QT-00054Ver1.0 ERSA回流焊炉操作指引 - Copy.doc

SUZHOUersa回流焊炉操作指引ersa reflow oven workstation instruction信息分类： 三阶文件文件编号: QT-00054版本:1.0页码:3 of 31.Product Revision 产品版本Product Name产品名称Applicable Product BOM Revision适用的产品BOM版本N/AN/A2.Change history更改记录Updated Ver.最新版本Effective date 生效日期Prepared by起草人Brief of Amendments更改内容摘要1.0ZhuyongxingNew Issue3.Purpose目的To make sure the operators operate the ERSA reflow oven correctly.保证回流炉工位员工正确操作埃莎回流焊炉。4.Scope范围 Apply to all the employees in ERSA reflow oven station in Enics(Suzhou). 适用于所有艾尼克斯（苏州）的回流焊工位操作员工。5.Definitions定义 N/A无6.Responsibilities职责 N/A无7.Description描述7.1 Power on the machine, then power on the computer, press ersasoft打开机器电源开关及电脑开关，在电脑上点击ersasoft7.2 Load the correct program according to the product checklist.根据产品指向标选择正确的程序。7.3 Notice注意事项7.3.1 Before the PCB get into the reflow machine,the actual every area tmperature must arrive the setting temperature必须等炉子每个温区到达设定温度才可以进板7.3.2 Any machine error, please contact shift leader or engineer.如发生任何异常，应立即通知领班或工程师 8.Safety and Environmental Requirements安全和环境要求 8.1 Please dont put hand and other parts into the equipment, in order to avoid damage. 请不要将手和其他部位伸入设备中，以免发生伤害。 8.2 Note reflow oven equipment temperature logo area, in order to avoid burns.注意回流炉设备温标识区域，以免发生烫伤。8.3 Such as the emergency, please press the emergency stop button.如遇到紧急情况，请按下紧急停止开关按钮。9