英国焊接标准.doc

英国焊接标准(BS welding standards)ANSI| BS| DIN| EN| GB| ISO| JIS| NF| DIC 编号中文名称英文名称BS 1722-10-2006 栅栏.链节和焊接筛网的防盗栅栏用规范 Fences - Specification for anti-intruder fences in chain link and welded mesh BS 1894-1992 焊接结构的电热锅炉的设计和制造规范 Specification for design and manufacture of electric boilers of welded construction BS 2790-1992 焊接结构的壳式锅炉的设计和制造规范 Specification for design and manufacture of shell boilers of welded construction BS 2S 510-1970 碳钢薄板和带材规范(430/540 MPa)(适用于焊接) Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding) BS 2S 511-1970 深拉碳钢薄钢板和带材的规范(280/400 MPa)(适用于焊接) Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding) BS 2S 514-1969 碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) BS 2S 515-1969 碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) BS 2S 92-1964 飞机材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸) Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) BS 2T 66-1980 19/10铬-镍耐腐蚀钢管材规范(铌稳定的:550MPa)(可焊接) Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) BS 2T 68-1980 冷拉18/10铬-镍耐腐蚀钢管材规范(铌稳定的:800MPa)(可焊接) Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) BS 3604-2-1991 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes BS 3799-1974 石油工业用钢管配件、螺旋管接头和套管焊接规范 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry BS 3T 53-1980 铬-钼钢管材规范(700MPa)(管外径不小于12.5mm)(可焊接) Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) BS 4129-1990 板材钢电阻焊用焊接底剂、焊透密封剂、粘合剂和蜡规范 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel BS 4449-2005+A2-2009 混凝土增强钢.可焊接增强钢.棒材、卷材和拆卷产品.规范 Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification BS 4515-1-2009 陆地和近海钢管焊接规范.碳和碳锰钢管 Specification for welding ofsteel pipelines on land andoffshorePart 1: Carbon and carbon manganesesteel pipelines BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials BS 4872-1-1982 不要求批准焊接程序的焊工考试规范.第1部分:钢熔焊 Specification for approval testing of welders when welding procedure approval is not required - Fusion welding of steel BS 4872-2-1976 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys BS 499-1 Supplement-1992 焊接术语与符号.补充.电焊设备的定义 Welding terms and symbols - Supplement - Definitions for electric welding equipment BS 499-1-2009 焊接术语和符号.焊接、钎焊和热切割用术语表 Welding terms and symbolsPart 1: Glossary for welding, brazing andthermal cutting BS 499-2C-1999 焊接术语与符号.图表形式的的欧洲电弧焊符号 Welding terms and symbols - European arc welding symbols in chart form BS 4T 45-1972 碳-锰钢管材规格(700 N/mm)(管外径大于或等于12.5mm)(可焊接) Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) BS 5950-2-2001 建筑物中结构用的钢制件.材料、制造和装配规范.轧制及焊接型材 Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections BS 5S 21-1964 飞机材料规范.20号碳钢(适用于焊接)(25/35吨力/平方英寸:最大直径或最小断面尺寸6英寸) Specification for aircraft material - 20 carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension) BS 638-4-1996 电弧焊电源、设备和附件.第4部分:焊接电缆规范 Arc welding power sources, equipment and accessories - Specification for welding cables BS 6942-2-1989 氧燃料气体焊接和相关工艺用成套小型工具的设计和建造.第2部分:使用可充氧气和燃气容器的成套工具规范 Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas BS 6990-1989 含有工艺流体或其残留物的钢管焊接实用规程 Code of practice for welding on steel pipes containing process fluids or their residuals BS 7122-1989 液化气体道路运输用的焊接钢槽车规范 Specification for welded steel tanks for the road transport of liquefiable gases BS 7363-1990 焊接用受控热强度试验和叠珠焊缝板试验方法 Method for bead-on-plate (BOP) test for welds BS 7372-3-1993 工业金属丝筛网和金属丝编织布孔径和丝径组合选择指南.第3部分:预压接或压力焊接金属丝筛网的优选组合 Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire screens BS 7448-2-1997 断裂机械韧性试验.第2部分:金属材料焊接的KDOWNIDOWNc值、临界CTOD值和临界J值的测定方法 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials BS 7655-2.4-2000 电缆用绝缘和铠装材料规范.横向耦合弹性铠装化合物.