常用矩阵232控制代码.doc

EXTRON SMS series9600 N 8 1 直通线1 to 1 00*01*01! 2 to 3 00*02*03!KARMER series9600 N 8 1 交叉线1 to 1 x01x81x81x812 to 3 x01x82x83x8110 to 8 x01x8Ax88x81Sierravideo pro XL 16系列v59600 N 8 1直通线Sierravideo pro XL 32系列v59600 N 8 1直通线RS-232PC RTR2 RX 2 TX3 TX 3 RX5 GND 1 & 9 GND*Y1,1!r*Y3,2!r“Y” Command- All LevelsThe “Y” command switches all levels (i.e. video and audio).For example;*Y2,8!This string says that input 8 is to be connected to output 2 on all levels.“X” Command- Specify LevelsUsing the “X” command requires that a level is specified.For example;*X8, 3, 2!This string says that a connection is to be made between output 8 and input 3 on level 2. If a levelnumber of “0” is used, all levels are switched.“V” Command- Connect LevelsThe “V” command is followed by an output number, a comma, and an input number for eachlevel, up to the number of levels on the router.For example;*V12, 7, 8, 9!This string says that connections are to be made to output 12 from input 7 on level 1, input 8 onlevel 2, and input 9 on level 3.Unless otherwise specified at the time of order, the V5S series of routing switchers are configuredat the factory with 7 levels of control as indicated by the chart below.Level # Type1 R2 G3 B4 H Sync5 V Sync6 Audio 17 Audio 2Network SDI matrix19200 N 8 1 直通线1 to 1 xA0x00x002 to 3 xA0x02x014 to 11 xA0x0Ax03CREATOR直通线9600 N 8 11B1.1B2.1B3.2B1.2B2.EVZ 视频矩阵19200 N 8 1 直通线视频1 TO 1 xA0x01x0Ax02x00x00x0Dx0D1 TO 2 xA0x01x0Ax02x00x01x0Ex0D2 TO 1 xA0x01x0Ax02x01x00x0Ex0D2TO 4 xA0x01x0Ax02x01x03x11x0D2 TO 16 xA0x01x0Ax02x01x0Fx1Dx0DVGA矩阵VGA1TO1 xA0x01x0Cx02x00x00x0Fx0D1TO 2 xA0x01x0Cx02x00x01x10x0D2TO 4 xA0x01x0Cx02x01x03x13x0D2TO 16 xA0x01x0Cx02x01x0Fx1Fx0D音频1TO1 xA0x01x0