工具钳工职业技能鉴定所(考场)设置标准

Innovation, the key is to play the leading role of innovation in the innovation of science and technology. We have placed at the core of the overall development of science and technology innovation Location and develop technology, branding, quality as the core competitive advantages of regional innovation, better use of the multiplier effect on economic development. To strengthen scientific and technological cooperation. Around the forest and mineral resources of the deep processing, exploitation of technical innovation to promote transfer, transformation, application and popularization of scientific and technological achievements. We should improve the system of science and technology. Thoroughly implement the Central stream of deepening the reform of science and technology programme and the province issued regulations on scientific and technological progress, promoting the regions science and technology enterprises three years action plan, optimize the allocation of scientific resources, maximum release innovation potential of science and technology, and strive to better enterprise in seed industry and beyond, and more new Board listing. Sought to improve science and technology projects and administration. Strengthening science and technology innovation projects top design, and strive with national and provincial Thirteen-Five technology plans, actively seek national and provincial major science and technology projects, industrial projects and demonstration projects, supporting science and technology enterprises to increase scientific and technological investment in research and development and technology, research and Development Center, forming a number of technologies and products with independent intellectual property rights. (Specific to the XX, we will continue to do a good job in agricultural research and demonstration of County agriculture Park, rural agricultural demonstration base into full play the dual role of active counties to build cooperation with the provincial Agricultural University, introduction of advanced scientific research and experiments in promotion, promoting produce, learn, research development. Strengthening grass-roots agricultural technicians system construction and management to progressively increase the agricultural sensible quantities to build County XX County planting structure adjustment of agricultural technology-savvy experts. ), Third, we must strengthen human resources support. Talent is supporting the development of the first resource. Both the development of new industries, or corporate development requires talent as a lead. I was personnel structure characteristic of traditional forestry, professional and technical personnel more than 85% for culture, education, health and forestry personnel, pure business managers is less than 12%, with the capability of research and development professionals is not enough 1%, talent as a whole cultural structure of structure and low level of development工具钳工职业技能鉴定所（考场）设置标准一、编制说明为使职业技能鉴定所（考场）认定工作标准化、规范化、科学化，根据原劳动部颁发的职业技能鉴定规定（劳部发1993134号）、职业技能证书规定（劳部发199498号）、人力资源和社会保障部制定的工具钳工国家职业技能标准（2009年修订）等制定本标准。