metron资料.doc

Products5 - axis HSC - Milling machines |Patented machine concept| HSC - 5 - axis - simultaneous milling Direct milling of molds from sandDiemaking and toolmaking (aluminium, steel, gray cast iron)ModelmakingMilling of plasticsspecific adjustment to the requested work space|METROM P800 M|Diemaking and toolmaking|METROM P2000|Direct milling of molds from sandFurther:Customized programming of controls, in particular numerical control controls for parallel kinematic machines Controls for hydraulic drive systems METROM P800 Mworking spacecircular table: z - axis: swivel angle A: circular angle C: 800 mm 450 mm 90 deg no limit dynamicsacceleration: velocity: 12 m/s 60 m/min accuracy:repeating accuracy: 0.003 mm building area2.300mm x 2.000mm x 2.500mm mass4.5 t METROM P2000 working spacecircular table: z - axis: swivel angle A: circular angle C: 2800 mm 600 mm 90 deg no limit Dynamikacceleration: velocity: 10 m/s 60 m/min accuracyrepeating accuracy: 0.010 mm mass4.5 t Patented machine conceptKinematics5 axis cinematic (pentapod) circular table with direct drive 5 axis milling high productivity by high dynamics large working space with small building area swivel angle 90 deg G-Code programming without PKM-specific restrictions patented kinematics Main spindleHSK 6324,000 rpm14 kWHSK 63/5024,000 rpm30 kw / 40 NmSK 4015,000 rpm25 kw / 80 NmControlandronic 2000 - high performance CNC additional parallel kinematic processor NC cycle time = 1 ms (optional 0.5 ms) comfortable look ahead functions real time kinematic supervision PortraitThe companyMechatronische Maschinen GmbHwas founded in 2001 by Dr. Michael SchwaarThe companies main tasks are Construction,Design,Fabrication,Salesand start-up of mechatronic machine systems, in particular on the basis of parallel kinematics, as well as their control programming, process adjustment and service, furthermore engineering and research. We use a patented machine concept.Our team consi