欧洲螺栓标准(EN bolt standards).doc

欧洲螺栓标准(EN bolt standards)ANSI|BS|DIN|EN|GB|ISO|JIS|NF|DIC编号中文名称英文名称EN 13411-5-2003钢丝绳终端设备 安全性 第5部分：U型螺栓丝夹Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope gripsEN 1450-1996+A1-1998塑料管道系统 玻璃增强热固塑料(GRP)组件 螺栓法兰连接的设计查验试验方法Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange jointsEN 1515-1-1999法兰和其连接件 螺栓连接 第1部分：螺栓连接的选择Flanges and their joints - Bolting - Part 1: Selection of boltingEN 1515-2-2001法兰和其连接件 螺栓连接 第2部分：PN钢法兰用螺栓材料的分类Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designatedEN 1665-1997+AC-1998六角法兰螺栓 重型系列Hexagon bolts with flange - Heavy seriesEN 20225-1991紧固件 螺栓、螺柱和螺母 尺寸代号和标注Fasteners; Bolts, screws, studs and nuts; Symbols and designation of dimensions (ISO 225:1983)EN 20273-1991紧固件 螺栓和螺钉用通孔Fasteners; Clearance holes for bolts and screws (ISO 273:1979)EN 20898-7-1995紧固件机械性能 第7部分：螺栓与螺钉的扭矩试验和最小扭矩公称直径1MM10MMMechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992)EN 2357-1988航空航天系列 操纵缆绳上锻制耐腐蚀钢柱头螺栓端 尺寸和负载Aerospace series - Stud-ends in corrosion resisting steel swaged on type, control cable - Dimensions and loadsEN 24015-1991六角头螺栓 产品等级B级 细杆(杆径近似等于中径)Hexagon head bolts; Product grade B; Reduced shank (shank diameter = pitch diameter) (ISO 4015:1979)EN 2413-1995航空航天系列 镀镉合金钢制肩薄六角头高精度公差柄短螺纹螺栓 分类：1100MPa(在环境温 度下)/235Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235EN 2549-1995航空航天系列阳极氧化MOS2润滑的钛合金制普通六角头紧公差标准柄短螺纹螺栓等级：1100MPa（环境温度）/Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315EN 2583-1997航空航天系列NI-PH2601(铬镍铁合金718)耐热镍基合金MJ螺纹螺栓等级：1275MPa( 环境温度)/650技术规Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 - Technical specificationEN 26157-1-1991紧固件 表面缺陷 第1部分：螺栓、螺钉和螺柱一般要求Fasteners; surface discontinuities; Part 1: Bolts, srews and studs for general requirements (ISO 6157-1:1988)EN 26157-3-1991紧固件 表面缺陷 第3部分：螺栓、螺钉和螺柱的特殊要求Fasteners; surface discontinuities; part 3: bolts, srews and studs for special requirements (ISO 6157-3:1988)EN 2859-1995航空航天系列镀镉合金钢制标准六角头紧公差普通柄短螺纹螺栓等级：1100 MPa (环境温度)/235Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235EN 2870-1996+AC-1996航空航天系列阳极氧化钛合金标准双六角头紧公差普通柄MoS2润滑的短螺纹螺栓等级：1100MPa(环境温度)/31Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315EN 2874-1996+AC-1996航空航天系列钝化、耐热镍基合金制双六角头紧公差普通柄中长螺纹螺栓等级：1550MPa(环境温度)/315Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315EN 28839-1991紧固件机械性能 有色金属制造螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)EN 2887-1995航空航天系列 钝化耐腐蚀钢标准六角头螺全纹头螺栓等级： 600 MPa( 环境温度)/425 Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 EN 2888-1995航空航天系列钝纯化耐腐蚀钢标准六角头紧公差普通柄短螺纹螺栓等级： 600 MPa(环境温度)/425 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425EN 2889-1995航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级：900MPa (环境温度)/235Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 EN 2925-1994航空航天系列FE-PA92HT(A286)耐高温钢制长螺纹细柄双六角头螺栓等级：900MPa(环境温度)650Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650EN 2931-1994航空航天系列FE-PA92HT(A286)耐热钢制长螺纹细柄T形头螺栓等级：900MPa(环境温度)650Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 EN 2932-1996航空航天系列FE-PA92HT(A286)耐热钢镀银长螺纹细螺柄T形头螺栓级等： 900 MPa(环境温度)/650Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 EN 2933-1996航空航天系列NI-P100HT718)耐热镍基合金镀银长螺纹细螺柄T形头螺栓等级：1275 MPa(环境温度)/650Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 EN 2934-1996航空航天系列合金NI-P100HT(铬镍铁合金718)耐热镍基镀银长螺纹细螺柄T形头螺栓等级：1275 MPa(环境温Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 EN 2935-1996航空航天系列NI-P101HT(沃斯帕洛尹合金)耐热镍基合金镀银长螺纹细螺柄T形头螺栓等级：1210 MPa(环境温Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730EN 2936-1996航空航天系列合金NI-P101HT(沃斯帕洛尹合金)耐热镍基镀银长螺纹细螺柄T形头螺栓等级：1210 MPa(环境温Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730EN 