(以下配置情况按20人/批的鉴定能力设置)二、适用范围本标准适用于认定本职业（工种）初级（五级）、中级（四级）、高级（三级）、技师（二级）和高级技师（一级）级别的职业技能鉴定所（考场）。三、人员配置（一）所长负责鉴定所（考场）的全面管理工作。具有本专业中等技术职务或技师以上职业资格，大专以上文化程度，从事本专业工作8年以上，熟悉职业技能鉴定有关政策和培训考核工作。（二）副所长协助所长管理鉴定所（考场）的日常工作。具有本专业中等技术职务或高级以上职业资格，大专以上文化程度，从事本专业工作5年以上，熟悉职业技能鉴定有关政策和培训考核工作。（三）工作人员办公室人员：协助所长管理鉴定所（考场）的日常事务，承担职业技能鉴定考场的具体工作。具有大专以上文化程度，熟悉职业技能鉴定考核工作。考评人员：自有考评员不得少于3人。持有人力资源和社会保障部门颁发的考评人员资格证卡。考务人员：能熟练进行计算机操作，负责鉴定人员的报名、资格初审、考场安排、设备材料准备、辅助考评员和监考员工作、考务档案管理和办证等工作。具有高中以上文化程度，熟悉本职业技能鉴定工作。设备维修、材料管理人员：负责技能鉴定所的设备、仪器仪表维修及材料管理工作。具有高中以上文化程度，熟悉设备原理及使用，并持有相关专业职业资格证书。财务管理人员：按财务管理规定配备。负责鉴定收费和日常账务管理工作。必须持有财务人员资格证书。四、管理制度（一）财务管理制度（二）鉴定工作规程(报名、收费、鉴定、办证)（三）岗位职责（四）档案管理制度（五）各种设备安全操作规程（六）考评员、考务员工作守则、考场规则（七）安全、保卫制度（八）设备、设施管理制度（九）其它 五、鉴定资料（一）国家职业标准（二）考核大纲（三）鉴定规程（四）相关管理文件和资料 六、申报单位基本情况（简况、经费来源、固定资产、规模）七、场地（一）办公用房不少于30平方米，桌椅、文件档案柜、保险柜、电脑、打印机、复印机、电话等办公设备齐全。（二）理论鉴定场地：理论鉴定场地应选用标准教室，每间试室都应具备30个非阶梯考试座位。若出现较大的试室，考试座位最多不得超过60个。每个标准课室的面积不少于50平方米，教室内讲台、黑板等设施齐备，并有良好的照明和通风条件。智能化考试的理论试室内应配置至少30台考试用机和3台备用考试机。（三）实操鉴定场地：有满足操作技能鉴定需要的场地，符合环境保护、劳保安全和消防等各项要求。其中初级、中级、高级工技能实训和鉴定场地须同时满足20人/班考核需要，面积不少于250平方米/班；技师、高级技师操作技能实训和鉴定场地须同时满足10人/班考核需要，面积不少于250平方米/班。八、设备、检测仪器的基本配置要求评分规则：1.高级别的鉴定所须满足低级别鉴定的要求，即：认定高级工鉴定所时须进行初级工、中级工鉴定所的审核，其余类推。2.每个鉴定级别的标准为100分，各级别的基本达标总分为70分，表格中每个设备的基本达标分（最低标准）为该设备配分的60%。3.表内所列出的栏目中，注有“必配”和“选配”要求，如果“必配”的部分未达到最低标准，则该级别的配置要求未能达标。所有参加本项检修的正式工应为专业从事电机检修，且通过技能鉴定合格的人员。临时工应熟悉相应的设备系统工作环境，并且通过简单的技能培训合格，安规培训考试合格。Without leads, my transition would be struggling. To improve the talent mechanism. Recently, the Central Government issued a circular on opinions on deepening the reform of talent development system aimed at stimulating innovation to create the maximum of entrepreneurial activity. We to actual research developed implement views of implementation approach, further perfect prefectural last year introduced of 19 article talent policy, to through flexible introduced talent, and joint construction development center, and cooperation established focus laboratory, measures solution local talent short problem, implementation technology results pricing shares, and equity option incentive, and Division, award approach, guarantees talent to knowledge, and skills, and management, innovation elements participation interests distribution, in-depth implementation students introduced engineering and local students return engineering, Reverse the shortage situation as soon as possible. To