BTS配置命令介绍.ppt

moto数据库结构和基站配置,moto基站配置,equip bts/cab,add cell,equip rft/dri,equip path/rsl,equip btp/msi,add neighbor,equip bts/cab,bts配置 命令格式：equip 0 site site identifier: 1 function id for the lcf: 8 注:0-指bsc site identifier:输入站号(1-99) lcf:链路控制处理器(link control function),对应 指定的gproc。,机柜配置 命令格式 equip cab cabinet identifier: 15 (0 15) cabinet typecabinet_type: horizonmacro frequency typefrequency_type: pgsm 1 cabinet identifier: 机柜识别号(1-15) cabinet typecabinet_type: 机柜类型 0 25 对应各种机柜类型见附表 frequency typefrequency_type: 频率类型 1 - pgsm 2 - egsm 4 - dcs1800 8 - pcs1900,设置bts参数 chg_element 参数包括各种bts定时器,计数器,add cell,命令格式： 添加小区: add_cell 其它参数设置: chg_cell_element 小区统计设置: stat_mode chg_stat_prop,equip btp/msi,配置主控板(mcu): equip btsno btp btp identifier: 0 配置2m板(niu): equip btsno msi msi identifier: cage number: slot number: msi typemsi_type: 设置mms参数: modify_value btsno ber_oos_mon_period 60 mms 0 0 0 modify_value btsno ber_restore_mon_period 60 mms 0 0 0,equip rft/dri,equip rft type of carrier: bcch rtf identifier: 0 0 primary unique path id is: 0 gsm cell to which this carrier is assigned: 460 01 21601 1011 carrier absolute radio freq. channel: 118 carrier frequency hopping indicators: 255 255 255 255 255 255 255 255 carrier training sequence codes: 1 1 1 1 1 1 1 1 sdcch loadsd_load: 2 sdcch placement prioritysd_priority: 0 channel allocation prioritychan_alloc_priority: 2 packet radio capabilitypkt_radio_type: 16k half rate enabled: 1 allow_8k_trau: yes,equip dri dri identifier: 0 0 dri densitydri_density: single transceiver flag: 0 cabinet identifier: 15 type of connection to the btp: master port to which the tcu is connectedtcu_port: 0 rtf identifierpref_rtf_id: gsm cell id where the dri appears: 460 01 21601 1011 antenna select number for this cellantenna_select: 1 tuneable combining used: no the diversity flag for this dri isdiversity_flag: 1 the fm cell type isfm_cell_type: 4,equip path/rsl,equip path terminating site id is: the unique path identifier is: bsc mms identifiers: site identifier: upstream mms identifiers:,菊花链连接实例,site 9,site 75,site 80,site 1,mms 0 0 mms 0 1,mms 0 0 mms 0 1,mms 0 0 mms 0 1,mms 0 0 mms 0 1,mms 8 0 mms 8 1,bsc,site 9 ,site 75菊花链path配置数据如下: site 9/path 9 equip 0 path terminating site id is: 9 the unique path identifier is: 0 bsc mms identifiers: 8 1 site identifier: 8 upstream mms identifiers: 0 0,site75/path75 equip 0 path terminating site id is: 75 the unique path identifier is: 0 bsc mms identifiers: 8 1 site identifier: 9 upstream mms identifiers: 0 0 downstream mms identifiers:0 1 site identifier:75 upstream mms identifiers: 0 0,equip rsl equip 0 rsl 1st device id for the rsl: 2st device id for the rsl: the unique path identifier is: lapd t200_timer: lapd_n200: lapd_k:,add neighbor,add_nei neighbor cell id: 460 01 21601 (5461h) 1012 (03f4h) neighbor cell name: no name defined neighbor cell frequency type: pgsm placement: internal synchronization enabled: 1 (yes) frequency in the ba_bcch list: 1 (yes) frequency in the ba_sacch list: 1 (yes) frequency in the ba_gprs list: 0 (no) bcch frequency number: 124 base station identity code: 1 ms transmit power maximum: 33 neighbor receive level minimum: 15 neighbor handover margin: 5 power budget surrounding cell hreqave: 6 receive quality handover margin: 4 receive level handover margin: 6 neighbor type 5 handover margin: 63