机器人制作ppt 英文

1、How To Make a Robot1实用精品课件PPT2实用精品课件PPTelectric ironoscilloscope component3实用精品课件PPT4实用精品课件PPT5实用精品课件PPTThe Complete Kit Includes:EZ-B v3 Bluetooth Robot ControllerEZ-Builder Robot Control Software & SDKVision Tracking CameraHC-SR04 Ultrasonic Distance Sensor6 x Servos (4 standard, 2 Continuous)2 x

2、Peripheral Cables6 x AA Battery Holder & AdapterServo Attachments and WheelsSupports many Robot Platforms!Online Video TutorialsFree UpdatesToo many features to list!6实用精品课件PPTThe only thing this toy had was a circuit board to make noises like Wall-e. Everything else was manual for movements, includ

3、ing the arms, the neck and the tracks. No other electronics. 7实用精品课件PPTTook on Wall-e quite some time ago,it started with an Arduino but once i found the EZ-B there was no looking back Step 1:The Brain - An awesome EZ-B Module8实用精品课件PPT Took out the voice module, then striped(剥掉剥掉) it down to just t

4、he two power wires, and then hooked it to the EZ-B for power, to one of the 5v outputs.Step 2:Voice Module - Extraction9实用精品课件PPTAfter taking the toy apart and extracting the voice module you will see that you will have room to put the EZ-B module there. Step 3:Step 3: Installing the EZ-B module10实用

5、精品课件PPTStep 4: Vision Tracking Camera11实用精品课件PPTMake sure you write down which inputs are what, it makes it easier in the EZ-Builder to configure everything. 12实用精品课件PPT13实用精品课件PPTStep 6: The SensorsI/R distance sensor on the front of Wall-es neck too for extra detection, you may want to program his head to swing(摇摆摇摆 ) back and forth to detect objects better when he is traveling around. All programmable within the EZ-Builder software ! 14实用精品课件PPT15实用精品课件PPTWall-e is complete besides a few enhancements that will give him. 1