《内倒平开》PPT课件.ppt

1、Tilt and Turn Mechanism Logic version,Tilt and Turn Mechanism expressly studied for premises or public buildings like schools, asylums, hospitals or hotels in which a window with particular high safety standards concerning their working and employ are required. FUTURA Logic enables first of all the

2、bottom-hung opening ( Cremone Handle at 90) and in addition , if it is necessary, the complete window opening ( cremone handle at 180).,Tilt and Turn Mechanism Logic version,In many public premises it is often required the wing opening for the ventilation (bottom-hung opening) and only if it is real

3、ly necessary the complete window opening (eventually for the cleaning), thus avoiding to put at risk the safety of the premisess users.,To satisfy this demand, Giesse combines the Logical FUTURA mechanism with the Cremone PRIMA 900 with key (art. 01152) .By turning the key in the equipment it is pos

4、sible to rotate the handle from 0 (closed) to 90 (bottom-hung), or up to 180(opening).,Mechanism TT FUTURA Logic,04753,Basic Mechanism,04764,Arm Type 1,04765,Arm Type 2,04301N,Additional Arm,Tilt and Turn FUTURA Mechanism Logic version,04770,Additional Closures,01152,Cremone PRIMA KEY 900,04753,Basi

5、c Mechanism,Bottom-hung element,Pin without point,Secondary corner cleat,Bottom-hung striker,Components that differ from the original mechanism 04751N.,Almost all the components are originated from the mechanism 04751N. The mechanism has a new bottom-hung safety system made up by an element and a st

6、riker placed on the lower cross beam (moved by a secondary corner cleat, that prevent the wing fall when the Cemone is at 90.,It is necessary to use two new arms , due to the different mechanism working. From closed- open-bottom-hung to closed-bottom-hung-opened.,04764,Arm Type 1,04765,Arm Type 2,04

7、765,04764,Preassembled Coulisse,Wing fixing system,Side adjustment,Female Hinge : Detail of the fixing system,Standard Coulisse arm 04760N/04761N,Logica Coulisse arm 04764/04765,Components that differ from the ones assembled on the mechanism 0475IN,Additional Arm The article is the same but the arm

8、is assembled in the opposite direction compared to the standard version. Bottom-hung mechanism: it is not guaranteed by the fall -proof striker contained in the mechanism 04751N , but it is possible thanks to a bottom-hung component and to the relative striker placed on the lower cross beam.,Conside

9、rable advantages for the distribution as only one article can be applied on more than one series.,In the past in addition to a TT mechanism specific for every cross section a kit called “duplex” was also necessary.,ART. 04753 applications,01152,Cremone PRIMA KEY 900,Cremone PRIMA KEY 900 art. 01152

10、ensures the mechanism AR FTURA art. 04753 the safety and correct operation for which the system has been projected.,By turning the key in horizontal position it is possble to turn the handle at 90. Possible positions: closed and bottom-hung.,By turning the key in vertical position the handle can als

11、o be turned at 180. Possible positions closed, bottom-hung and opened.,Once the right window operation has been selected, it is possible to take the key out. Only if strictly necessary the total opening of the wing, f.e. for the cleaning , will be possible ( with the key) .,In these premises the ope

12、ning of the wing for the ventilation (bottom-hung opening) is often demanded and only in case it is strictly necessary the complete opening (eventually for the cleaning), thus avoiding to put at risk the safety of the place frequenters.,To satisfy this demand, Giesse combines the Logical FUTURA mechanism and th