版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、.SALE-PURCHASE AGREEMENT CONTRACTFOR COPPER CATHODE PLATES电解铜板购销合同CONTRACT NO:合同号:This Sale-Purchase Agreement Contract SPAC is entered into this day of2008, between our Principal the Seller and Buyer as follows:此购销合同与以下买方卖方于2008年月号签定:WHEREAS:鉴于A. COMPANY LIMITED hereinafter referred to as the Selle
2、r and who with full legal and corporate responsibility, warrant that they have reliable sources under legal authority from the rightful owners of a specified quantity and quality of Copper Cathode Plates and hereby agree to sell to the BUYER hereto the aforesaid quantity and quality of Copper Cathod
3、e Plates:A. 企業股份有限公司 以下称为卖方,全责的法律与经济实体,承诺其拥有合法来源的铜板,并同意以上述协议的数量与质量卖给买方。B. hereinafter referred to as the Buyer, and who warrant that they are capable of purchasing with full legal and corporate responsibility, from the SELLER hereto the aforesaid quantity and quality of Copper Cathode Plates, and he
4、reby enter into this SPAC to purchase from the SELLER hereto the aforesaid quantity and quality of Copper Cathode Plates.B. 以下称为买方,全责的法律与经济实体,并同意以上述协议的数量与质量从卖方购买铜板。NOW THEREFORE, both Parties hereto hereby agree to willingly bind and obligate themselves to act and perform as follows:以此双方同意执行下述条款:1.0
5、 TRANSACTION CODE:Both Parties hereby agree that the Transaction Code under this SPAC shall be known as CONTRACT and hereby agree that all communication, correspondences pertaining to this SPAC shall always bear this Contract No. 1.0交易代码:双方同意此合同下的交易代码即为合同号: ,双方并同意所有关于此合同的交涉,都应与此合同号一致。2.0 PRODUCTCopp
6、er Cathode Plates to LME standard but Non LME registered,Origin :Congo DRC/Zambia.Grade :A, 99.99% purity, minimum 99.96%.Size: 914mm x 914mm x 9mm /-5%Weight: Each plate 93.8kg /- 5%Packing: Pallet bounded by metal straps and loaded into 20ft container以LMA标准但尚未注册的电解铜板原产地:刚果/赞比亚等级A99.99% 纯度(由SGS检验 可
7、以接受为99.96%)尺寸:914mmx914mmx 9mm /-5%包装:用金属带捆绑的货盘,装入20英尺的集装箱Chemical compositionCopper Cu 99.99 % not less than 99.96%Cobalt Co0.2 ppmBismuth Bi0.1 ppmLead Pb0.2 ppmManganese Mn0.1 ppmIron Fe2 ppmTellurium Te0.05 ppmNickel Ni0.2 ppmAluminium Al0.5 ppmAntimony Sb0.1 ppmMagnesium Mg0.4 ppmArsenic As0.1
8、ppmSilver Ag10 ppmSilica Si0.3 ppmSulphur S4 ppmSelenium Se0.3 ppmOxygen O nil化学成分Copper Cu 铜 99.99 % 99.96% Cobalt Co 钴 0.2 ppmBismuth 铋 Bi0.1 ppmLead Pb 铅0.2 ppmManganese 锰Mn0.1 ppmIron Fe 铁2 ppmTellurium 碲Te0.05 ppmNickel Ni 镍0.2 ppmAluminium 铝Al0.5 ppmAntimony Sb 锑0.1 ppmMagnesium 镁Mg0.4 ppmArse
9、nic As 砷0.1 ppmSilver 银Ag10 ppmSilica Si 硅0.3 ppmSulphur 硫磺S4 ppmSelenium Se 硒0.3 ppmOxygen 氧 O nil 3.0QUANTITYBoth Parties hereby agree that the Total Quantity of Copper Cathode Plates under the SPAC shall be1000MT/- 5% spot shipment based on ex-warehouse basis Hong Kong Port. Weight for invoicing
10、purposes shall be by the actual net weight.3.0数量双方同意合同总数量为1000公吨,总数量偏差上下不超过5%,在卖方香港仓库交货。发票金额按实际数量计算。4.0 DELIVERYStock is available from open warehouse in Hong Kong Port and Buyer will be notified 2 two days in advance to come for inspection and payment.The Goods will be packed in 20 footer container
11、s in a way that guarantees safety of the Copper Cathodes during transportation and which the Seller warrants are of an acceptable standard to itself.4.0交货这现货即可在香港码头公開仓库运作。卖方会于两天前会通知买方验货与付款。货品是打包装在20呎货柜内,这是保证电解铜在运送中的安全方式,同时亦是卖方保证可以接受的标准。5.0 PRICEBoth Parties hereby agree to the following Price Struct
12、ure:USDper metric ton ex warehouse Hong Kong Port 5.0价格双方同意下述价格条款:每公吨 美元FOB香港。6.0PAYMENT TERMSPayment will be by bank draft, cashiers order or TT. Payment instrument must be confirmed received in Sellers account before copper can be delivered or taken out of warehouse.6.0付款方式付款方式为银行本票,现金汇票或电汇现金,电解铜交
