Openwrt里架设Lighttpd+PhP5+MYSQL环境标准教程.doc

Lighttpd+PhP5+MYSQL标准教程一：硬件准备路由一台，内存最少64m，推荐128m以上！优盘一个，不推荐多功能读卡器！二：软件准备刷好OPenwrt系统，挂载好优盘并且确保识别为/mnt/sda1（需要扩展系统的提前准 备 好）(一般的系统都会默认自动挂载到/mnt/sda1下面,教程以此为基础)三：GO-安装web服务程序和php程序1,更新和安装组件opkg update opkg install lighttpd-mod-fastcgi lighttpd-mod-access lighttpd-mod-alias lighttpd-mod-redirect lighttpd-mod-rewrite opkg install php5-fastcgi php5-mod-gd php5-mod-xml php5-mod-ctype php5-mod-session php5-mod-sockets php5-mod-tokenizeropkg install php5-mod-mcrypt php5-mod-mbstring php5-mod-pdo php5-mod-curl lighttpd-mod-evasive2,建立/mnt/sda1/web 3,修改lighttpg.conf 文件相应信息 server.modules = ( mod_alias, mod_access, mod_evasive, mod_rewrite, mod_redirect, mod_fastcgi) server.document-root = /mnt/sda1/web/ server.errorlog = /var/log/lighttpd/error.logserver.port = 88 s = ( index.php, index.html,default.html, index.htm, default.htm ) fastcgi.server= ( .php =( localhost =(socket = /tmp/php-fastcgi.socket, bin-path = /usr/bin/php-fcgi,max-procs = 2,bin-environment = (PHP_FCGI_CHILDREN = 3,PHP_FCGI_MAX_REQUESTS = 100 ) ) ) )evasive.max-conns-per-ip =6 4,修改php.ini文件相应信息如下: short_open_tag = Onerror_log = /var/log/php_errors.logfile_uploads = Onupload_tmp_dir = /tmp upload_max_filesize = 20M max_file_uploads = 200 doc_root = /mnt/sda1/web extension=curl.soextension=mbstring.soextension=mcrypt.soextension=pdo.soextension=pdo-mysql.soextension=mysql.soextension=gd.soextension=session.soextension=sockets.soextension=tokenizer.soextension=xml.soextension=xmlreader.soextension=xmlwriter.sodate.timezone = prcmysql.default_socket = /var/run/mysqld.socksession.auto_start = 15,重启路由安装数据库过程及配置1,安装mysql数据库组件 opkg update opkg install libncurses mysql-server libsqlite3 php5-mod-mysql 2，建立文件和文件夹,权限全部为777 /mnt/sda1/web /mnt/sda1/data/mnt/sda1/data/mysql/mnt/sda1/data/tmp/bin/hostname3，/etc/f ;修改datadir= /mnt/sda1/data/mysql/tmpdir= /mnt/sda1/data/tmp/4,建立数据库 /usr/bin/mysql_install_db -force/etc/init.d/mysqld startmysqlquitmysqladmin -u root password 00000000;这里设置用户root的密码为000000005,手动建立一个用户和数据库mysql -u root -p insert into mysql.user(Host,User,Password) values(localhost,bbs,password(12345678);flush privileges; create database bbsdb;grant all privileges on bbsdb.* to bbslocalhost identified by 12345678;flush privileges;quit;6，如果想远程访问数据库 将f中的”bind-address = “注释掉grant all privileges on *.* to identified by passwd;flush privileges;把网站的启动加入启动文件启动在/etc/rc.local文件加入如下命令/etc/init.d/mysqld start /etc/init