欧盟LVD指令新协调标准.docx_第1页
欧盟LVD指令新协调标准.docx_第2页
欧盟LVD指令新协调标准.docx_第3页
欧盟LVD指令新协调标准.docx_第4页
欧盟LVD指令新协调标准.docx_第5页
已阅读5页,还剩5页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

欧盟LVD指令新协调标准清单2014年5月16日,欧盟在官方公布了原LVD指令(2006/95/EC)新的协调标准清单(OJ C 149, 16.5.2014, p. 33141)。其中2013年出版的协调标准如下表所示。我们可以看出EN 50117“同轴电缆”(Coaxial cables)和EN 50288“用于模拟和数字通信及控制的多元件金属电缆”(Multi-element metallic cables used in analogue and digital communication and control)系列标准有大批量更新。天津证威提醒您,关注欧盟LVD新协调标准,随时调整您的产品,适应欧盟新要求。 表中第四栏的“DOC”为“被替代标准的推断符合性中止期”:对于新版标准,到达该日期,被替代标准(旧版标准)及其增补件将不再具有推断符合性;对于标准的增补件,达到该日期,标准必须与此增补件一起使用,才具有推断符合性。我们从表中也可以看出,在欧盟,一般新标准与旧标准的过渡期为三年,譬如2013年发布的标准,其执行日期通常为2016年。标准编号标准名称采用国际标准DOCEN ISO 11252:2013Lasers and laser-related equipment Laser device Minimum requirements for documentationISO 11252:2013EN 50085-1:2005/A1:2013Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements2016-05-20EN 50117-1:2002/A2:2013Coaxial cables Part 1: Generic specification2016-06-17EN 50117-2-1:2005/A2:2013Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz - 1 000 MHz2016-07-01EN 50117-2-2:2004/A2:2013Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks Outdoor drop cables for systems operating at 5 MHz -1 000 MHz2016-07-01EN 50117-2-3:2004/A2:2013Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz2016-07-01EN 50117-2-4:2004/A2:2013Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz -3 000 MHz2016-07-01EN 50117-2-5:2004/A2:2013Coaxial cables Part 2-5: Sectional specification for cables used in cabled distribution networks Outdoor drop cables for systems operating at 5 MHz -3 000 MHz2016-07-01EN 50117-4-1:2008/A1:2013Coaxial cables Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 Indoor drop cables for systems operating at 5 MHz - 3 000 MHz2016-06-17EN 50288-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 1: Generic specification2016-03-18EN 50288-2-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 2-1: Sectional specification for screened cables characterised up to 100 MHz Horizontal and building backbone cables2016-03-18EN 50288-2-2:2013Multi-element metallic cables used in analogue and digital communication and control Part 2-2: Sectional specification for screened cables characterised up to 100 MHz Work area and patch cord cables2016-03-18EN 50288-3-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz Horizontal and building backbone cables2016-03-18EN 50288-3-2:2013Multi-element metallic cables used in analogue and digital communication and control Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz Work area and patch cord cables2016-03-18EN 50288-4-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification for screened cables characterised up to 600 MHz Horizontal and building backbone cables2016-03-18EN 50288-4-2:2013Multi-element metallic cables used in analogue and digital communication and control Part 4-2: Sectional specification for screened cables characterised up to 600 MHz Work area and patch cord cables2016-03-18EN 50288-5-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 5-1: Sectional specification for screened cables characterized up to 250 MHz Horizontal and building backbone cables2016-03-18EN 50288-5-2:2013Multi-element metallic cables used in analogue and digital communication and control Part 5-2: Sectional specification for screened cables characterized up to 250 MHz Work area and patch cord cables2016-03-18EN 50288-6-1:2013Multi-element metallic cables used in analogue and digital communication and control Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz Horizontal and building backbone cables2016-03-18EN 50288-6-2:2013Multi-element metallic cables used in analogue and digital communication and control Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz Work area and patch cord cables2016-03-18EN 50290-2-23:2013Communication cables Part 2-23: Common design rules and construction Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables2016-09-16EN 50290-2-25:2013Communication cables Part 2-23: Common design rules and construction Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables2016-09-16EN 60061-1:1993/A49:2013Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp capsIEC 60061-1:1969/A49:20132016-04-02EN 60061-2:1993/A46:2013Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps Part 2: LampholdersIEC 60061-2:1969/A46:20132016-04-02EN 60061-3:1993/A47:2013Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps Part 3: GaugesIEC 60061-3:1969/A47:20132016-04-02EN 60127-4:2005/A2:2013Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount typesIEC 60127-4:2005/A2:20122016-01-11EN 60127-7:2013Miniature fuses Part 7: Miniature fuse-links for special applicationsIEC 60127-7:2013EN 60143-2:2013Series capacitors for power systems Part 2: Protective equipment for series capacitor banksIEC 60143-2:20122016-01-15EN 60252-1:2011/A1:2013AC motor capacitors Part 1: General Performance, testing and rating Safety requirements Guidance for installation and operationIEC 60252-1:2010/A1:20132016-10-03EN 60252-2:2011/A1:2013AC motor capacitors Part 2: Motor start capacitorsIEC 60252-2:2010/A1:20132016-10-03EN 60335-2-2:2010/A1:2013Household and similar electrical appliances Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliancesIEC 60335-2-2:2009/A1:20122015-12-20EN 60335-2-6:2003/A13:2013Household and similar electrical