摩托罗拉PCU日常维护命令.doc

摩托罗拉日常维护命令MOTOROLA 的PCU在物理上和维护时被看作BSC下的一个站。它的database也是从BSC上灌下去。BSC数据备份时同时也把PCU的数据备份。这种设计的好处是对现网影响不大，不会和BSC争夺KSW , CPU 等资源。PCU的日常维护过程上大体和BSC 一样。只是有些命令和查看的内容不同。1. 性能观察命令.1 disp_cell_status 观察GPRS 的PDCH的性能。通过察看有无占用PDCH，PDCH是否来判断PCU总体状况。MMI-RAM 0115 - disp_cell_s 2Start of report for LOCATION 2:GSM CELL IDMCC 460MNC 00LAC 1 (0001h)CI 1 (0001h)RAC 1 (0001h)Frequency Type PGSMBCCH Frequency 76Status UnbarredGPRS Status UnbarredReset in Prog NoGPRS Reset in Prog NoSPI in Prog NoBSS BSSAP Prhb NAMSC BSSAP Prhb NASPI/MSC SCCP Prhb NAAccClass Bar NoneGPRS AccClass Bar 4 Full Power Mode OFFExt Range Mode OFF FREE INUSE UNAVL - - -SDCCH 8 0 0 Norm Outer TCH/F 2 0 0 Norm Inner TCH/F 0 0 0 Ext Outer TCH/F 0 0 0 PD CHANNEL 4 0 0 End of Report. .2 state pcuwhatch the toatal status of hardware and function , including dproc , MSI , MMS , GDS , GSL，GBL Usage of this command : 借助于硬件的复位时间，可以判断的硬件是否重启过 。MMI-RAM 0216 - state pcuDEVICE STATUS INFORMATION FOR LOCATION PCU:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped S:Shutdown Last Transition RelatedDevice State Reason dd/mm hh:mm:ss Function- - - - -CAB 0 0 0 B-U NO REASON 15/12 21:33:49 NoneCAGE 0 0 0 B-U NO REASON 15/12 21:34:08 NonePSP 0 0 0 B-U NO REASON 15/12 21:33:51 NoneDPROC 1 0 0 B-U NO REASON 15/12 21:33:56 NoneDPROC 2 0 0 B-U NO REASON 15/12 21:33:58 NoneDPROC 5 0 0 B-U NO REASON 15/12 21:34:26 NoneMSI 0 0 0 B-U NO REASON 15/12 21:33:59 NoneMSI 1 0 0 B-U NO REASON 15/12 21:34:00 NoneMSI 2 0 0 B-U NO REASON 15/12 21:34:06 NoneMMS 0 0 0 B-U NO REASON 15/12 21:33:59 NoneMMS 0 1 0 D-U Synch Loss OOS Timer 15/12 21:33:59 NoneMMS 1 0 0 D-U Synch Loss OOS Timer 15/12 21:34:00 NoneMMS 1 1 0 D-U Synch Loss OOS Timer 18/12 15:24:52 NoneMMS 2 0 0 B-U NO REASON 18/12 07:11:06 NoneMMS 2 1 0 D-U Synch Loss OOS Timer 15/12 21:34:06 NoneGDS 0 0 0 B-U NO REASON 15/12 21:34:07 NoneGDS 1 0 0 B-U NO REASON 15/12 21:34:07 NoneGSL 0 0 0 B-U NO REASON 15/12 21:34:07 NoneGSL 1 0 0 B-U NO REASON 15/12 21:34:05 NoneGBL 0 0 0 B-U NO REASON 18/12 14:32:19 NoneFUNCTION STATUS INFORMATION FOR LOCATION PCU:OPER STATES: E:Enabled B:Busy ADMIN STATES: E:Equipped Last Transition RelatedFunction State Reason dd/mm hh:mm:ss Device- - - - -No functions were found based on criteria.END OF STATUS REPORT.3 disp_nsvc gbl 0显示所有和GBL 0相连的NSVC and DLCI。当激活GBL时，GBL 0的状态由OOS 变为Dead, 最后变为 Unblocked.MMI-RAM 0115 - disp_nsvc gbl 0Start of Report: NS Access Rate: 512GBL NS-VCI STATUS DLCI BC BE CIR - - - - - - - 0 16 Unblocked 16 512 512 512 End of Report.To get the state of the PCU in site 02. 硬件观察命令2.1 disp_processor pcu 此命令查看每块处理器板的类型（PRP or PICP ）, 以及它承载的function（GDS ,GSL, OR GBL）。 Dproc _ID 对应PCU 的槽位号，Gb , GDS-LAPD 只能配置在 PICP板上, 但可以在不同的 PMC端口上。 GDS-LAPD ，GDS-TRAU不能配置在相同的PMC。Usage of this command : 可以检查data base 里有没有把PRP or PICP承载的function做错。MMI-RAM 0115 - disp_p pcuPROCESSOR STATUS INFORMATION FOR LOCATION PCU:OPER STATES: D:Disabled E:Enabled B:BusyADMIN STATES: L:Locked U:Unlocked E:Equipped NE:Not EquippedNC: Not Connected Related RelatedCPU# Processor Name State Reason Device Function- - - - - -1107 PSP 0 0 B-U NO REASON N/A N/A1101 DPROC (PICP) 1 0 B-U NO REASON MSI 0 0 N/A GDS 0 0 N/A GSL 0 0 N/A GSL 1 0 N/A MSI 2 0 N/A GBL 0 0 N/A1102 DPROC (PICP) 2 0 B-U NO REASON MSI 1 0 N/A GDS 1 0 N/A (GDS 1 0) N/A1105 DPROC (PRP) 5 0 B-U NO REASON N/A N/AEND OF STATUS REPORT2.2 Disp-equip pcu 显示PCU里装配的所有硬件设备，此命令可以结合state pcu 命令来用。Display all devices equip of PCU or BTSMMI-RAM 0216 - disp_eq pcuMSI 0 0 0MSI 1 0 0MSI 3 0 0MMS 0 0 0MMS 0 1 0MMS 1 0 0MMS 1 1 0MMS 3 0 0MMS 3 1 0disp_ele nsei 0Show the NSEI on site 0disp_eq pcu gblShow the configuration of GBL(map with SGSN)MMI-RAM 0315 - eq pcu gblEnter the GBL identifier: 0Enter the 1st and 2nd MMS identifier: 3 1Enter the starting timeslot: 1Enter the ending timeslot: 31Enter the T391 timer: 10Enter the T392 timer: 15Enter the N391 counter: 6Enter the N392 counter: 3Enter the N393 counter: 4COMMAND ACCEPTEDdisp_eq pcu gds Show the detail information about GDSMMI-RAM 0315 - disp_eq pcu gds 0 The Unique GDS Identifier is: 0 The BSC MMS identifier is: 33 0 The PCU MMS identifier is: 0 0 The GDS type is: LAPDMMI-RAM 0315 - disp_eq pcu gds 1 The Unique GDS Identifier is: 1 The BSC MMS identifier is: 33 1 The PCU MMS identifier is: 1 0 The GDS type is: TRAUdisp_eq pcu msi