补偿贸易合同-荐

1、补偿贸易合同中文文本本合同于 _年_月_日中国 _市签订。甲方：中国 _公司法定地址：电话：电传：乙方： _国_公司法定地址：电话：电传：双方在平等互利基础上，通过友好协商，特订立本合同。第一条贸易内容（一）乙方向甲方提供用于生产的_型机械 _一各种其他辅助机械设备，并同事提供各类机械设备所必须的附配件及备用件，以及在生产过程中各种必须的测试一起。具体的各类机械设备、测试仪器、附配件、备用件之型号、名称、规格、数量、价格、包装要求、交货期限等，由双方另行签订设备进口公司，作为本合同不可分割的一部分。（二）甲方用乙方提供的机械设备所生产的部分产品以及其他商品，经双方协商后，也可用_工厂生产的 _

2、 来偿付全部机械设备的价款。具体的偿付商品之名称、数量、价格、交货期限等，由双第 1页 / 总共 128页方领行签订补偿商品供货合同，作为本合同不可分割的一部分，设备进口合同与补偿商品供货合同可合并为补偿贸易购销合同，见附件。第二条支付条件由甲乙双方对开信用证，即由甲方分期开出以乙方为受益人的远期信用证，分期、分批支付全部机构设备的价款；乙方开出以甲方为受益人的即期信用证，支付补偿商品的货款。甲方用乙方支付补偿商品的货款，来支付全部机械设备的价款。当乙方支付的货款不能相抵甲方所开的远期信用证之金额时，其差额部分由乙方用预付货款方式，在甲方所开的远期信用证到期前汇付甲方，以使甲方能按时议付行所开

3、的远期信用证。甲方所开的远期信用证的按期付款，是基于乙方按规定开出即期信用证几按规定预付货款。乙方保证按规定开出信用证及预付。第三条付款期限甲方用 _ 年零 _个月，分月用商品偿付全部机械设备的价款。偿还日期自第一批机械设备到货后约_个月后开始，原则上每月偿还日期自第一批机械设备到货后约_个月后开始，原则上每月偿还的金额是全部机械设备价款的_分之 _。甲方可以提前偿还，但需在_个月前通知乙方。在甲方用补偿商品偿还机械设备借款期间，乙方应按本协议项下的有关补偿商品合同的规定， 开出以甲方为受益人的足额、 即期、不可撤消，可分割、可转让的信用证。第四条货币双方商品觉用 _币计价。乙方提供的全部机械

4、设备及所有仪第 2页 / 总共 128页器、附配件用 _币作价，甲方提供的补偿商品则按签订合同时甲方出口货物的人民币作价，以当时的人民币对_币的汇率折算为_币。第五条利息计算甲方所开的远期信用证及乙方所预付货款的利息应由甲方负担。双方议定年利息率为百分之 _。第六条技术服务货物到达甲方口岸后， 由甲方自行安装。 但在主要设备安装过程中，甲方认为需要时，乙方必须派出技术人员进行现场知道，提供必要的技术服务，在此过程中由于技术上的问题，所造成的损失由乙方负责。经双方协商，为完成此项工作，由乙方派出_数量的技术人员。在中国的一切费用均由乙方承担。第七条附加设备在执行本协议过程中，如发现本合同项下的机

5、械设备在配套生产时需要继续增添新的机械设备或测试仪器时，可由双方另行协商， 予以增订。增订的项目仍应列入本合同范围之内。第八条保险设备进口后由乙方投保。设备所有权在付清货款发生转移后，如发生意外损失先由保险公司向投保人赔付，再按比例退回甲方已支付的设备货款。第九条违约责任乙方不按合同规定购买补偿商品或甲方不按合同规定提供商品时，第 3页 / 总共 128页均应按合同条款承担违约责任，赔偿由此造成的经济损失，并向对方支付该项总值的 _%的罚款。第十条履约保证为保证合同条款的有效履行，双方分别想对方提供由各自一房银行出具的保函，予以担保。甲方的担保银行为中国银行_分行，乙方的担保银行业 _国_银行

6、。第十一条合同条款的变更本合同内容如遇特殊情况需要变更，须经双方协商一致。第十二条不可抗力合同一方对由下列原因而导致不能或暂时不能履行全部或部分合同义务的，不承担责任：水灾、火灾、地震、干旱、战争或其他任何在签约时双方不能预料、无法控制且不能避免和克服的时间。但该放应尽快地将所发生的时间通知对方，并应在时间发生15 天内将有关机构出具的不可抗力时间的证明寄交对方。如果不可抗力时间之影响超过0 天，双方应协商 合同继续履行或终止履行的事宜。第十三条仲裁因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁，仲裁