further optimize the allocation of talent. Establishing and perfecting the talent flow system, improving horizontal and vertical mobility, promoting talent in the orderly flow of units with different properties and different areas, improve the wages, health benefits, job appraisal, pension policy, encouraging talent flows to the base first, production line, especially those business park, enterprise incubator . Policy, Tai Hing talent in the whole society, love, weight, using only wind, talent innovation create profit, honor, status, efforts to create a social media environment to encourage innovation, failure tolerated. Four to foster the market. Vibrant market, it is an important foundation for economic transformation and development. Inspire creativity is to enhance endogenous impetus for economic development. Padded short I industrial Panel, accelerating the pace of development, must be hard work on fostering market players. To activate the stock of State-owned enterprises. Through the transformation and upgrading of traditional industries, reshape the industry chain and the supply chain, more soft values. (XX, to highlight the industrial development plan, lead cultivation and created on board the enterprise, in the Thirteen-Five period, added on board the Enterprise 4, on the regulation of industrial enterprises reached 5. While breakthrough clean energy into industrial development, optimizing the structure of XX energy play XX water rich in resources, important clean-energy base in Northern XX build XXX). Growth of non-public economy. Active encourages, and support and guide non-public economic development, around General Secretary pointed out that of development encountered of market of iceberg, and financing of Alpine, and transformation of volcano this three seat big mountain, developed has breakthrough of with to, and tax, and financial, support policy, to really helped really help, support Lin Gebei, and constant friends, and beyond, non-public enterprise put products do fine, and put国家职业资格五级（初级）鉴定项目鉴定内容配置和评分设备名称型号、规格单位数量要求配分自评分得分备注考件毛坯加工鉴定所加工考件毛坯普通车床自定台1选配1每少一台扣1分平面磨床自定台1选配1每少一台扣1分线切割机床自定台2选配2每少一台扣1分普通铣床自定台2选配2每少一台扣1分零件加工孔加工、螺纹加工、平面加工、曲面加工等钻床（含平口钳）能完成16孔加工台6必配6每少一台扣1分砂轮机自定台2必配2每少一台扣1分台虎钳（装在钳台）125mm台25必配5每少一台扣0.5分万能分度头中心高100以上台4必配2每少一台扣0.5分划线工具(方箱、平板、角尺、V型铁、高度尺)自定套4必配2每少一套扣0.5分标准平板（0级、测量用）自定台10必配2每少一台扣0.2分装配夹具、模具等工艺装备的安装和装配普通冲床（具安全保护装置）自定台2必配6每少一台扣3分注塑机自定台2必配4每少一台扣2分敞开式冲孔或落料模部件自定套6选配3每少一套扣0.5分导柱式单工序冲孔或落料模部件自定套6选配6每少一套扣1分典型单工位钻床夹具部件自定套6选配3每少一套扣0.5分单分型面（二板式）的型腔模自定套6选配3每少一套扣0.5分维修夹具、模具等工艺装备的维修敞开式冲孔或落料模自定套6必配9每少一套扣1.5分导柱式单工序冲孔或落料模自定套6必配9每少一套扣1.5分典型单工位钻床夹具自定套6必配9每少一套扣1.5分检测量仪考生使用和评分千分尺、游标卡尺、万能角度尺、百分表、平板等测量尺寸、形位误差、角度误差的通用量具自定套10必配5每少一套扣0.5分正弦规、量块、水平仪、方箱、角尺、V型铁自定套5必配5每少一套扣1分其它设施、设备保证技能鉴定顺利实施的设施、设备和物资零件加工