3006-1994航空航天系列FE-PA92HT(A286)耐热钢制细柄长螺纹六角头螺栓 等级：900MPa（环境温 度）650 Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650EN 3008-1998航空航天系列NI-P100HT(铬镍铁合金718) 耐热镍基合金长螺纹细柄六角头螺栓等级：1275MPa(环境温度)/650Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650EN 3010-1998航空航天系列NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓等级：1210MPa(环境温度)/730Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730EN 3011-1998航空航天系列镀银NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓等级：1210MPa(环境温度)Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730EN 3052-1993航空航天系列钝化耐热及耐腐蚀钢标准六角头紧公差普通杆短螺纹螺栓等级：1100MPa(环境温度)/425Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 (includes amendment A1:1993)EN 3063-1994航空航天系列NI-P101HT耐热钢镍基合金制中螺纹紧公差柄双六角头螺栓等级： 1210MPa(环境温度)730Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730EN 3112-1995航空航天系列镀镉合金钢全螺纹头标准六角头螺栓分级：大气压为900 MPa（环境温度） 235 Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235EN 3202-1995航空航天系列 T形头螺栓的孔和阱 设计标准Aerospace series - Holes and traps for T-head bolts - Design standardEN 3379-1996航空航天系列合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基中长螺纹紧公差柄双六角螺栓等级：Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730EN 3724-2003航空航天系列 钛合金TI-P64001 MoS2润滑细柄长螺纹双六边头螺栓等级： 1100 MPa (环境温度)Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS coated - Classification: 1 100 MPa (at ambient temperature) / Note: To be replaced by prEN 3724 (2003-05).EN 3725-2003航空航天系列钛合金 TI-P640001 MoS2润滑盘头六瓣槽普通柄长螺纹螺栓等级：1100 MPa（环境温度）Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoS coated - Classification: 1 100 MPa (at ambient temparature) / Note: To be replaced by prEN 3725 (2003-05).EN 3740-1996航空航天系列阳极氧化MoS2润滑钛合金短螺纹紧公差柄薄六角头带肩螺栓、等级：1100MPa(环境温度）/315Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315EN 3818-2003航空航天系列TI-P640001钛合金带MJ螺纹用螺栓等级： 1100 MPa（环境温度）技术规范Aerospace series - Bolts with MJ threads, in titanium alloy TI-P64001 - Classification: 1 100 MPa (at ambient temperature); Technical specification / Note: To be replaced by prEN 3818 (2003-05).EN 3832-2003航空航天系列 NI-P100HT (Inconel 718)耐热镍基合金、 双六角头细柄长螺纹螺栓等级：1550 MPa（环境温Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 / Note: To be replaced by prEN 3832 (2003-05).EN 3833-2003航空航天系列 NI-PH2601 (Inconel 718)耐热镍基合金、 MJ螺纹螺栓等级：1550 MPa（环境温度）650 Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650; Technical specification / Note: To be replaced by prEN 3833 (2003-05).EN 3907-2003航空航天系列钛合金TI-P640001, MoS2润滑、双六角头普通柄长螺纹螺栓等级：1100 MPa (环境温度)/350Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS coated - Classification: 1 100 MPa (at ambient temperature)/350 / Note: To be replaced by prEN 3907 (2003-05).EN 4009-2003航空航天系列耐热镍基合金 NI-P100HT (Inconel 718) 双六角头紧公差柄中长螺纹螺栓等级：1550 MPa (常Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 / Note: To be replaced by prEN 4009 (2003-0EN 4321-2003航空航天系列镀银耐热镍基合金 NI-PH2601 (Inconel 718)制带安全锁线孔的细柄长螺纹双六角头螺栓等级Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 / Note: To be replaced byEN 4322-2003航空航天系列 TI-P640001阳极氧化 MoS涂层制钛合金、带安全锁线孔的细柄长螺纹双六角头螺栓Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS coated - Strength class: 100 MPa (at ambient temperature) / Note: To be replaced by prEN 4322 (2003-05).EN 4352-2003航空航天系列MoS 涂层制耐热镍基合金 NI-PH2601 (Inconel 718)、带安全锁线孔的细柄长螺纹双六Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS coated - Classification: 1550 MPa (at ambient temperature)/425 / Note: To be repEN ISO 10664-1999螺栓和螺钉用内板拧的六角花形Hexalobular internal driving feature for bolts and screws (ISO 10664:1999)EN ISO 13918-1998焊接电弧螺栓焊用螺栓和陶瓷箍套Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:1998)EN ISO 14555-1998焊接金属材料的电弧螺栓焊Welding - Arc stud welding of metallic