oracle的PLSQL编程之过程全部案例.docx

- 声明游标；CURSOR cursor_name IS select_statement-For 循环游标-（1）定义游标-（2）定义游标变量-（3）使用for循环来使用这个游标declare -类型定义 cursor c_job is select empno,ename,job,sal from emp where job=MANAGER; -定义一个游标变量v_cinfo c_emp%ROWTYPE ，该类型为游标c_emp中的一行数据类型 c_row c_job%rowtype;begin for c_row in c_job loop dbms_output.put_line(c_row.empno|-|c_row.ename|-|c_row.job|-|c_row.sal); end loop;end; -Fetch游标-使用的时候必须要明确的打开和关闭declare -类型定义 cursor c_job is select empno,ename,job,sal from emp where job=MANAGER; -定义一个游标变量 c_row c_job%rowtype;begin open c_job; loop -提取一行数据到c_row fetch c_job into c_row; -判读是否提取到值，没取到值就退出 -取到值c_job%notfound 是false -取不到值c_job%notfound 是true exit when c_job%notfound; dbms_output.put_line(c_row.empno|-|c_row.ename|-|c_row.job|-|c_row.sal); end loop; -关闭游标 close c_job;end;-1：任意执行一个update操作，用隐式游标sql的属性%found,%notfound,%rowcount,%isopen观察update语句的执行情况。 begin update emp set ENAME=ALEARK WHERE EMPNO=7469; if sql%isopen then dbms_output.put_line(Openging); else dbms_output.put_line(closing); end if; if sql%found then dbms_output.put_line(游标指向了有效行);-判断游标是否指向有效行 else dbms_output.put_line(Sorry); end if; if sql%notfound then dbms_output.put_line(Also Sorry); else dbms_output.put_line(Haha); end if; dbms_output.put_line(sql%rowcount); exception when no_data_found then dbms_output.put_line(Sorry No data); when too_many_rows then dbms_output.put_line(Too Many rows); end;declare empNumber emp.EMPNO%TYPE; empName emp.ENAME%TYPE; begin if sql%isopen then dbms_output.put_line(Cursor is opinging); else dbms_output.put_line(Cursor is Close); end if; if sql%notfound then dbms_output.put_line(No Value); else dbms_output.put_line(empNumber); end if; dbms_output.put_line(sql%rowcount); dbms_output.put_line(-); select EMPNO,ENAME into empNumber,empName from emp where EMPNO=7499; dbms_output.put_line(sql%rowcount); if sql%isopen then dbms_output.put_line(Cursor is opinging); else dbms_output.put_line(Cursor is Closing); end if; if sql%notfound then dbms_output.put_line(No Value); else dbms_output.put_line(empNumber); end if; exception when no_data_found then dbms_output.put_line(No Value); when too_many_rows then dbms_output.put_line(too many rows); end; -2,使用游标和loop循环来显示所有部门的名称-游标声明declare cursor csr_dept is -select语句 select DNAME from Depth; -指定行指针,这句话应该是指定和csr_dept行类型相同的变量 row_dept csr_dept%rowtype;begin -for循环 for row_dept in csr_dept loop dbms_output.put_line(部门名称:|row_dept.DNAME); end loop;end;-3,使用游标和while循环来显示所有部门的的地理位置（用%found属性）declare -游标声明 cursor csr_TestWhile is -select语句 select LOC from Depth; -指定行指针 row_loc csr_TestWhile%rowtype;begin -打开游标 open csr_TestWhile; -给第一行喂数据 fetch csr_TestWhile into row_loc; -测试是否有数据，并执行循环 while csr_TestWhile%found loop dbms_output.put_line(部门地点：|row_loc.LOC); -给下一行喂数据 fetch csr_TestWhile into row_loc; end loop; close csr_TestWhile;end; select * from emp -4,接收用户输入的部门编号，用for循环和游标，打印出此部门的所有雇员的所有信息(使用循环游标)-CURSOR cursor_name(parameter,parameter,.) IS select_statement;-定义参数的语法如下:Parameter_name IN data_type:=|DEFAULT