备用工量具:各类锉刀、刮刀、钻头、铰刀、锯弓、板手、内外径千分尺、游标卡尺、万能角度尺、研具等工具、夹具、刀具、量具自定套20选配4每少一套扣0.5分装配和维修工具：如各类扳手、各类旋具、各类夹具、各类风动电动工具、钳子、弹簧卡圈钳、手锤、铜棒、工作灯等自定套8必配5每少一套扣1分起重设备和操作人员自定台1选配2每少一台扣2分清洗液、油类、润滑脂、棉纱等自定适量必配2视配置扣分合计国家职业资格四级（中级）鉴定项目鉴定内容配置和评分设备名称型号、规格单位数量要求配分自评分得分备注考件毛坯加工鉴定所加工考件毛坯普通车床自定台1选配1每少一台扣1分平面磨床自定台1选配1每少一台扣1分线切割机床自定台2选配2每少一台扣1分普通铣床自定台2选配2每少一台扣1分零件加工孔加工、螺纹加工、平面加工、曲面加工等钻床（含平口钳）能完成16孔加工台6必配6每少一台扣1分砂轮机自定台2必配2每少一台扣0.5分台虎钳（装在钳台）125mm台25必配5每少一台扣0.5分万能分度头中心高100以上台4必配2每少一台扣0.5分划线工具(方箱、平板、角尺、V型铁、高度尺)自定套4必配2每少一套扣0.5分标准平板（0级、测量用）自定台10必配2每少一台扣0.2分装配夹具、模具等工艺装备的安装和装配普通冲床（具安全保护装置）自定台2必配6每少一台扣3分注塑机自定台2必配6每少一台扣3分两工序的导柱式复合模部件自定套6选配二选一3每少一套扣0.5分拉深模或三工位级进模部件自定套6典型单工位铣床夹具部件自定套6选配3每少一套扣0.5分二板式注射模部件自定套6选配3每少一套扣0.5分维修夹具、模具等工艺装备的维修两道工序的导柱式复合模自定套6必配二选一9每少一套扣1.5分拉深模或三工位级进模自定套6二板式注射模自定套6必配9每少一套扣1.5分典型单工位铣床夹具自定套6必配9每少一套扣1.5分检测量仪考生使用和评分千分尺、游标卡尺、万能角度尺、百分表、平板等测量尺寸、形位误差、角度误差的通用量具自定套10必配8每少一套扣1分正弦规、量块、水平仪、方箱、角尺、V型铁自定套5必配5每少一套扣1分其它设施、设备保证技能鉴定顺利实施的设施、设备和物资零件加工备用工量具:各类锉刀、刮刀、钻头、铰刀、锯弓、板手、内外径千分尺、游标卡尺、万能角度尺、研具等工具、夹具、刀具、量具自定套20选配5每少一套扣0.5分装配和维修工具：如各类扳手、各类旋具、各类夹具、各类风动电动工具、钳子、弹簧卡圈钳、手锤、铜棒、工作灯等自定套8必配5每少一套扣1分起重设备和操作人员自定台1必配3每少一台扣3分清洗液、油类、润滑脂、棉纱等自定适量必配1视配置扣分合计国家职业资格三级（高级）鉴定项目鉴定内容配置和评分设备名称型号、规格单位数量要求配分自评分得分备注考件毛坯加工鉴定所加工考件毛坯普通车床自定台1选配1每少一台扣1分平面磨床自定台1选配1每少一台扣1分线切割机床自定台2选配2每少一台扣1分普通铣床自定台2选配2每少一台扣1分零件加工孔加工、螺纹加工、平面加工、曲面加工等钻床（含平口钳）能完成16孔加工台6必配6每少一台扣1分砂轮机自定台2必配2每少一台扣1分台虎钳（装在钳台）125mm台25必配5每少一台扣0.5分万能分度头中心高100以上台4必配3每少一台扣1分划线工具(方箱、平板、角尺、V型铁、高度尺)自定套4必配3每少一套扣1分标准平板（0级、测量用）自定台10必配3每少一台扣0.3分装配夹具、模具等工艺装备的安装和装配普通冲床（具安全保护装置）自定台2必配6每少一台扣3分注塑机自定台2必配6每少一台扣3分三工序以上的复合模部件自定套6选配二选一3每少一套扣0.5分四工位以上的级进模部件自定套6三板式注射模部件自定套6选配二选一3每少一套扣0.5分带侧向抽芯机构的两板模部件自定套6铣床或钻床分度式夹具部件自定套6选配3每少一套扣0.5分维修夹具、模具等工艺装备的维修三工序以上的复合模自定套6必配二选一9每少一套扣1.5分四工位以上的级进模自定套6三板式注射模自定套6必配二选一9每少一套扣1.5分带侧向抽芯机构的两板模自定套6铣床或钻床分度式夹具自定套6必配9每少一套扣1.5分检测量仪考生使用和评分千分尺、游标卡尺、万能角度尺、百分表、平板等测量尺寸、形位误差、角度误差的通用量具自定套10必配8每少一套扣1分正弦规、量块、水平仪、方箱、角尺、V型铁自定套5必配5每少一套扣1分其它设施、设备保证技能鉴定顺利实施的设施、设备和物资零件加工备用工量具:各类锉刀、刮刀、钻头、铰刀、锯弓、板手、内外径千分尺、游标卡尺、万能角度尺、研具等工具、夹具、刀具、量具自定套20选配3每少一套扣0.3分装配和维修工具：如各类扳手、各类旋具、各类夹具、各类风动电动工具、钳子、弹簧卡圈钳、手锤、铜棒、工作灯等自定套8必配4每少一套扣1分起重设备和操作人员自定台1必配3每少一台扣3分清洗液、油类、润滑脂等自定适量必配1视配置扣分合计国家职业资格二级（技师）鉴定项目鉴定内容配置和评分设备名称型号、规格单位数量要求配分自评分得分备注考件毛坯加工鉴定所加工考件毛坯普通车床自定台1选配1每少一台扣1分平面磨床自定台1选配1每少一台扣1分普通铣床自定台2选配2每少一台扣1分零件加工孔加工、螺纹加工、平面加工、曲面加工等钻床（含平口钳）能完成16孔加工台6必配6每少一台扣1分砂轮机自定台2必配2每少一台扣1分台虎钳（装在钳台）125mm台25必配5每少一台扣0.5分万能分度头中心高100以上台4必配3每少一台扣1分划线工具(方箱、平板、角尺、V型铁、高度尺)自定套4必配3每少一套扣1分标准平板（0级、测量用）自定台10必配3每少一台扣0.3分数控铣床（配电脑）自定台8必配16每少一台扣2分装配夹具、模具等工艺装备的安装和装配普通冲床（具安全保护装置）自定台2必配4每少一台扣2分注塑机自定台2必配4每少一台扣2分复杂精密可调夹具自定套4选配二选一4每少一套扣1分复杂精密分度夹具自定套4带气动抽芯的复杂型腔模部件自定套4选配二选一4每少一套扣1分带液压抽芯的复杂型腔模部件自定套4五工位以上级进模自定套4选配二选一4每少一套扣1分复杂的复合模或精冲模或异形拉伸模部件维修夹具、模具等工艺装备的维修复杂精密可调夹具自定套4必配二选一4每少一套扣1分复杂精密分度夹具自定套4带气动抽芯的复杂型腔模自定套4必配二选一4每少一套扣1分带液压抽芯的复杂型腔模自定套4五工位以上级进模自定套4必配二选一4每少一套扣1分复杂的复合模或精冲模或异形拉伸模检测量仪考生使用和评分千分尺、游标卡尺、万能角度尺、百分表、平板等测量尺寸、形位误差、角度误差的通用量