qlogic交换机端口激活.doc

Qlogic交换机端口激活Qlogic的端口激活过程和和博科的基本类似1 ）收集交换机的序列号2 ）登录qlogic的lincese申请网站填入申请授权，生成激活licnese3 ）把生成的licnese填入交换机然后enable端口首先第一步收集交换机的序列号交换机的序列号可以通过三种方式取得1） 交换机上贴的标签2） 交换机web管理界面3） 交换机telnet登录界面为了准确期间统一要求申请license的时候用交换机的web界面或者telnet界面来取得交换机的序列号Web界面方法如下如登录交换机的管理ip默认ip /用户名admin密码password，web界面需要java的支持，下图中标注红色的为序列号或者通过telnet 方式登录输入登录密码登陆后会自动显示提示屏里面的SerialNumber即是，或者是命令行输入show verison结果也会显示SANbox # show version * * * * Command Line Interface SHell (CLISH) * * * * SystemDescription SANbox 5600 FC Switch EthNetworkAddress (use set setup system to update) MACAddress 00c0dd192b88 WorldWideName 10:00:00:c0:dd:19:2b:88 SerialNumber 1020L00455 SymbolicName SANbox ActiveSWVersion V.0 ActiveTimestamp Thu Sep 20 21:28:03 2007 DiagnosticsStatus Passed LicensedPorts 8 SwitchMode Full Fabric第二步 取得授权，授权纸如下图，根据授权纸找到授权码，下图中圈红色的部分即为授权码然后登录qlogic的申请license网站/LicenseKeyActivationCenter/UI/SerialNumber.aspx打开申请页面输入交换机的序列号点击继续后会显示此序列号已经具有的特性，此交换机共有20个端口其中8个端口已经激活然后选择active licnese key点击继续填入email地址，激活完毕后网站会自动发送licnese到邮箱输入email完毕后点击继续填一下联系人信息点击下一步输入授权码，此文档需要激活8个端口，每个授权可以激活4个因此需要选择add more填写了两个授权，点击下一步会让确认填写信息的准确与否确认没问题选择yes到下一步要求接受许可进入下一步即可取得license下图标红色部分，同时系统也会自动发送一封邮件到填入的邮箱自动发送的邮件内容如下You have purchased a software upgrade for your QLogic Fibre Channel Switch. To enable this software feature on your product, you must load the license key into the unit. License Key: 2-LCIDDBZM6Z3Z2Date Issued: 9/29/2010Product Licenses are issued for: SB5600Q-08ABase Item Serial #: 1020L00455Complete the following steps to apply the license key to your switch.Important Note: If running switch firmware version 4.1 or older, the switch will need to be reset as part of this upgrade!Command Line Interface Instructions:1. Log into the SANbox 5600 series Fibre Channel switch Command Line Interface via telnet, ssh, or the serial console. 2. Enter the CLI command admin start. 3. Enter the CLI command feature add license_key. license_key is the key located at the top of this email. 4. To list the licenses installed on the SANbox 5600 series Fibre Channel switch, enter the CLI command log. Enterprise Fabric Suite or QuickTools (or legacy SANsurfer Switch Manager) Instructions: 1. From the switch Faceplate view, left click the Switch pull down menu and select Features 2. From the Feature Licenses dialog, select Add 3. Enter the Authorization Code/License Key that is located at the top of this email 4. Select Add Key. The port upgrade will be enabled on the switch and Switch Licensed for X ports will appear in the Feature Licenses dialog5. Select Close to return to the Faceplate viewThe feature Authorization Code/License Key should now be activated. Please contact QLogic Technical Support for any issues or questions you may have with this license upgrade. QLogic Technical Support can be reached by the following methods:Web: Email: 第三部，把激活码的填入交换机激活端口登录交换机web界面，选择switch选项中的features选项在出现的对话框中输入licens