TCA显微镜驱动安装说明书.doc

Quick Guide byCMOS 相机快速拍摄指导CMOS CameraHardware /software installation 软硬件安装Auto install: 驱动自动安装1. Put the driver disk into your computer.将光盘放入光驱.2. ChooseDriverfolder.选择驱动文件夹.3.Double click exe file.And click next by next.双击 exe 文件,安装驱动.4. Click “continues”, and install it.点击仍然继续安装驱动.Restart the computer to finish the install.重启电脑完成安装2 .Connect the camera to the USB2.0 interface, system will prompt the following window. Select “Yes, only thistime”, and then click “Next”.插入 USB 口In Vista, the driver will install auto. ( Vista 系统则自动安装) In Xp and 2000 system, please follow these step. Select “Manual install software”，click “Next”.手动安装驱动. Select “Install the software automatically”, click“next”to finish.选择自动安装,选择”Next”,到安装结束3Manual install: (手动安装驱动)1.ConnectthecameratotheUSB2.0interface, system will prompt the following window. Select “Yes, only this time”, and then click “Next”.插入 USB 口2.Select “Manual install software”，click “Next”.手动安装驱动3. Select “From list or an assigned position”, click “next”. Then select the driver catalogue and continue.从列表中选择驱动4. System informs that the program hasnt passed the Windows test, click “continue”. (Whether it passes the Windows test or not do not affect the use of the camera）选择“仍然继续”5. After installation, click “Finish”. Then the apparatuses can work properly.完成6.Restart the system(Recommend by some conditions).重新启动（建议）4Installation Tsview6.X.X.XOpen the new“Tsview”file, double click “Tsview.exe”, and according to the prompt to finish Tsview installation.1. Double click “setup.exe” then click next by next.双击应用程序安装 Tsview 软件2. click “Finish”.完成5Camera previewing and shooting相机预览和拍摄1. Click “Detect camera” as showed on the right image.点击“检测相机”2. Click “Preview” to watch the live image点击“预览”， 图像就实时显示出来3. Click “auto white balance” to get a normal image color.点击“自动白平衡”，调整好白平衡4. nd click “Advance”-Setting ”- adjust some setting some value is recomand:Gain0, Gamma： 1,Color enhance: enable, Saturation:100-128点击“设置”进入设置菜单，几个主要默认值： 增益小于Gamma： 1 颜色增强：开启 饱和度：100-12865. Set right exposure time in exposure menu,设置合适的曝光值下，6. Then you can click capture and get the picture that you want.祝您成功！FAQ:When we use the cameras, We can not see the pictures in high resoluti