value declare CURSOR c_dept(p_deptNo number) is select * from emp where emp.depno=p_deptNo; r_emp emp%rowtype;begin for r_emp in c_dept(20) loop dbms_output.put_line(员工号：|r_emp.EMPNO|员工名：|r_emp.ENAME|工资：|r_emp.SAL); end loop;end;select * from emp -5：向游标传递一个工种，显示此工种的所有雇员的所有信息(使用参数游标)declare cursor c_job(p_job nvarchar2) is select * from emp where JOB=p_job; r_job emp%rowtype;begin for r_job in c_job(CLERK) loop dbms_output.put_line(员工号|r_job.EMPNO| |员工姓名|r_job.ENAME); end loop;end;SELECT * FROM EMP-6：用更新游标来为雇员加佣金：(用if实现,创建一个与emp表一摸一样的emp1表，对emp1表进行修改操作),并将更新前后的数据输出出来 -/blog/815770 create table emp1 as select * from emp; declare cursor csr_Update is select * from emp1 for update OF SAL; empInfo csr_Update%rowtype; saleInfo emp1.SAL%TYPE;begin FOR empInfo IN csr_Update LOOP IF empInfo.SAL1500 THEN saleInfo:=empInfo.SAL*1.2; elsif empInfo.SAL2000 THEN saleInfo:=empInfo.SAL*1.5; elsif empInfo.SAL0 loop dbms_output.put_line(员工姓名：|r_testComput.ENAME| 工作时间：|r_testComput.HIREDATE); -计速器减一 top_two:=top_two-1; FETCH crs_testComput INTO r_testComput; end loop; close crs_testComput;end; -10：编写一个PL/SQL程序块，对所有雇员按他们的基本薪水(sal)的20%为他们加薪，-如果增加的薪水大于300就取消加薪(对emp1表进行修改操作，并将更新前后的数据输出出来) declare cursor crs_UpadateSal is select * from emp1 for update of SAL; r_UpdateSal crs_UpadateSal%rowtype; salAdd emp1.sal%type; salInfo emp1.sal%type;begin for r_UpdateSal in crs_UpadateSal loop salAdd:= r_UpdateSal.SAL*0.2; if salAdd300 then salInfo:=r_UpdateSal.SAL; dbms_output.put_line(r_UpdateSal.ENAME|: 加薪失败。|薪水维持在：|r_UpdateSal.SAL); else salInfo:=r_UpdateSal.SAL+salAdd; dbms_output.put_line(r_UpdateSal.ENAME|: 加薪成功.|薪水变为：|salInfo); end if; update emp1 set SAL=salInfo where current of crs_UpadateSal; end loop;end; -11:将每位员工工作了多少年零多少月零多少天输出出来 -近似 -CEIL(n)函数：取大于等于数值n的最小整数 -FLOOR(n)函数：取小于等于数值n的最大整数 -truc的用法 /2005/1028/20051028034101.shtmldeclare cursor crs_WorkDay is select ENAME,HIREDATE, trunc(months_between(sysdate, hiredate) / 12) AS SPANDYEARS, trunc(mod(months_between(sysdate, hiredate), 12) AS months, trunc(mod(mod(sysdate - hiredate, 365), 12) as days from emp1; r_WorkDay crs_WorkDay%rowtype;begin for r_WorkDay in crs_WorkDay loop dbms_output.put_line(r_WorkDay.ENAME|已经工作了|r_WorkDay.SPANDYEARS|年,零|r_WorkDay.months|月,零|r_WorkDay.days|天); end loop;end; -12:输入部门编号，按照下列加薪比例执行(用CASE实现，创建一个emp1表，修改emp1表的数据),并将更新前后的数据输出出来- deptno raise(%)- 10 5%- 20 10%- 30 15%- 40 20%- 加薪比例以现有的sal为标准-CASE expr WHEN comparison_expr THEN return_expr-, WHEN comparison_expr THEN return_expr. ELSE else_expr ENDdeclare cursor crs_caseTest is select * from emp1 for update of SAL; r_caseTest crs_caseTest%rowtype; salInfo emp1.sal%type; begin for r_caseTest in crs_caseTest loop case when r_caseTest.DEPNO=10 THEN salInfo:=r_caseTest.SAL*1.05; when r_caseTest.DEPNO=20 THEN salInfo:=r_caseTest.SAL*1.1; when r_caseTest.DEPNO=30 THEN salInfo:=r_caseTest.SAL*1.15; when r_caseTest.DEPNO=40 THEN salInfo:=r_caseTest.SAL*1.2; end case; update emp1 set SAL=salInfo where current of crs_caseTest; end lo