焊接电缆包敷物 Specification for insulating and sheathing materials for cables - Cross-linked elastomeric sheathing compounds - Welding cable covering BS 7670-2-1997 电阻凸焊的钢螺母和螺栓.焊接螺母和螺栓的焊接规范 Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts BS 8451-2004 气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范 Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification BS 855-1990 集中供热和间接热水供应用焊接钢锅炉(额定输出44KW至3MW)规范 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW) BS 91-1998 电缆焊接插座.规范 Electric cable soldering sockets - Specification BS 9210 N0009-1-1978 射频连接器(SMC系列)详细规范.不密封、焊接、静态接触、50、螺纹连接.全面评定级 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 $2I, screw coupling - Full assessment level BS 9210 N0009-2-1978 射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50、螺纹连接.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information BS 9210 N001-1-1975 射频连接器(BNC型)的详细规范.50的密封、焊接、静态接触.全面评定级 Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level BS 9210 N007-1-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50、插入式连接.全面评定级 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment level BS 9210 N007-2-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50、连接扣.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information BS 9612 N016-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.820MHz和3.030MHz频率范围.宽温范 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level BS 9612 N017-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.820MHz和3.030MHz频率范围.窄温范 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level BS DD CEN ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的试验室方法.通过完全或部分有机材料组成的产品焊接或切割时所 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials BS DD CEN ISO/TS 17845-2004 焊接和相关程序.缺陷的名称与符号系统 Welding and allied processes - Designation system for imperfections BS DD CEN/TS 14751-2004 焊接.焊接检验用飞行时间衍射技术(TOFD)的使用 Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds BS DD ENV 10080-1996 混凝土加强筋用钢.可焊肋状钢筋 B500.棒材、卷材和焊接钢筋网的交付技术状态 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B500 - Technical delivery conditions for bars, coils and welded fabric BS EN 10025-3-2004 结构钢热轧制品.正火/正火热机轧制的可焊接细粒结构钢的交货技术条件 Hot rolled products of structural steels - Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels BS EN 10025-4-2004 结构钢热轧制品.热机轧制的可焊接细粒结构钢的交货技术条件 Hot rolled products of structural steels - Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels BS EN 10028-6-2009 压力容器用钢制扁平产品.可焊接淬火和回火细粒钢 Flat products made of steels for pressure purposes - Part 6:Weldable fine grain steels, quenched and tempered BS EN 10080-2005 混凝土增强用钢.可焊接增强钢.总则 Steel for the reinforcement of concrete - Weldable reinforcing steel - General BS EN 1011-1-2009 焊接.金属材料焊接用推荐规程.弧焊用一般指南 Welding - Recommendations for welding of metallic materials - General guidance for arc welding BS EN 1011-2-2001 焊接.金属材料焊接的推荐规范.铁素体钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels BS EN 1011-3-2000 焊接.金属材料焊接的推荐规范.不锈钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels BS EN 1011-4-2000 焊接.金属材料焊接的推荐规范.铝及铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys BS EN 1011-5-2003 焊接.金属材料焊接的推荐规程.覆层钢的焊接 Welding - Recommendations for welding of metallic materials - Welding of clad steel BS EN 1011-6-2005 焊接.金属材料焊接的建议.第6部分:激光束焊接 Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding BS EN 1011-7-2004 焊接.金属材料焊接的推荐规范.电子束焊 Welding - Recommendations for welding of metallic materials - Electron beam welding BS EN 1011-8-2004 焊接.金属材料焊接的推荐规范.铸铁的焊接 Welding - Recommendations for welding of metallic materials - Welding of cast irons BS EN 10120-2008 焊接的储气瓶用钢薄板材和带材 Steel sheet and strip for welded gas cylinders BS EN 10217-1-2002 承压用焊接钢管.交付技术状态.规定室温特性的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties BS EN 10217-2-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties BS EN 10217-3-2002 承压用的焊接钢管.