materials (ISO 14555:1998)EN ISO 3506-1-1997耐腐蚀不锈钢紧固件的机械性能第1部分：螺栓、螺钉和螺柱Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)EN ISO 4014-2000六角头螺栓产品等级A和B级Hexagon head bolts - Product grades A and B (ISO 4014:1999)EN ISO 4016-2000六角头螺栓产品等级C级Hexagon head bolts - Product grade C (ISO 4016:1999)EN ISO 4759-1-2000紧固件公差第1部分：螺栓、螺钉、螺柱和螺母产品等级A、B和C级Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000)EN ISO 4759-3-2000紧固件公差第3部分：螺栓、螺钉和螺母用平垫圈产品等级A和C级Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000)EN ISO 8765-2000米制细牙六角头螺栓产品等级A和B级Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999)EN ISO 887-2000米制普通螺栓、螺钉和螺母用平垫圈总方案Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)EN ISO 898-1-1999碳钢和铸钢铸造的紧固件机械性能第1部分：螺栓、螺钉和螺柱Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)EN ISO 9974-1-2000通用和液压传动用联接件带ISO 261 弹性螺纹或金属金属密封的气门和双头螺栓端头第1部分：螺纹气门Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)EN ISO 9974-2-2000通用和液压传动用联接件带ISO 261 弹性螺纹或金属金属密封的气门和双头螺栓端头第2部分：弹性密封的Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)EN ISO 9974-3-2000通用和液压传动用联接件带ISO 261 弹性螺纹或金属金属密封的气门和双头螺栓端头第3部分：金属金属Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)prEN 10108-2000冷成型螺母和螺栓用圆钢棒尺寸和公差Round steel rod for cold formed nuts and bolts - Dimensions and tolerancesprEN 14399-1-2002预加载高强度结构螺栓 第1部分：一般要求High-strength structural bolting for preloading - Part 1: General requirementsprEN 14399-2-2002预加载高强度结构螺栓 第2部分：预加载适用性试验High-strength structural bolting for preloading - Part 2: Suitability test for preloadingprEN 14399-3-2002预加载高强度结构螺栓 第3部分：HR系统 六角螺栓和螺母装配件High-strength structural bolting for preloading - Part 3: System HR; Hexagon bolt and nut assembliesprEN 14399-4-2002预加载高强度结构螺钉 第4部分：HV系统 六角螺栓和螺母的装配件High-strength structural bolting for preloading - Part 4: System HV; Hexagon bolt and nut assembliesprEN 14420-3-2002带夹具的软管配件 第3部分：销式或螺栓式夹具Hose fittings with clamp units - Part 3: Clamp units, pinned or boltedprEN 2549-1999航空航天系列润滑电镀钛合金制的短螺纹精密配合公差标定柄标定六角头螺栓 等级：大气压为1100 MPa/（环Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315prEN 2859-1999航空航天系列镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级：1100MPa(环境温度)/235Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235prEN 2888-1999航空航天系列 钝化耐腐蚀钢普通六角头紧公差普通柄短螺纹螺栓等级：600MPa (环境温度)/425Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425prEN 2889-1999航空航天系列镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓等级：900 MPa（环境温度）235 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235prEN 3052-1999航空航天系列钝化耐热及耐腐蚀钢标准六角头紧公差普通杆短螺纹螺栓等级：1100MPa(环境温度)/425Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425prEN 3757-1998航空航天系列MoS2润滑耐热钢、自锁浮动自对中双耳系紧螺栓螺母等级： 900 MPa(环境温度)/315Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in heat resisting steel, MoS lubricated - Classification: 900 MPa (at ambient temperature)/315prEN 3820-1999航空航天系列阳极氧化MoS2润滑的钛合金、 标准六角头松公差普通柄短螺纹螺栓 等级：1100 MPa（环境温度Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315prEN 4071-1999航空航天系列铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓等级：1100 MPa(环境温度) /425Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425prEN 4127-1999航空航天系列钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓等级：1100 MPa (环境温度)/425 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425prEN 4128-1999航空航天系列耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓等级：1250 MPa (环境温度)/Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425prEN 4172-1999航空航天系列阳极氧化耐钛合金TI-P64001制突出头剪式紧公差锁紧螺栓米制等级：1100 MPa (环境温度)Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315prEN 4173-1999航空航天系列阳极氧化耐钛合金TI-P64001、100埋头孔普通头剪式紧公差锁紧螺栓米制等级：1100 MPaAerospace series - Lockbolts, 100?countersunk normal head, sheartype, close toleran