中亿通达智能家居说明书.docx

Product IntroductionAllone smart remote control is a smart product connected to internet through WiFi,and replaced the traditional IR remote control by using the smart phone,to control the home IR devices(such as airconditioner,TV,Set-Top Box,DVD,stereo system) and other light smart products.Product featuresSupport WiFi network.Support SmartLink net technology, fast connection in 2S.Support controlling all IR home appliancesRemote control your home appliances before you are arrived at home.Setting scenario, DIY your favorite.Easy installation.Combining ZYT WiFi smart switch can control whole house light.Light control signal can cover 200 house.Product ParameterItem no.:ZYT118AInput voltage:DC 5V Input current: 600mAIR transmission frequency:38KHZRF transmission frequency:433MHz ASKWireless standard:WiFi-2.4GHz b/g/nWireless consuming:0.3WSecurity type:WEP/WPA-PSK/WPA2-PSKWorking environment:IndoorWorking condition: temp: -2060 Working humidity: 80%P2:User guide1). Gaining the client softwareMethod 1:scan the QR code to get the client software freelyMethod 2: iOS user enter App Store to input “WiWo” to get free client software; Android user enter “Google Play” or other main market users enter “WiWo” to get free client software;2) Smart LinkPower on, the indicator red light flashing fast(about 5times/second),Allone is on the status of SmartLinkP3When the mobile APP enters the page”setting”,input the current WiFi password then start the setting:When setting done successfully,then slip the page of “equipment list”and click “equipment” to enter “equipment management”P43)AddDeviceEnter”+” in the device interface to enter “add” device list and choose “creating new device”4) DeviceManagementLong press to enter “device management”,available to re-name,lock,modify remote password and delete device and other operations:P55) Study The Infrared CodeLong press the code key to enter the status of code6) The Infrared Code LibraryThe airconditioner remote control will enter Cloud infrared code library to match when code successfully for the first time:P6Indication;1. It needs wirelss router to connect the internet when using cloud code library;2. Apple TV and XiaoMi box who have inside remote control software,no need study7)Study ZYT artistic smart switchLong press touching key, and once there a sound of “DI” then to releaseIndication:1. If fail to control after clicking 3 times,please re-operate the processing of code2. The light switch is available that only needs to study one key P78) Mode SettingEnter the setting mode,it is available to add multi devices and operationWarm reminder:APP will last to update,there would be a little difference between user interface and operation guide.If any problems during using,please refer to “help” information in APP or contact with ORVIBO technique supporters. P8Indication Light StatusIndication light status status explanationRed light fast flash(5times/second) SmartLink flashing configuration mode Red light on long time Infrared code status Blue light fast flash(5times/second) AP configuration modeBlue light slow flash Trying to connect the routerBlue light breathing WiFi and cloud service in workingPurple light breathing WiFi already connected,cloud service non-connected Indication:When no operation(around 1 minute),Allone is going to hibernateInstallation Way Package ListAllone smart remote controller 1Power adapter 1Micro USB cable 1Installation screw and tape 1Allone smart remote controller instruction manualP9Common Questions FAQQ1:How is the device set successfully?A1:The device connected to the internet successfully,Allone indicator light is on blue or purple breathing statusQ2:What reasons for failing to set the device?A21) Plese check APP is the newest version2) Please check our Android smart phone,PAD system version is above 2.33) During the App setting,WiFi name is not appearing automatically(SSID),please check your mobile phone has connect to WiFi4) Please input the password of router again5) Please check your WiFi working normally6) Please check your router starting using AP isolation,MAC binding,SSID hiding,please turn it off7) Please check your router supporting the standard of IEEE802.11b/g/n 8) The router has special device setting,if under the condition of public or company,need to input user name to connect the internet,which condition is not supported to use9) Please check your router using WEP,WPA-PSK or WPA2-PSK security certificate way to set router password,then to recommend to use WPA/WPA210) Please check your router allowing the connected IP non-overdue maximum limit When the above solutions are not working,please recover to the factory setting,and re-set it or take AP configurationQ3:How to do “AP setting”?A3:When the red light flashing,press long the key of “Reset” and change into blue light flashing,then enter into AP setting.And operate according to the interface indication.Q4:There are multi Allones in the same WiFi condtion,how to distinguish it?A4:1.Name it seperately when doing setting each Allone 2.If dont have name,please press the key of “Reset”,the Allone logo will flash in APP Q5:What is the use of “changing the password of long-distance”?A5:There is nobody can control your device remotely after changing the password of long-distance”.For example,when your fri