交付技术状态.合金细晶粒钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes BS EN 10217-4-2002 承压用的焊接钢管.交付技术状态.规定了低温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties BS EN 10217-5-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties BS EN 10217-6-2002 承压用的焊接钢管.交付技术条件.规定了低温特性的非合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties BS EN 10217-7-2005 压力用途焊接钢管.交货技术条件.不锈钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes BS EN 10219-1-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.交货技术要求 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements BS EN 10219-2-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.公差、尺寸和局部特性 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties BS EN 10220-2002 无缝和焊接钢管.尺寸和每单位长度的质量 Seamless and welded steel tubes - Dimensions and masses per unit length BS EN 10222-4-1999 压力容器用钢锻件.具有高验收强度的可焊接细晶粒钢 Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength BS EN 10223-4-1998 栅栏用钢丝和钢丝制品.钢丝焊接网式栅栏 Steel wire and wire products for fences - Steel wire welded mesh fencing BS EN 10223-7-2002 栏栅用钢丝和金属丝制品.栏栅用钢丝焊接网板 Steel wire and wire products for fences - Steel wire welded panels - For fencing BS EN 10225-2009 固定近海结构的可焊接结构钢.技术提交条件 Weldable structural steels for fixed offshore structures - Technical delivery conditions BS EN 10246-1-1996 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness BS EN 10246-11-2000 钢管的无损检验.对无缝和焊接钢管进行液体渗透试验以检测其表面缺陷 Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections BS EN 10246-12-2000 钢管的无损检验.对无缝和焊接铁磁钢管进行磁粉检验以检测其表面缺陷 Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections BS EN 10246-13-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes BS EN 10246-14-2000 钢管的无损检验.层状缺陷探测用无缝和焊接(埋弧焊接除外)钢管的自动超声波检验 Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections BS EN 10246-15-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测 Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections BS EN 10246-16-2000 钢管的无损检验.对焊接钢管焊缝临近区域进行自动超声波检验以检测其层状缺陷 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections BS EN 10246-17-2000 钢管的无损检验.对无缝和焊接钢管管端部进行超声波检验以检测其层状缺陷 Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections BS EN 10246-18-2000 钢管的无损检验.对无缝和焊接铁磁钢管管端部进行磁粉检验以检测其层状缺陷 Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections BS EN 10246-2-2000 钢管的无损检验.验证水密封性能用的无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness BS EN 10246-3-2000 钢管的无损检验.缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流检验 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections BS EN 10246-5-2000 钢管的无损检验.纵向缺陷探测用无缝和焊接(埋弧焊除外)的铁磁性钢管的自动全周界磁力换能器/磁力线渗漏检验 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections BS EN 10246-7-2005 钢管的无损检验.纵向缺陷探测用无缝焊接钢管(埋弧焊除外)的自动全周界超声波检验 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections BS EN 10246-9-2000 钢管的无损检验.检测纵向或横向缺陷用的焊接和埋弧焊钢管的自动超声波试验 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections BS EN 10255-2004 焊接或加螺纹的非合金钢管.交货技术条件 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions BS EN 10296-1-2003 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes BS EN 10296-2-2005 机械和一般工程用焊接圆钢管.技术交货条件.不锈钢 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel BS EN 10305-2-2010 精密仪器用钢管.交货技术条件.焊接冷拔钢管 Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes BS EN 10305-3-2010 精密仪器用钢管.交货技术条件.焊接冷精加工钢管 Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes BS EN 10305-5-2010 精密设备用钢管.交货技术条件.焊接和冷精加工的方形及矩形钢管 Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubes BS EN 10305-6-2005 精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材 Steel tubes forprecisionapplications Technical deliveryconditions Part 6: Welded cold drawn tubes forhydraulic and pneumatic powersystems BS