《设备的安全防护》PPT课件

1、.,1,Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有旋转或移动的部件上安装护罩,Proper guarding on moving component. 在旋转部件上设置的正确护罩,-Chains链条 -Collars轴 -Couplings接合器 -Blades刀具 -Pulleys滑轮 -Shafts传动杆 -Other Rotating or Moving Parts其它移动或旋转设备,HAZARD ASSESSMENT - Machine Gu

2、arding 01,.,2,Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有旋转或移动的部件上安装护罩,Proper guarding on rotating component. 在旋转部件上设置的正确护罩,No guarding on chain drive. 在链条上没有护罩,HAZARD ASSESSMENT - Machine Guarding 02,.,3,Proper guarding on rotating component. 在旋转部件

3、上设置的正确护罩,No guarding on pulley. 在滑轮上没有护罩,HAZARD ASSESSMENT - Machine Guarding 03,Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有旋转或移动的部件上安装护罩,.,4,Proper Guarding 正确的护罩,No guarding on coupling. 接合器上没有护罩,HAZARD ASSESSMENT - Machine Guarding 04,Full enclos

4、ure or adjustable guarding must be provided around all rotating or moving parts.在所有旋转或移动的部件上安装护罩,.,5,Guarding must extend around the back side of rotating or moving parts.旋转或移动的部件反面也要有护罩保护,Proper Guarding 正确的护罩,No guarding on the back side of the pulley. 滑轮的反面的没有护罩保护,HAZARD ASSESSMENT - Machine Guar

5、ding 05,.,6,Proper guarding around back side of moving components. 正确的护罩-保护到运动部件的后面,No guarding on the back side of the drive. 运动部件的后侧没有护罩,HAZARD ASSESSMENT - Machine Guarding 06,Guarding must extend around the back side of rotating or moving parts.旋转或移动的部件反面也要有护罩保护,.,7,Deflection guards must be pro

6、vided on machinery with the potential to project chips, particles, sparks or kickbacks.对于那些在运转时有可能产生碎片，颗粒物，火花或其它后果的机器，必须设置防护罩,Proper Guarding Grinder 正确的护罩-砂轮机,Proper Guarding Machine 正确的护罩机器,HAZARD ASSESSMENT - Machine Guarding 07,.,8,Machine guards must be maintained in a clean and proper working

7、condition.机器的护罩必须维护在整洁和正常工作的状态,Proper Guarding 正确的护罩,HAZARD ASSESSMENT - Machine Guarding 08,.,9,Machine guards must not be modified to defeat the total protection of the guard.不能随意对机器护罩加以改造，以致影响到护罩的整体防护功能,Improperly modified guard. 不正确改造的护罩,Too Large 开口太大,HAZARD ASSESSMENT - Machine Guarding 09,.,1

8、0,Machine guards must be properly adjusted for the machine.机器护罩必须被正确调节,Improperly adjusted guard. 不正确调节的护罩,HAZARD ASSESSMENT - Machine Guarding 10,.,11,Fixed machine guards must be properly secured in place.固定式机器护罩必须正确地安装在机器上,Guard not properly in place. 护罩没有正确地安装在位置上,Guard missing from side of mach

9、ine. 护罩的一侧被拿走,Missing,HAZARD ASSESSMENT - Machine Guarding 11,.,12,Power presses must have appropriate control devices to prevent the operator from placing their hands into the machine during operation.冲压设备必须有适合的控制设施来防止操作者在操作时将手放在机器内,Light Curtain 光帘,Control Devices: -Two-Handed Tripping Devices -Li

10、ght Curtains -Restraints -Barriers 控制设施: -两只手操作的装置 -光帘 -抑制 -屏障,HAZARD ASSESSMENT - Machine Guarding 12,.,13,Two-handed tripping device. 两只手控制的装置,HAZARD ASSESSMENT - Machine Guarding 13,Power presses must have appropriate control devices to prevent the operator from placing their hands into the machi

11、ne during operation.冲压设备必须有适合的控制设施来防止操作者在操作时将手放在机器内,.,14,No guard preventing entry into sides of the press. 没有防护设备妨止从侧面进入冲压设备,Plexiglass barrier guard around all sides of the press. 有机玻璃屏障置于冲压设备周围,HAZARD ASSESSMENT - Machine Guarding 14,Power presses must have appropriate control devices to prevent

12、the operator from placing their hands into the machine during operation.冲压设备必须有适合的控制设施来防止操作者在操作时将手放在机器内,.,15,Abrasive wheel grinders must have appropriately adjusted tool rests and tongue guards.砂轮机必须有正确的可调节的靠垫和舌形的护罩,Properly adjusted grinder guard. 正确调节的砂轮机护罩,HAZARD ASSESSMENT - Machine Guarding 15

13、,.,16,Tool rest improperly adjusted. 靠垫的间距调节不正确.,No tool rest, tongue guard or side guard. 没有靠山，舌形的护罩，侧面的护罩,HAZARD ASSESSMENT - Machine Guarding 16,Abrasive wheel grinders must have appropriately adjusted tool rests and tongue guards.砂轮机必须有正确的可调节的靠垫和舌形的护罩,.,17,Guards for machines with rotating or tu

14、rning blades must be properly adjusted to cover the exposed portion of the blade.有旋转刀片的机器的护罩必须被正确的调节，以盖住刀片的暴露部分,Open side to band saw blade. 锯条的护罩一侧被打开,Properly adjusted band saw guard to stock height. 正确调节的锯条护罩的高度,HAZARD ASSESSMENT - Machine Guarding 17,.,18,Guards must be provided over foot activa

15、ted control pedals to prevent inadvertent activation.对于可被脚打开的控制开关，必须安装护罩，以防止脚无意中开启设备,Covered foot pedal. 包住上面的脚踏开关,Covered foot pedal. 包住上面的脚踏开关,HAZARD ASSESSMENT - Machine Guarding 18,.,19,Permanent equipment must be properly secured in place.永久使用的设备必须在工作场所安全的放置,Drill press not secured in place. 钻床

16、放置在不安全的现场,Grinder not secured in place. 砂轮机放置在不安全的地点,HAZARD ASSESSMENT - Machine Guarding 19,.,20,Automatic machine guards must be properly functioning and not altered or modified.自动的机器护罩必须运转正常，不能被改变,Properly functioning light curtain. 正确运转的光帘,Modified light curtain with tape on bottom half. 被改变的光帘在

17、下半部有带子,HAZARD ASSESSMENT - Machine Guarding 20,.,21,Properly functioning interlock. 正确运转的互锁装置,Malfunctioning door interlock. 有故障的门的互锁,HAZARD ASSESSMENT - Machine Guarding 21,Automatic machine guards must be properly functioning and not altered or modified.自动的机器护罩必须运转正常，不能被改变,.,22,Emergency stop butt

18、ons must be properly labeled and color coded.应急停止按钮必须被正确的标识出，并且有色标,Emergency stop button. 应急停止按钮,Emergency stop button. 应急停止按钮,HAZARD ASSESSMENT - Machine Guarding 22,.,23,Emergency stop buttons must be properly positioned and functioning on machines.应急停止按钮必须在正确地安装在机器上，并且能正常运转,Emergency stop button. 应急停止按钮,Emergency stop button. 应急停止按钮,HAZARD ASSESSMENT - Machine Guarding 23,.,24,Emergency stop cords must be properly identified and functioning.应急停止绳索必须被正确地标识出，并且运转正常,Properly functioning emergency stop cord. 正常运转的应急停止绳索,Properly functioning emergenc