07 ansoft maxwell文档教程-1maxwell14 15 16官方教程15 0maxwell_2d_15 0_v1lectures_trainee00_0_maxwell_front_cover_color

1、 Maxwell 2D Electromagnetic and Electromechanical Analysis electronic design automation software users guide Maxwell 2D ANSYS Inc Southpointe 275 Technology Drive Canonsburg, PA 15317 The information contained in this document is subject to change without notice. ANSYS Inc. makes no warranty of any

2、kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ANSYS Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or u

3、se of this material. 2010 ANSYS Inc. All rights reserved. ANSYS Inc. Southpointe 275 Technology Drive Canonsburg, PA 15317 (T) 724-746-3304 (F) 724-514-9494 Ansoft Maxwell, Simplorer, RMxprt and Optimetrics and any and all ANSYS, Inc. brand, product, service an

4、d feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners. New editions of this manual will incor

5、porate all material updated since the previous edition. The manual printing date, which indicates the manuals current edition, changes when a new edition is printed. Minor corrections and updates which are incorporated at reprint do not cause the date to change. Update packages may be issued between

6、 editions and contain additional and/or replacement pages to be merged into the manual by the user. Note that pages which are rearranged due to changes on a previous page are not considered to be revised. Edition: REV6.0 Date: 13 March 2012 Software Version: 15 Maxwell 2D Users Guide Contents This d

7、ocument discusses some basic concepts and terminology used throughout the ANSYS Maxwell application. It provides an overview of the following topics: Overview 1.0 - Maxwell 2D Examples Eddy Current 6.1 Jumping Rings Axisymmetric Model 6.3 Instantaneous Forces on Busbars Examples Transient 7.1 Gapped

8、 Inductor Model 7.2 - Solenoid Problem with an External Circuit 7.4 Core Loss Examples Basic Exercises 9.1 Electrostatic 9.2 DC Conduction 9.3 Magnetostatic 9.4 Parametric 9.5 Transient 9.6 Transient with Circuit Editor 9.7 Post-processing 9.8 Optimetrics 9.10 Scripting 9.12 Eddy Current 9.13 Rotational Transient Motion 9.14 Boundary Conditions 9.15 Permanent Magnets Assignment Examples Motors 11.1 - ANSYS Electrical Machine Design Reference 11.2 - Permanent Magnet Synchronous Machine 11.3 - Three-Phase Inductio