13、货或移出仓库前卖方必需确认银行已收到货款指示。7.0 INSPECTIONSGS inspection certificate will be provided to Buyer. Inspection is conducted during the transfer from the Bonded Warehouse to the Open Warehouse.The weighing and sampling shall be carried out by SGS in accordance with standard and customary international practic
14、es.7.0检验SGS的检验報告會提供給買方,从保税仓库移至公开仓库检验已处理。重量与取样由SGS按照国际惯例执行。Quantity Inspection:The net weight assayed by SGS shall the quantity accepted by both Parties for invoice and payment.双方接受数量以SGS检验报告做为付款的发票。Quality Inspection:This SGS certificate of Inspection shall confirm that the product is Copper Cathode
15、 Cu99.99%, not less than 99.96%.The Buyer shall have the right to reject the consignment as not complying with the standard contracted if the verified quality is less than 99.96.质量检验:每批货物应配有指派的检验员在装运港的签字的鉴定证明书SGS检验证书证明货物为99.99%,或不少于99.96%。若在装运港的检验为铜品位低于99.96%,买方有权按照未按合同标准拒收货物,这种情况下,买方可以终止合同。8.0 SHIP
16、PING DOCUMENTSThe following Shipping documents will be provided to Buyer:1. Certificate of Origin from chamber of commerce of export country2. Delivery Note signed by Buyer on Ex Warehouse Basis3. SGS Inspection Certificate4. Commercial Invoice8.0船运单据付款所需的船运单据应由卖方提供,包括以下单据:1、出口国商务部的原产地证书 。2、已签署货交至仓库
17、根据文件。3、SGS的检验证书及数量。4、商业发票。9.0OTHER DELIVERY TERMSThe Seller shall ensure that all necessary documents and applicable regulations of Local Government, Ports and Customs Authorities and other Institutions involved are strictly adhered to and complied with.Title for the goods will pass from Seller to B
18、uyer upon clearance of funds for 100% invoice value into the Sellers account by means of the agreed payment instrument.Any terms not covered by this SPAC shall be covered by INCOTERMS 2000 for ex warehouse Sales.9.0其他运输条款卖方应聘请检验代理,以确保完全符合所有的单据,当地法律规定,港口海关规定及其他规定。经买家结清100%发票货款至卖家账户后,即银行同意的指示则货款所有权将转移
19、至卖家。此合同尚未提到的条款,将按照INCOTERMS2000中对仓库交易条款的解释。10.0 TAXES AND DUTIESThe Seller will ensure that all taxes and duties imposed by the Country of Port of Origin pertaining to the export of Copper Cathode Plates have been paid.10.0税、及关税卖家支付所有的关于铜板出口方面的装运港的各项b税与关税,买家支付所有关于铜板进口方面所有到达港的税与关税。11.0 FORCE MAJEUREE
20、ither the SELLER or BUYER hereto shall be liable or responsible for any failure to fulfill their obligations and responsibilities under this SPAC, if fulfillment has been prevented orcurtailed by any circumstances whatsoever beyond the reasonable control of Seller and Buyer hereto, as the case may b
21、e including without prejudice, due to the following factors:1. Civil strike, riots or war2. Strike, lockout or labor dispute3. Adverse weather or peril of the sea or embargoes4. Delays of vessel due to breakdown provided always that nothing contained herein shall relieve the Buyer of any of his obli
22、gations to make payments due to the Seller under this SPAC according to the provision of the Payment Terms under this SPAC once the consignment is delivered.In the event of circumstances of Force Majeure lasting more than Ninety 30 days, the Buyer hereto shall have the right to cancel this SPAC part
23、ly or fully. In such a case, none of the Parties here of shall have the right to any compensation for possible losses by either party.The Party seeking relief under these provisions shall advise the other Party as soon as practical of the circumstances causing the failure to fulfill its obligations
