Nexus 9508版本升级.doc

文档总标题 Nexus 9508版本升级版本 V1.0密级开放内部机密 类型讨论版测试版正式版修订记录修订日期修订人版本号审核人修订说明2016.6.14朱军杰1.0初稿目录1升级目的31.1当前版本：31.2目标版本：32USB方式33条件准备44操作过程44.1保存当前设备配置44.2插上U盘并格式化44.3拷贝IOS到U盘44.4U盘插到引擎上，检查U盘内容44.5拷贝U盘中的IOS到bootfalsh44.6检查bootflash文件拷贝成功54.7弹出U盘54.8检查IOS的MD5值54.9检查新版本对设备的影响54.10开始安装新IOS84.11提示会导致设备重启,是否继续,输入 Y104.12启动过程console输出如下：124.13重启完成后，查看当前版本已经为新的7.0.3131 升级目的BGP EVPN VXLAN需要7.0以上版本支持。1.1 当前版本：Software BIOS: version 08.06 NXOS: version 6.1(2)I3(3a)1.2 目标版本：7.0(3)I2(2B)1.3 升级方式说明升级方式可支持以下多种l FTPl TFTPl USB如果是在现场，推荐使用USB方式，最为方便。本次的升级就是USB方式。2 USB方式通过引擎面板上的USB端口进行IOS拷贝。3 条件准备l 新的IOSl U盘 (容量1G以上)l 笔记本电脑l Console线4 操作过程4.1 保存当前设备配置LG_2_2_B6_cisco_nexus_9508-1# copy running-config startup-config # 100%Copy complete.4.2 插上U盘并格式化LG_2_2_B6_cisco_nexus_9508-1# format usb1: This command is going to erase the contents of your usb1:.Do you want to continue? (yes/no) y yFormatting usb1:Formatting completed4.3 拷贝IOS到U盘4.4 U盘插到引擎上，检查U盘内容SWITCH-9508# dir usb1: 538114048 Apr 04 23:54:24 2016 nxos.7.0.3.I2.2b.bin4.5 拷贝U盘中的IOS到bootfalshSWITCH-9508# copy usb1:nxos.7.0.3.I2.2b.bin bootflash:nxos.7.0.3.I2.2b.bin Copy progress 100% 538114KBCopy complete, now saving to disk (please wait).4.6 检查bootflash文件拷贝成功SWITCH-9508# dir bootflash: 0 Nov 20 12:55:12 2015 20151120_125512_poap_6630_init.log 143 Feb 24 11:42:13 2016 20160224_114208_poap_7573_init.log 16384 Nov 20 12:28:43 2015 lost+found/ 353433088 Nov 20 12:44:27 2015 n9000-dk.I3.3a.bin 538114048 Apr 06 11:17:48 2016 nxos.7.0.3.I2.2b.bin 4096 Nov 20 12:29:30 2015 onep/ 4096 Feb 24 11:40:12 2016 scripts/ 4096 Feb 24 13:59:25 2016 virt_strg_pool_bf_vdc_1/ 4096 Feb 24 13:59:13 2016 virtual-instance/ 4096 Feb 24 13:59:02 2016 virtual-instance-stby-sync/ 112 Feb 24 13:56:21 2016 virtual-instance.conf4.7 弹出U盘弹出的命令和Linux环境中类似。SWITCH-9508# unmount usb1:4.8 检查IOS的MD5值检查是否与官网的MD5值一致，若一致则说明文件无损坏。SWITCH-9508# show file bootflash:nxos.7.0.3.I2.2b.bin md5sum 02c06a20fd815ae895928966c45ab08d4.9 检查新版本对设备的影响SWITCH-9508# show install all impact nxos bootflash:nxos.7.0.3.I2.2b.binInstaller will perform impact only check. Please wait. uri is: /nxos.7.0.3.I2.2b.bin Verifying image bootflash:/nxos.7.0.3.I2.2b.bin for boot variable nxos.# 100% - SUCCESSVerifying image type.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing bios version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing nxos version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPerforming module support checks.# 100% - SUCCESSNotifying services about system upgrade.# 100% - SUCCESSCompatibility check is done:Module bootable Impact Install-type Reason- - - - - 1 yes disruptive reset Incompatible image 2 yes disruptive reset Incompatible image 3 yes disruptive reset Incompatible image 22 yes disruptive reset Incompatible image 23 yes disruptive reset Incompatible image 24 yes disruptive reset Incompatible image 26 yes disruptive reset Incompatible image 27 yes disruptive reset Incompatible image 28 yes disruptive reset Incompatible image 29 yes disruptive reset Incompatible image 30 yes disruptive reset Incompatible imageImages will be upgraded according to following table:Module Image Running-Version(pri:alt) New-Version Upg-Required- - - - - 1 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 1 bios v01.42(00:v01.42(00 v01.42(00 no 2 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 2 bios v01.42(00:v01.42(00 v01.42(00 no 3 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 3 bios v01.42(00:v01.42(00 v01.42(00 no 22 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 22 bios