7、裁决是终局的，对双方都有约束力。仲裁费应由败诉一放承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。第十四条文字、生效第 4页 / 总共 128页本合同用中文和英文写成，两种文字具有同等效力。上述两种文字如有不符，以中文为准。本合同自签字之日起生效，有效期为_年。期满后，双方如愿意继续合作， 经向中国政府有关部门申请，获得批准后，可延期 _年或重新签订合同。甲方：中国 _公司代表（签字）乙方：_国 _公司代表（签字）见证人：中国 _律师事务所律师（签字）英文文本compensation trade contractthis contract is hereb

8、y made and entered into between_co.(hereinafter referred to as pattya)and_co.(hereinafter referred to as pratyb)this_day of_,_,in_,china, adheringon the principleof equalityand mutual benefitand throughamicableconsultation.第 5页 / 总共 128页party a: _company, china.address: _tel: _telex: _party b: _ com

9、pany, _address: _tel: _telex: _article 1 introductionparty b shall provide party a with _machines of model _to be used in production.along with them shall also be provided various kinds of supporting machinery,accessories andspare parts it needs,and the various kinds of measuring and testing instrum

10、ents required in the course of production,the specificmodels, names,specifications, quantity,unit prices,packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties,which will serve as a integral part of the contract.the total c

11、ost of the entire machinery and its supportingequipment shallbe paid to partyb of the part of the productsand/orother commodities produced by party a with the machinery suppliedby partyb.itmay also be paid to partyb of (a certainproduct)turned第 6页 / 总共 128页ort by .(this practice is hereinafter refer

12、red to as a make-uppayment).thespecificnames,quantityand unitpriceoftheproductstobe deliveredas make-up payment,andthe deadlinefordelinery,areto be specified in an additional contract between the two partieson products-supplying as make - up payment,which shall be theintegral part of the contract.th

13、e two additional contractsmentioned above may be merged as one calledbuy -and sellcontracton compensation trade.article 2 terma of paymentthe two parties shall open a l/c in favour of eachother.i.e.partya shallopen,atregular intervals,long-terml/c infavour of party b to pay in install ments the enti

14、re cost of themachinery and its supportsightl/c infavourof artya as a paymentforthecostofthe productstobe deliveredby partya.partya shallpay forthetotalcostofthemachineryand itssupporting equipmentwith the sum of money which party b shall pay the products to bedelivered by party a as a make - up pay

15、ment.in case the money tobe paid by pairy b is not enough to cover the value of the long -term l/c is determined by the at - siggt l/c opened by party b andits down payment as stipulated in the contract .party b graranteesto fulfil what is required of it to do as mentioned herein.article 3deadline f

16、or payment第 7页 / 总共 128页party a shall pay the total cost of the machinery and itssupportingequipmentsuppliedby partyb by deliveringthe productsit produces topartyb as a make - rppayment on a month -to -monthbasis , and pay is off within a preriod of _ years and_months.the payment shall start approxi

17、mately _months after the first delivery of the machinery is made .inprinciple,the sum to be paid per month shall be _ percentof the total amount due to be paid for the machinery party a canmake its payment ahead of schedule with a notice given to party b_ months in advance.during the compensation pe

18、riod ,partyb shall open al/c infavour ofpartyb,covering the totalamount ,at sight , irrevocable , divisible and assignable ,in accordancewith the relevant provisions in the buy - and - sell contract oncompensation trade.article 4 currency for pricingproducts provided by either party shall be priced

19、in termsof_.all the items supplied by party b,includingmachinery,therequiredapparatus,accessoriesand spare partsshallbe priced directly in terms of _ above mentioned ;while theproductsprovidedby party a as a make -up payment forthemachinerysupplied by party b shall be first priced in terms of rmb as

20、 orhersimilar exportsatthetime thecontractismade and thentheprices第 8页 / 总共 128页in rmb shall be turned into those in _ above mentionedaccording to the current exchange rate at the time.article 5 interest ratepartya shallpay the intereston its long - term l/cand thedown payment of party b.the annual

21、interest rate is agreed upon at_%.article 6 technical serviceafterarrivalat the destinationport,themachinery shallbeassembled by party a.when party a believes it is necessary ,partyb shall send its technicians to provide on-the-spot instructionsand other required technical assistance during the cour

22、se ofassembling. party b shall be liable for the losses incurred in thecoures fo assembling as a result of technical default of its prat.after approval by both parties, party b shall send a groupof techniciansto china to faciliatethe completionof the project.the cost incurred in china shall be borne