appliances Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances2015-11-20EN 60335-2-7:2010/A1:2013Household and similar electrical appliances Safety Part 2-7: Particular requirements for washing machinesIEC 60335-2-7:2008/A1:2011 (Modified)2015-11-20EN 60335-2-17:2013Household and similar electrical appliances Safety Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliancesIEC 60335-2-17:20122015-04-30EN 60335-2-27:2013Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiationIEC 60335-2-27:2009 (Modified)2014-11-21EN 60335-2-34:2013Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressorsIEC 60335-2-34:20122015-06-27EN 60432-3:2013Incandescent lamps Safety specifications Part 3: Tungsten-halogen lamps (non-vehicle)IEC 60432-3:20122015-08-08EN 60519-4:2013Safety in electroheating installations Part 4: Particular requirements for arc furnace installationsIEC 60519-4:20132016-07-24EN 60519-10:2013Safety in electroheating installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applicationsIEC 60519-10:20132016-03-29EN 60519-12:2013Safety in electroheating installations Part 12: Particular requirements for infrared electroheating installationsIEC 60519-12:2013EN 60529:1991/A2:2013Degrees of protection provided by enclosures (IP Code)IEC 60529:1989/A2:20132016-10-03EN 60598-2-8:2013Luminaires Part 2-8: Particular requirements HandlampsIEC 60598-2-8:20132016-06-03EN 60598-2-11:2013Luminaires Part 2-11: Particular requirements Aquarium luminairesIEC 60598-2-11:20132016-06-20EN 60598-2-12:2013Luminaires Part 2-12: Particular requirements Mains socket-outlet mounted nightlightsIEC 60598-2-12:20132016-06-03EN 60598-2-24:2013Luminaires Part 2-24: Particular requirements Luminaires with limited surface temperaturesIEC 60598-2-24:20132016-07-24EN 60670-1:2005/A1:2013Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirementsIEC 60670-1:2002/A1:2011 (Modified)2017-12-31EN 60670-24:2013Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipmentIEC 60670-24:2011 (Modified)EN 60688:2013Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signalsIEC 60688:2012EN 60695-2-10:2013Fire hazard testing Part 2-10: Glowing/hot-wire based test methods Glow-wire apparatus and common test procedureIEC 60695-2-10:2013EN 60695-11-10:2013Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methodsIEC 60695-11-10:20132016-06-25EN 60934:2001/A2:2013Circuit-breakers for equipment (CBE)IEC 60934:2000/A2:20132016-02-22EN 60947-2:2006/A2:2013Low-voltage switchgear and controlgear Part 2: Circuit-breakersIEC 60947-2:2006/A2:20132016-03-07EN 60947-5-5:1997/A11:2013Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function2015-12-03EN 60950-1:2006/A2:2013Information technology equipment Safety Part 1: General requirementsIEC 60950-1:2005/A2:2013 (Modified)2016-07-02EN 60968:2013Self-ballasted lamps for general lighting services Safety requirementsIEC 60968:20122015-10-31EN 60974-2:2013Arc welding equipment Part 2: Liquid cooling systemsIEC 60974-2:20132016-02-28EN 60974-5:2013Arc welding equipment Part 5: Wire feedersIEC 60974-5:20132016-06-27EN 60974-7:2013Arc welding equipment Part 7: TorchesIEC 60974-7:20132016-02-28EN 61010-2-201:2013Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-201: Particular requirements for control equipmentIEC 61010-2-201:20132016-04-01EN 61034-2:2005/A1:2013Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirementsIEC 61034-2:2005/A1:20132016-05-26EN 61195:1999/A1:2013Double-capped fluorescent lamps Safety specificationsIEC 61195:1999/A1:20122015-11-16EN 61199:2011/A1:2013Single-capped fluorescent lamps Safety specificationsIEC 61199:2011/A1:20122015-11-01EN 61347-1:2008/A2:2013Lamp controlgear Part 1: General and safety requirementsIEC 61347-1:2007/A2:20122016-01-01EN 61347-2-9:2013Lamp controlgear Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)IEC 61347-2-9:20122015-12-04EN 61439-4:2013Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)IEC 61439-4:20122015-12-20EN 61535:2009/A1:2013Installation couplers intended for permanent connection in fixed installationsIEC 61535:2009/A1:20122015-06-20EN 61557-10:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measuresIEC 61557-10:20132016-06-03EN 61557-14:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 14: Equipment for testing the safety of electrical equipment of machineryIEC 61557-14:2013EN 61558-2-14:2013Safety of transformers, reactors, power supply units and combination thereof Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformersIEC 61558-2-14:2012EN 61558-2-16:2009/A1:2013Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply unitsIEC 61558-2-16:2009/A1:20132016-09-16EN 61558-2-26:2013Safety of transformers, reactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposesIEC 61558-2-26:2013EN 61643-21:2001/A2:2013Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks Performance requirements and testing methodsIEC 61643-21:2000/A2:20122015-08-31EN 61730-1:2007/A2:2013Photovoltaic (PV) module safety qualification Part 1: Requirements for constructionIEC 61730-1:2004/A2:20132016-04-18EN 62026-2:2013Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 2: Actuator sensor interface (AS-i)IEC 62026-2:2008 (Modified)EN 62026-7:2013Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 7: CompoNetIEC 62026-7:2010 (Modified)EN 6

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论