艾立尔科技T5050W3B-KH-A3规格书.doc

ShenZhen JFY Optoelectronics Co.,Ltd T5050W3B-KH-A3Customer:艾立尔科技有限公司Technical Data SheetPN: T5050W3B-KH-A3For: IF= 20 MAContents1. Features2. Applications3. Package outline dimension4. Absolute maximum ratings5. Electrical-optical characteristics6. BIN range7. Reliability test items and conditions8. Typical Electro-Optical Characteristics Curves9. Tapping specifications10. Package method11. Precautions for useCustomer confirmApproved byChecked byIssued by深 圳 市 晶 方 圆 光 电 有 限 公 司深圳市宝安区固戌水产井湾第一工业区B栋八楼Address: 8th Floor,Building B,1st Industrial Park,Shuichan Jingwan, Gushu,Xixiang,Baoan, Shenzhen,China TEL：86+755+29466158 / 155FAX：86+755+294661531. Features: Appearance:1.1 Package: 5.0*5.0*1.6mm1.2 Emitted Color: White。1.3 Mono-color type1.4 Soldering methods: All SMT assembly methods1.5 Comply RoHS standard.2. Applications:2.1 LCD back light.2.2 general lighting.3. Package Outline Dimension:NOTES:1All dimensions are in millimeters (inches).2Tolerance is 0.10mm unless otherwise specified.3pecifications are subject to change without notice.4. Absolute Maximum Ratings(Ta=25)ParameterSymbolRatingUnitPower DissipationPd200mWForward CurrentIF20*3mAPeak Forward Current 1IFP100mAReverse VoltageVR5VSoldering TemperatureTsol260 (for 5 seconds)Operating TemperatureTopr-2070-Storage TemperatureTstg-3080-Electrostatic dischargeESD2000V 1 IFP condition: pulse width 0.1msec,duty cycle1/105. Electrical-optical characteristics(Ta=25)ParameterSymbolMin.Typ.Max.UnitConditionForward VoltageVf2.9-3.5VIF=20*3mALuminous IntensityIv5000-7000mcdLuminous IntensityLm15-18lmCCTCCT55006500KViewing Angle 21/2-120-degReverse CurrentIR-5AVR=5VNote: 1. Tolerance of luminous intensity is 5%2.Tolerance of forward voltage is 0.03V6BIN rangeLuminous intensity (tolerance is 10% If=20*3mA):Min. (mcd)Max.( mcd)5000600060007000 Forward voltage (tolerance is 0.05VIf=20*3mA):Min.(v)Max.(v)2.93.13.13.33.33.5CIE Chromaticity Diagram7. Reliability test items and conditions: No.Test ItemTest ConditionsSample sizeAc/Re1Operation LifeTest If=DC20mATemp: Room temperature Test time=1000hrs220/12High Temperature Storage High Temp. =+85Test time=1000hrs220/13Temperature Cycle-35 +10015min 5min 15min Test Time=100cycle220/14High TemperatureHigh HumidityTemp. =+60RH=90%HRTest time=500hrs220/15High Temperature Storage High Temp. =+85Test time=1000hrs220/16Low TemperatureStorage Low Ta=-35Test time=1000hrs220/17Reflow SolderingOperation heating：260(Max.), within 10seconds. (Max.)220/1 Judgment criteria of failure for the reliability Iv: Below 50% of initial values Vf: Over 20% of upper limit value IR: Over 2 times of upper limit valueNote: Measurement shall be taken between 2 hours and after the test LED have been returned to normal ambient conditions after completion of each test.8. Typical Electro-Optical Characteristics Curves9.Tapping specifications (Units: mm) Loaded quantity: 1000 pcs/reel10. Package Method:(unit:mm)11Precautions for use :11.1 Soldering SMD LED encapsulation gumwater is very flexible, outside force easily demolish radiant surface and plastic, As soldering , Please handle with care ！ a. With No-clean Flux, according to reflow soldering cure condition when soldering, Reflow soldering should not be done more than two times, simultaneity you must insure clean on the radiant surface. Otherwise, foreign objects can affect radiant color. b. Dont process manual soldering except repair. Recommended to be soldered with 25W Anti-static iron, The temp. of the iron should be lower than 300 and soldering time should not be done more than three seconds, at the same time iron cant touch radiant surface and plastic. c. Dont twist LED in course of manual soldering and experiment, Otherwise, the lights will not work possibly. Note:a) Reflow soldering should not be done more than two times. b) Dont put stress on the LEDs when soldering. c) Dont warp the circuit board before it have been returned to normal ambien。11.2 Storagea. Dont open the moisture proof bag before ready to use the LEDs. b. The LEDs should be kept at 30 or less and 60%RH or less before opening the package. The max. storage period before opening the package is 1 year. c. After opening the package, the LEDs should be kept at 30-35%RH or less, and it should be used within 3 days. d. If the LEDs be kept over the conditions of c., baking is required before mounting. Baking condition as below: 755 for 12 hrs ，or 605 for 24 hrs。e. The environment have no acid、alkali、corrosive gas、intensively shake and high magnetic field.11.3 Cleaninga .Dont be cleaned with ultrasonic. Recommended to be wiped with isopropyl alcohol or pure alcohol, wiping time should not be more than one minute. LED must be placed at room temperature for fifteen minutes before using. after cleaning, you must insure clean on the radiant surface. Otherwise, foreign objects can affect radiant color.b. LED can not be in contact with isoamyl acetate、trichloroethylene、acetone、sulfid、nitride、acid、alkali、salt. These matter can destroy LED.11.4 Sealinga .Sealing glue can not contain sodium ion、sulfid，because these matter can affect fluorescence powder poisoning.b .When using normal sealing glue, Recommended to be operated life for 168hrs under normal temperature.11.5 Statica .Static and Peak surge voltage can destroy LED, Avoiding Instantaneous voltage when turn on or turn off the lights.b. Please wear Anti-static wrist band、Anti-static glove、Anti-static shoes in the course of operation, and the equipment must be grounded.c .After LED is be destroyed, leakage current increase obviously, and it will be forward voltage falling or failure lamp in the case of low current.12.6 Te