23、 by party b.article 7 additional equipmentin the course of implementing the contract if it is founnecessary that,inadditionto the machinery and accessoriesalreadylisted in the provisions, some additional items of the equipmentand measuring and testingapparatusare needed, an additionalordershallbe ag

24、reed upon throughnegotiation.theitems thus added shall第 9页 / 总共 128页be incorporated in the contract.article 8 insuranceafter being delivered in china, the machinery and itssupporting equipment shall be insured by party b. the unforeseenlosses in connection with the equipment shall be indemnified for

25、by the insurancecompany firstto the insurer(partyb) in case theequepment has already been paid off for and thus transferred intoparty as possession.then a proportional part of the sum paid bythe insurance company shall be allotted to party a to cover thepayment partya has alreadymade forthe items of

26、 equipment involvedthe losses.article 9 liability for breacheither party shall be liable for a breach of contract inaccordance with theprovisionsin the contractand shall indemnifyfor all the losses thus if party b should fail to make purchase ofthe products to be delivered by party a as make - up pa

27、yment , orparty a should fail to deliver the products for compensation . insuch case, the breaching party shall pay to the other a sum as afine , which shall account for _ % of the total cost theproducts in question.article 10 performance guaranteeto guarantee the implementation of the contract, eac

28、h party第10页 / 总共 128页shall submit to the other a performance guarantee issued by a bankagreed by both parties. the guarantee bank of party a is bank ofchina, while that of party b is _ bank.article 11 amendment of the contractwhen the contract needs to be amended in certain particularcases, the amen

29、dment can be effected only after it is agreed uponby both parties through consultation.article force majeureeitherpartyshallnot be held resposibleforfailureor delayto perform all or any part of the contract due to flood, fireearthquake , drought , war or any other events which coule not bepredicted

30、at the time of the conclusion of the contract, and couldnot becontrolled, avoidedor overcome by the parties. however,thepartyeffectedby the event of forcemajeure shallinformthe otherpartyof itsoccurrencein writtenas soon as possibleand thereaftersend a certificate of the event issued by the relevant

31、 authorityto the other party but no later than 15days after its occurrence.in the event of force majeure last over 0 days, both partiesshallnegotiatethe performanceor the terminationof the contract.article 13 arbitrationall disputes arising from the performance of this contractshould be settled thro

32、ugh friendly negotiations. should no第11页 / 总共 128页settlement be reached through engotiation, the case shall then besubmitted for arbitration to the china international economic andtrade arbitration commission(beijing) and the rules of thiscommission shall be applied. the arbitration fee shall be bor

33、ne bythe losing party unless otherwise awarded by the arbitrationorganization.in the event of force majeure last over 0 days, both partiesshallnegotiatethe performanceor the terminationof the contract.article 13 arbitrationall disputes arising from the performance of this contractshould be settled t

34、hrough friendly negotiations. should nosettlement be reached throuhg engotiation, the case shall then besubmitted for arbitration to the china international economic andtrade arbitration commission(beijing)and the rules of thiscommission shall be applied. the arbitration fee shall be borne bythe los

35、ing party unless otherwise awarded by the arbitrationorganization.during the course of the arbitration, the contract shall beperformed except for the part under arbitration.article 14 language and effective datethe contractshallbe writtenin chinese and in english.bothlanguages are equally authentic.

36、 in the events of any discrepancy第12页 / 总共 128页between the two abovementioned versions,the chinese version shallprevail.the contract shall become effective when the contract issigned by both parties. the effective period of the contract shallbe years. based on the willingness to continue the contrac

37、t, bothpartiesshallsubmit a applicationto relavantdepartment of chinesegovernment forthe extensionof the contractor reach a new contractwhen the contract expires.partya : (signature)on behalf of (company)partyb: (signature)on behalf of (company)witnessed by (signature)?相关推荐：协议未约定经济补偿与协议的效力合同解除和终止时的经

38、济补偿金问题转让技术秘密和补偿贸易合同转让技术秘密和补偿贸易合作生产合同（三）房屋装修补偿合同范本涉外补偿贸易的合同范本2017 年房屋拆迁安置补偿合同房屋拆迁安置补偿合同样本征地补偿安置协议书房地产合同：拆迁补偿抵押协议2017-18中文文本本合同于 _年_月_日中国 _市签订。甲方：中国 _公司第13页 / 总共 128页法定地址：电话：电传：乙方： _国_公司法定地址：电话：电传：双方在平等互利基础上，通过友好协商，特订立本合同。第一条贸易内容（一）乙方向甲方提供用于生产的_型机械 _一各种其他辅助机械设备，并同事提供各类机械设备所必须的附配件及备用件，以及在生产过程中各种必须的测试一起

