capacitance measurements using a scanning probe microscope. 作者：Ott, Michael.授予单位：University of Ottawa (Canada)摘要：This thesis describes the theory, simulation and experimental implementation of a method by which an atomic force microscope with scanning capacitance microscopy (SCM) capability can be employed in a nontraditional fashion to quantitatively measure the capacitance of metal-oxide-semiconductor (MOS) structures. The capability to deduce sample capacitances is based on resonant frequency shifting, which relies on the SCMs ultra-precise capacitance sensor. The technique, however, is distinct from scanning capacitance microscopy imaging, with the MOS capacitor an integral part of the system resonant circuit. SPICE simulations are performed to extract phenomenological resonant circuit parameters specific to the instrumentation, subsequently permitting sample capacitance to be quantitatively extracted from the system response. Our technique represents a novel application of SCM instrumentation and has important applications in the analysis of on-chip passive components for future technology generations. Initial experimental results are promising, suggesting the extension of the technique to advanced technology nodes. 篇名：APPLICATION OF THE MODEL FOR SCM OF ARAGO TO SUPPLY CHAINS OF AN INDUSTRIAL GAS MANUFACTURER作者：MARCO AURELIO DILASCIO GUIMARAES授予单位：PONTIFCIA UNIVERSIDADE CATLICA DO RIO DE JANEIRO摘要：The globalization of competition has forced the organizations to seek and to implement new forms to create competitive advantages. Nowadays, as competition occurs effectively between supply chains and not between isolated companies, SCM (Supply Chain Management) appears as a new frontier to be explored. Within this context, this dissertation has the objective to apply the model for SCM proposed in Arago et al. (2004) to analyze the supply chains based on key-dimensions for a successful SCM. The key- dimensions considered in this model are: business process integrations, identification of the supply chain key-member, sharing of information and measures of performance related to the supply chain of an industrial gas manufacturer in the Brazilian market. This manufacturer is considered in this dissertation as the focal company of the supply chain. Five key-members of this chain are also included in the analysis. As a result the analyses, it is possible to conclude that the focal company develops different ways to manage its chain depending on each of its key members.A globalizao da competio tem forado as organizaes a buscar e implementar novas vertentes geradoras de vantagens competitivas. Como na atualidade a competio ocorre freqentemente entre cadeias de suprimentos e no entre empresas isoladas, a Gesto da Cadeia de Suprimentos (Supply Chain Management - SCM) aparece como uma nova fronteira a ser explorada. Em funo dessas consideraes, esta dissertao tem por objetivo de aplicar o Modelo para SCM de Arago et al. (2004) para analisar cadeias de suprimentos baseadas em dimenses-chave necessrias para uma bem sucedida SCM. As dimenses-chave consideradas neste modelo so: integrao de processos de negcios, identificao dos membros-chave da cadeia, compartilhamento de informao e medidas de desempenho relacionadas cadeia de suprimento de uma empresa fabricante de gases industriais no mercado Brasileiro. Este fabricante considerado nesta dissertao como a empresa focal da cadeia de suprimentos. Cinco membros-chave desta cadeia so tambm incorporados na anlise. Conclui-se que a empresa focal possui diferentes formas de gerir a sua cadeia em funo de cada membro chave.5、 标准文献（找1篇）：（工科必备） 标准名称：户用计量仪表数据传输技术条件 发布单位：CN-CJ 标准编号：CJ/T 188-2004 摘要：无6.产品样本:只提供图,商品名:厂家.联系方式.（工科必备）图：商品名: C8051F330厂家:深圳市莱利尔科技有限公司联系方式: 联系电话：0755- 0755- 黄小姐： QQ：李先生： QQ： 企业网址：MSN:7.网络上相关网页(10页)(只列题名，IP地址.)(注意相关度)（必备）老古开发网/电子发烧友/电子原件技术网/电子产品世界/电子工程师之家/forum.php电子设计应用网/中国电子库存网/电子创新网/华强电子网/创e时代/8、会议论文（2篇）（必备）【会议录名称】 武汉(南方九省)电工理论学会第22届学术年会、河南省电工技术学会年会论文集【文章】C8051F020单片机的应用实践【作者】 孙求国； 聂一雄；【作者单位】 广东工业大学自动化学院电力工程系【会议名称】武汉(南方九省)电工理论学会第22届学术年会、河南省电工技术学会年会【会议地点】中国河南焦作【摘要】 本文基于C8051F020单片机,详细介绍了它集成的ADC和FLASH存储器的使用方法和注意事项,并给出了软件例程。同时为突显C8051F020强大的外设能力,结合当前使用C8051F系列芯片的特点,介绍了C8051F020单片机外接LED显示屏和USB接口的硬件连接方法。 【会议录名称】 第七届全国信息获取与处理学术会议论文集【文章】单片机应用系统无源外中断扩展技术研究【作者】 项剑； 张浩然；【作者单位】 浙江师范大学数理与信息工程学院；【会议名称】第七届全国信息获取与处理学术会议【会议地点】中国广西桂林【摘要】 本文根据二极管逻辑矩阵编码原理,利用单片机内部资源和n个I/O口,将外中断源扩展至2n-1个,在无源的单片机系统中有较好的实用价值。9.中外文电子图书（相关专业）各3种，说明来源，格式，书名，作者，标准书号，有无全文。（必备）*以下中文图书均来自高清PDF网，【中文名】:爱上单片机 第二版【作者】:杜洋【资源格式】:PDF【书号】: 29【有无全文】：有 【中文名】:PIC单片机入门与实战【作者】:张明峰【资源格式】:PDF【书号】: 【有无全文】有 【中文名】:单片机原理及接口技术【作者】:李全利【资源格式】:PDF【书号】: 【有无全文】:有*以下英文图书来自亚马逊书名：Motorola MC6801 8-Bit Single Chip Microcomputer Reference Manual作者：Austin, Texas Microprocessor Applications书号（ASIN）:B003CTJ7H8有无全文：无书名：Single-chip Microcomputer Data作者: bu motorola书号: ASIN:B000H1WH3K有无全文:无书名：Single-Chip Microcomputers作者：Paul Lister书号：ISBN-13:978-有无全文：无三、综述报告（含课题研究目的、技术背景、现状分析、市场分析，展望等，500-1000字左右.。（文科同学800-150