Soldedge大学教材-第一章.ppt

Usability Enhancements,Usability Enhancements,SmartStep Enhancements QuickPick Enhancements Dynamic Edit for Solve Depth RMB for Input Acceptance ToolTips on Menu Items,SmartStep Enhancements,For V15, the SmartStep Ribbon bar has been streamlined The Ref. Plane creation and “Select from Sketch” options are now located in a pull-down list Feature Plane and Last Plane have also been added to the pull-down list The list is automatically configured for each feature to only display what is applicable,SmartStep Enhancements,A new button has been added for the new extend options for extruded features A new ribbon bar gives the users the ability to add draft and crowning for extruded features (see the ConsumerProducts.ppt for more detailed information on the new feature extent options),SmartStep Enhancements,The From-To extent option has been enhanced to include an offset distance Eliminates the need for downstream features to trim faces,From/To Extent,From,To,SmartStep Enhancements,A new option has been added to the keypoint filter for extend and offset options to locate any keypoint Gives the user the ability to locate Endpoints, Midpoints, Center Points, Tangent Points, Silhouette Points and Edit Points of a Curve without changing the filter,QuickPick Enhancements,Enhancement to both the look and accessibility of QuickPick in all environments Icons have been added and a larger dialog displayed Accelerated method is included to reduce wait state,QuickPick Enhancements,QuickPick now displays the element names and icons in each environment The elements, parts or features still highlight as the cursor passes over each as in V14,QuickPick Enhancements,QuickPick is now available in the Draft and Profile environments,QuickPick Enhancements,QuickPick now has an options dialog for default settings,The amount of time the cursor must be idle before the QuickPick option becomes available,The maximum height affects how many items can be displayed without scrolling (Up/Down arrows or mouse Scroll Wheel can be used to scroll),The width setting affects how much information you wish to see for each item (Setting this to 50 only displays the Icon when the scroll bar is active),QuickPick Enhancements,User can set QuickPick to be invoked by either a Left Mouse Button Click (as in V14) or a Right Mouse Button click By setting to a RMB click, the user can make selections with a LMB click and never accidentally invoke QuickPick If using the LMB click option, setting the Timer to a longer delay gives the user a better opportunity to click the current selection without invoking QuickPick If the option is checked, the icon that appears next to the northwest arrow will show which option has been selected,Dynamic Edit for Solve Depth,There is a new option on the Tools/Option dialog on the General tab to control the solve depth for Dynamic Edit “Recompute continually during edit“ which will solve the model on each mouse move (as in V14) “Recompute after edit“ will solve the current edited profile on mouse move, but solve the remaining model on mouse “up” (on release of the LMB),Dynamic Edit for Solve Depth,“Recompute after edit“ is needed for large models where the dynamic edit of a profile is delayed while the model “catches up” with the edit This allows the user to make necessary changes to a profile without having to enter the profile environment,Dynamically edit the curve and calculate the downstream features on mouse up,Dynamic Edit for Solve Depth,DEMO,RMB for Input Acceptance,Users now have quick access to accepting selected inputs by simple RMB click When a select step or function within a command uses a green checkmark to accept inputs, a RMB (right mouse button) click or pressing Enter will accept the inputs in the same manner as clicking directly on the button When a RMB click is executed or Enter is pressed while the Finish button or its equivalent is the default button, the inputs to the command will be accepted,RMB for Input Acceptance,Commands that currently terminate when RMB is clicked will no longer do so Exception to this rule is the Edit Formula command RMB and Enter accepts the input, applies the formula, and terminates the command,ToolTips on Menu Items,Users can now see a ToolTip for items from the Pull-down menus The Tooltips displayed in the command line are often blocked by the menu Decrease the amount of time that new users can get up to speed with commands in Solid Edge,More Usability Enhancements,Profile Color by Degree of Freedom (DOF) Simplified Select Filters More Units of Measure for Density Where Used in Solid Edge,Profile Color by Degree of Freedom (DOF),Enables an individual profile color based on Fully-defined, Under-defined, Over-defined, and Inconsistent constraints Gives the user better feedback as to the variability of a profile or sketch,Profile Color by Degree of Freedom (DOF),User can toggle between user defined colors and constraint color from the Inspect Pull-down menu Global setting for the entire model,Simplified Select Filters,Enhanced select filters for Part, Sheet Metal, and Weldment Filter Simplification Default Item Remove required changes to the select filter when needing various inputs that are similar in nature,V14,V15,More Units Of Measure for Density,Additional UOMs have been added for part density Kg/dm3 Kg/L g/dm3,V14,V15,Where Used in Solid Edge,Added where-used searches to the Solid Edge product environments for managed and unmanaged documents Added a where-used shortcut for documents in Assembly Pathfinder, selected graphics, Assembly Select Tool and, to the results in the Revisions dialog The user can select the where-used shortcut for any document, or documents, in the assembly, regardless of how deep they are in the assembly structure,Where Used in Solid Edge,Where Used Dialog “Look in” allows the user to browse to