39、。具体的各类机械设备、测试仪器、附配件、备用件之型号、名称、规格、数量、价格、包装要求、交货期限等，由双方另行签订设备进口公司，作为本合同不可分割的一部分。（二）甲方用乙方提供的机械设备所生产的部分产品以及其他商品，经双方协商后，也可用_工厂生产的 _ 来偿付全部机械设备的价款。具体的偿付商品之名称、数量、价格、交货期限等，由双方领行签订补偿商品供货合同，作为本合同不可分割的一部分，设备进口合同与补偿商品供货合同可合并为补偿贸易购销合同，见附件。第二条支付条件由甲乙双方对开信用证，即由甲方分期开出以乙方为受益人的远期信用证，分期、分批支付全部机构设备的价款；乙方开出以甲方为受益人第14页 /

40、总共 128页的即期信用证，支付补偿商品的货款。甲方用乙方支付补偿商品的货款，来支付全部机械设备的价款。当乙方支付的货款不能相抵甲方所开的远期信用证之金额时，其差额部分由乙方用预付货款方式，在甲方所开的远期信用证到期前汇付甲方，以使甲方能按时议付行所开的远期信用证。甲方所开的远期信用证的按期付款，是基于乙方按规定开出即期信用证几按规定预付货款。乙方保证按规定开出信用证及预付。第三条付款期限甲方用 _ 年零 _个月，分月用商品偿付全部机械设备的价款。偿还日期自第一批机械设备到货后约_个月后开始，原则上每月偿还日期自第一批机械设备到货后约_个月后开始，原则上每月偿还的金额是全部机械设备价款的_分之

41、 _。甲方可以提前偿还，但需在_个月前通知乙方。在甲方用补偿商品偿还机械设备借款期间，乙方应按本协议项下的有关补偿商品合同的规定， 开出以甲方为受益人的足额、 即期、不可撤消，可分割、可转让的信用证。第四条货币双方商品觉用 _币计价。乙方提供的全部机械设备及所有仪器、附配件用 _币作价，甲方提供的补偿商品则按签订合同时甲方出口货物的人民币作价，以当时的人民币对_币的汇率折算为_币。第五条利息计算甲方所开的远期信用证及乙方所预付货款的利息应由甲方负担。双第15页 / 总共 128页方议定年利息率为百分之_。第六条技术服务货物到达甲方口岸后， 由甲方自行安装。 但在主要设备安装过程中，甲方认为需要

42、时，乙方必须派出技术人员进行现场知道，提供必要的技术服务，在此过程中由于技术上的问题，所造成的损失由乙方负责。经双方协商，为完成此项工作，由乙方派出_数量的技术人员。在中国的一切费用均由乙方承担。第七条附加设备在执行本协议过程中，如发现本合同项下的机械设备在配套生产时需要继续增添新的机械设备或测试仪器时，可由双方另行协商， 予以增订。增订的项目仍应列入本合同范围之内。第八条保险设备进口后由乙方投保。设备所有权在付清货款发生转移后，如发生意外损失先由保险公司向投保人赔付，再按比例退回甲方已支付的设备货款。第九条违约责任乙方不按合同规定购买补偿商品或甲方不按合同规定提供商品时，均应按合同条款承担违

43、约责任，赔偿由此造成的经济损失，并向对方支付该项总值的 _%的罚款。第十条履约保证为保证合同条款的有效履行，双方分别想对方提供由各自一房银行出具的保函，予以担保。甲方的担保银行为中国银行_分行，乙方第16页 / 总共 128页的担保银行业 _国_银行。第十一条合同条款的变更本合同内容如遇特殊情况需要变更，须经双方协商一致。第十二条不可抗力合同一方对由下列原因而导致不能或暂时不能履行全部或部分合同义务的，不承担责任：水灾、火灾、地震、干旱、战争或其他任何在签约时双方不能预料、无法控制且不能避免和克服的时间。但该放应尽快地将所发生的时间通知对方，并应在时间发生15 天内将有关机构出具的不可抗力时间

44、的证明寄交对方。如果不可抗力时间之影响超过0 天，双方应协商 合同继续履行或终止履行的事宜。第十三条仲裁因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁，仲裁裁决是终局的，对双方都有约束力。仲裁费应由败诉一放承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。第十四条文字、生效本合同用中文和英文写成，两种文字具有同等效力。上述两种文字如有不符，以中文为准。本合同自签字之日起生效，有效期为_年。期满后，双方如愿意继续合作， 经向中国政府有关部门申请，获得批准后，可延期 _