24、and shall thereafter providesuch information as is available regarding the progress or cessation of those circumstances. The Certificate issued by the respective Chamber of Commerce in the country where Force Majeure arises shall be sufficient proof of such circumstances.11.0不可抗拒力若出现下列中双方不可控的情况,买卖双方
25、均不承担责任:1、暴乱,战争;2、罢工,停业,劳工起义;3、恶劣天气,导致无法靠泊;4、只要是船货已经发出,但船的破损造成延误,买方也应按照合同付款条例进行付款。若出现不可抗拒力的情况持续了90天,买方有权利部分或全部的撤消合同。这种情况下,双方都无权就自己的损失向对方要求补偿。提出免责的一方应在状况出现时就马上通知另一方,自己无法执行合同,并且提供状况的各方面信息,所在国商务部发出的证书可以作为不可抗拒力的证明。12.0 BREACH OF THIS SPAC/ARBITRATION/JURISDICTIONBoth Parties hereby agree that except for
26、the provisions of the Force Majeur as described under clause 11 above, any breach of any of the provisions of this SPAC shall be settled amicably between both Parties. Upon failure to reach an amicable settlement, both Parties hereby agree to submit to Arbitration under the Laws of Arbitration of th
27、e country of jurisdiction.Both parties hereby to abide by the result of the Arbitration Process. If the dispute is not resolved by arbitration and necessitate bringing the dispute under the legal process, the jurisdiction shall be that of the Courts of Law in Switzerland.12.0违约后的仲裁或起诉双方同意除了不可抗拒力外,若有
28、违约情况,首先双方协商解决,协商失败可以:双方可以向有权限的国家递交申请仲裁,仲裁结果对双方有效力,若仲裁无法解决,则有瑞士法院进行开庭审理。13.0 NON-CIRCUMVENTION/NON-DISCLOSUREBoth Parties hereby agree to keep this transaction confidential within the Parties involved herein. No disclosure to any other person, institutions, companies, corporations etc, shall be enter
29、tained or given access to information without prior consent by either Party. Nobody under the employ or assigns of either Party hereof shall circumvent either Party in transactingthe same business with any of the Principals under this transaction, whether during or after the maturity of this particu
30、lar transaction. Should any of the Parties involve herein conduct or transact the same business with any of the principals herein without the knowledge of the other Party, the Party in breach of this provision shall compensate the aggrieved Party equivalent to the commissions as committed under the
31、original transaction.13.0无欺骗与泄露条款双方同意在交易过程中对此进行保密。无另一方同意不得将交易告之任何一第三方,个人,机构或企业。在交易的过程中交易后,任何一方的雇员或指派人都不应与其他人进行相同的交易。不经过另一方知晓,与其他方进行交易,视为违约,应按照原始交易的佣金对另一方进行补偿。14.0 GENERAL PROVISIONSBoth Parties hereby agree that the English Language oral or written shall be the language to be used in any communicati
32、on pertaining to this transaction. The addresses provided herein, such as postal address, office physical address, fax, telephone, telex and email addresses, shall beused in all forms of communication. Should any of the Parties hereto change their address, such change should be communicated in writi
33、ng to the other Party. This is the SALE-PURCHASE AGREEMENT CONTRACT in its entirety. Any Additions or Amendments to be made under this SPAC shall be mutually agreed upon by both Parties hereto and shall be made in writing and forms part and parcel of the document as ANNEXES.14.0总则双方同意以英文作为合同语言,包括邮政地址,办公室地址,传真,电话,电报,电邮,都可以作为沟通的工具。若有改变,应及时通知另一方。上述为
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2026年改善睡眠行业发展行业新材料创新报告及未来五至十年行业发展趋势分析报告
- ISOIEC 9075-152023 信息技术.数据库语言SQL.第15部分多维数组(SQLMDA)标准立项发展报告
- ISO 79332023 热环境的人类工效学-利用预测热应变的计算对热应力进行分析测定和解释标准立项发展报告
- 国企销售主管岗位职责
- 风冷储能系统集成技术方案
- ISO 49902023 铸钢件交货一般技术要求标准立项发展报告
- 老年医学科危急事件处置规范
- 既有建筑屋面防水翻新工程施工组织设计
- ISO 612023 塑料.不能从特定漏斗中浇注的模塑材料表观密度的测定标准立项发展报告
- ISO 22241-42023 柴油发动机NOx还原剂AUS 32第4部分再加注接口标准立项发展报告
- 五年级语文上册同步作文
- T-CSAE 186-2021 电动汽车动力蓄电池箱火灾用气体防控装置
- DL-T5841-2021电气装置安装工程母线装置施工及验收规范
- 西藏湘河水利枢纽及配套灌区工程水土保持方案
- 穴位埋线疗法对多囊卵巢综合征的治疗效果观察
- 政府机构沟通技巧培训:提升政府公共服务水平
- 医院义务消防队组织管理
- 淫羊藿栽培技术
- 飞机隐身涂层课件
- 压疮分期及护理
- 钢铁有限责任公司大方坯连铸工程初步方案设计
评论
0/150
提交评论