v01.42(00:v01.42(00 v01.42(00 no 23 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 23 bios v01.42(00:v01.42(00 v01.42(00 no 24 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 24 bios v01.42(00:v01.42(00 v01.42(00 no 26 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 26 bios v01.42(00:v01.42(00 v01.42(00 no 27 nxos 6.1(2)I3(3a) 7.0(3)I2(2b) yes 27 bios v08.06(09/10/2014):v08.06(09/10/2014) v08.18(08/11/2015) yes 28 nxos 6.1(2)I3(3a) 7.0(3)I2(2b) yes 28 bios v08.06(09/10/2014):v08.06(09/10/2014) v08.18(08/11/2015) yes 29 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 29 bios v01.42(00:v01.42(00 v01.42(00 no 30 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 30 bios v01.42(00:v01.42(00 v01.42(00 no4.10 开始安装新IOSSWITCH-9508# install all nxos bootflash:nxos.7.0.3.I2.2b.binInstaller will perform compatibility check first. Please wait. uri is: /nxos.7.0.3.I2.2b.bin Verifying image bootflash:/nxos.7.0.3.I2.2b.bin for boot variable nxos.# 100% - SUCCESSVerifying image type.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing bios version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing nxos version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPreparing lcn9k version info using image bootflash:/nxos.7.0.3.I2.2b.bin.# 100% - SUCCESSPerforming module support checks.# 100% - SUCCESSNotifying services about system upgrade.2016 Apr 6 11:24:41 SWITCH-9508 %VMAN-2-DEACT_FOR_ISSU: ISSU validation in progress. Active VMs will be deactivated for the duration. Max (1800s)2016 Apr 6 11:24:41 SWITCH-9508 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on vsh.241682016 Apr 6 11:24:47 SWITCH-9508 %VMAN-2-ACTIVATION_STATE: Successfully deactivated virtual service guestshell+ # 100% - SUCCESSCompatibility check is done:Module bootable Impact Install-type Reason- - - - - 1 yes disruptive reset Incompatible image 2 yes disruptive reset Incompatible image 3 yes disruptive reset Incompatible image 22 yes disruptive reset Incompatible image 23 yes disruptive reset Incompatible image 24 yes disruptive reset Incompatible image 26 yes disruptive reset Incompatible image 27 yes disruptive reset Incompatible image 28 yes disruptive reset Incompatible image 29 yes disruptive reset Incompatible image 30 yes disruptive reset Incompatible imageImages will be upgraded according to following table:Module Image Running-Version(pri:alt) New-Version Upg-Required- - - - - 1 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 1 bios v01.42(00:v01.42(00 v01.42(00 no 2 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 2 bios v01.42(00:v01.42(00 v01.42(00 no 3 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 3 bios v01.42(00:v01.42(00 v01.42(00 no 22 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 22 bios v01.42(00:v01.42(00 v01.42(00 no 23 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 23 bios v01.42(00:v01.42(00 v01.42(00 no 24 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 24 bios v01.42(00:v01.42(00 v01.42(00 no 26 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 26 bios v01.42(00:v01.42(00 v01.42(00 no 27 nxos 6.1(2)I3(3a) 7.0(3)I2(2b) yes 27 bios v08.06(09/10/2014):v08.06(09/10/2014) v08.18(08/11/2015) yes 28 nxos 6.1(2)I3(3a) 7.0(3)I2(2b) yes 28 bios v08.06(09/10/2014):v08.06(09/10/2014) v08.18(08/11/2015) yes 29 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 29 bios v01.42(00:v01.42(00 v01.42(00 no 30 lcn9k 6.1(2)I3(3a) 7.0(3)I2(2b) yes 30 bios v01.42(00:v01.42(00 v01.42(00 no4.11 提示会导致设备重启,是否继续,输入 YSwitch will be reloaded for disruptive upgrade.Do you want to continue with the installation (y/n)? n yInstall is in progress, please wait.Performing runtime checks.