洛克林接头在空调安装中的运用.ppt

1、,Energielabel,INSTALLATION OF AN AIR CONDITIONER,Energielabel,DAIKIN 30 kw AIR CONDITIONER,AIR CONDITIONER FOR SERVER ROOM,Energielabel,JOB PLANNING,Energielabel,ROOF REALISATION,Energielabel,FLARE CONNECTION LR-EURO-16 M,When the LOKRING was brougth into a stress-free position connect the tube with

2、 the LR- Euro-XX. Use stabilisation inserts.,Energielabel,FINISHED OUTSIDE APPARATUS,Found the finished assembled tube, to avoid damages caused by mechanical stress.,Energielabel,PRE-ASSEMBLY OF THE INSIDE APPARATUS,Pre-assembly of the flare fitting and the 28,6 NWK Ms 50 for length adaption of the

3、following installation.,Energielabel,CONNECTION TO THE INSTALLATION,NOTE: Check if the tube which has to be connected is seated untill the middle fixing point.,Energielabel,CONNECTION TO THE INSTALLATION,Energielabel,FINISHED INSIDE APPARATUS,Take care of a stress-free position of the tubes.,Energie

4、label,INSTALLATION OF THE TUBES,Prepare parts of the installation, to ease the assembly in constricted places.,Energielabel,FINISHED INSTALLATION,It is useful to make the last connection in areas with long tubes to avoid, mechanical stresses like twisting or bending.,Energielabel,Y-TUBES FOR MULTISPLITTING DEVICES,Structure of an inverter: As you can see on the picture, several inside devices are conducted over one outsided unit. To connect the, in a series used evaporators, the y-tubes are needed.,Energielabel,Sche