45、年或重新签订合同。第17页 / 总共 128页甲方：中国 _公司代表（签字）乙方：_国 _公司代表（签字）见证人：中国 _律师事务所律师（签字）英文文本compensation trade contractthis contract is hereby made and entered into between_co.(hereinafter referred to as pattya)and_co.(hereinafter referred to as pratyb)this_day of_,_,in_,china, adheringon the principleof equalityan

46、d mutual benefitand throughamicableconsultation.party a: _company, china.address: _tel: _telex: _party b: _ company, _第18页 / 总共 128页address: _tel: _telex: _article 1 introductionparty b shall provide party a with _machines of model _to be used in production.along with them shall also be provided var

47、ious kinds of supporting machinery,accessories andspare parts it needs,and the various kinds of measuring and testinginstruments required in the course of production,the specificmodels, names,specifications, quantity,unit prices,packingrequirements and the deadline for delivery shall be specified in

48、an additional contract to be made between the both parties,whichwill serve as a integral part of the contract.b) the total cost of the entire machinery and its supportingequipment shall be paid to partyb of the partof theproducts and/orother commodities produced by party a with the machinery supplie

49、dby party b.itmay alsobe paid topartyb of (a certainproduct)turnedort by .(this practice is hereinafter referred to as a make-uppayment).thespecificnames,quantityand unitpriceofthe productsto be deliveredas make-up payment,andthe deadlinefordelinery,areto be specified in an additional contract betwe

50、en the two partieson products-supplying as make - up payment,which shall be the第19页 / 总共 128页integral part of the contract.the two additional contractsmentioned above may be merged as one calledbuy - and sellcontracton compensation trade.article 2 terma of paymentthe two parties shall open a l/c in

51、favour of eachother.i.e.partya shallopen,at regularintervals,long-terml/c infavour of party b to pay in install ments the entire cost of themachinery and itssupportsightl/cin favourof artya as a paymentforthecostof the productstobe deliveredby partya.partya shallpay forthetotalcost ofthemachineryand

52、 its supportingequipmentwith the sum of money which party b shall pay the products to bedelivered by party a as a make - up payment.in case the money tobe paid by pairy b is not enough to cover the value of the long -term l/c is determined by the at - siggt l/c opened by party b andits down payment

53、as stipulated in the contract .party b graranteesto fulfil what is required of it to do as mentioned herein.article 3deadline for paymentparty a shall pay the total cost of the machinery and itssupportingequipmentsuppliedby partyb by deliveringtheproductsitproducesto partyb as a make -rp payment on

54、a month -to - monthbasis , and pay is off within a preriod of _ years and_months.the payment shall start approximately _第20页 / 总共 128页months after the first delivery of the machinery is made .inprinciple,the sum to be paid per month shall be _ percentof the total amount due to be paid for the machin

55、ery party a canmake its payment ahead of schedule with a notice given to party b_ months in advance.during the compensation period ,partyb shall open al/c infavourof partyb,coveringthe totalamount ,at sight , irrevocable , divisible and assignable ,in accordancewith the relevant provisions in the bu

56、y - and - sell contract oncompensation trade.article 4 currency for pricingproducts provided by either party shall be priced in termsof_.all the items supplied by party b,includingmachinery ,therequiredapparatus,accessoriesand spare partsshallbe priced directly in terms of _ above mentioned ;while t

57、heproductsprovidedby partya as a make - up payment forthe machinerysupplied by party b shall be first priced in terms of rmb as orhersimilarexportsat the time the contractis made and then the pricesin rmb shall be turned into those in _ above mentionedaccording to the current exchange rate at the ti

58、me.article 5 interest ratepartya shallpay the intereston its long - term l/cand thedown payment of party b.the annual interest rate is agreed upon at第21页 / 总共 128页_%.article 6 technical serviceafterarrivalat the destinationport,themachinery shallbeassembled by party a.when party a believes it is nec

59、essary ,partyb shall send its technicians to provide on-the-spot instructionsand other required technical assistance during the course ofassembling. party b shall be liable for the losses incurred in thecoures fo assembling as a result of technical default of its prat.after approval by both parties,

60、 party b shall send a groupof techniciansto china to faciliatethe completionof the project.the cost incurred in china shall be borne by party b.article 7 additional equipmentin the course of implementing the contract if it is founnecessary that,inadditionto the machinery and accessoriesalreadylisted