# 100% - SUCCESSSyncing image bootflash:/nxos.7.0.3.I2.2b.bin to standby.# 100% - SUCCESSSetting boot variables.# 0%2016 Apr 6 11:30:15 SWITCH-9508 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by root on vsh.24378# 100% - SUCCESSPerforming configuration copy.# 100% - SUCCESSModule 1: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 2: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 3: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 22: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 23: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 24: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 26: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 27: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 28: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 29: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSModule 30: Refreshing compact flash and upgrading bios/loader/bootrom.Warning: please do not remove or power off the module at this time.# 100% - SUCCESSFinishing the upgrade, switch will reboot in 10 seconds.安装完成，系统提示会有10秒钟内重启4.12 启动过程console输出如下：可以看到已经加载了新的版本Time: 4/6/2016 11:35:25Detected CISCO IOFPGABooting from Primary Bios Code Signing Results: 0x0 Using Upgrade FPGAFPGA Revison : 0x22FPGA ID : 0x1168153FPGA Date : 0x20140915Reset Cause Register: 0x20Boot Ctrl Register : 0x60ffEventLog Register1 : 0x2000000EventLog Register2 : 0xfbc77fffVersion 2.16.1240. Copyright (C) 2013 American Megatrends, Inc. Board type 1IOFPGA 0xe8000000SLOT_ID 0x1bEOR chassis check_bootmode: grub: Continue grubTrying to read config file /boot/grub/menu.lst.local from (hd0,4) Filesystem type is ext2fs, partition type 0x83Booting bootflash:/nxos.7.0.3.I2.2b.bin .Booting bootflash:/nxos.7.0.3.I2.2b.bin Trying diskboot Filesystem type is ext2fs, partition type 0x83IOFPGA ID: 1168153 Image validImage Signature verification was Successful.Boot Time: 4/6/2016 11:36:0INIT: version 2.88 bootingUnsquashing rootfs .Loading IGB driver .Installing SSE module . doneCreating the sse device node . doneLoading I2C driver .Installing CCTRL driver for card_type 3 .CCTRL driver for card_index 21000 .old data: 4000004 new data: 1Checking SSD firmware . Model Number: Micron_M550_MTFDDAT064MAY Serial Number: MSA184902X1 Firmware Revision: MU01 Checking all filesystems.Installing default sprom values . done.Configuring network .Installing LC netdev .Installing psdev .Installing veobc .Installing OBFL driver .tune2fs 1.42.1 (17-Feb-2012)Setting reserved blocks percentage to 0% (0 blocks)Starting portmap daemon.creating NFS state directory: donestarting 8 nfsd kernel threads: donestarting mountd: donestarting statd: doneSaving image for img-sync .Loading system softwareInstalling local RPMSPatch Repository Setup completed successfullydealing with default shell.file /proc/cmdline found, look for shellunset shelltype, nothing to do.user add file found.edit itUncompressing system image: Wed Apr 6 11:36:23 UTC 2016blogger: nothing to do.4.13 重启完成后，查看当前版本已经为新的7.0.3SWITCH-9508# sh version Cisco Nexus Operating System (NX-OS) SoftwareTAC support: /tacCopyright (C) 2002-2016, Cisco and/or its affiliates.All rights reserved.The copyrights to certain works contained in this software areowned by other third parties and used and distributed under their ownlicenses, such as open source. This software is provided as is, and unlessotherwise stated, there is no warranty, express or implied, includin