H3C S5500 Series 系统升级操作.doc

运行中的H3C S5500 Series交换机 系统升级操作运行中的交换机在FALSH不足以考入新的软件时适用本方法速度速度比较慢1、H3C S5500系统启动进入操作界面Press Ctrl-B to enter Boot Menu. 0Auto-booting.Decompress Image.OK!Startup configuration file does not exist.It will take a long time to get configuration file, please wait.Retrieving configuration file failed!User interface aux0 is available.Press ENTER to get started.#Apr 26 12:00:57:658 2000 H3C SHELL/4/LOGIN: Trap .4.1.2550.: login from Console%Apr 26 12:00:57:800 2000 H3C SHELL/4/LOGIN: Console login from aux0（系统进入完成）2、进入System View（系统视界）界面sysSystem View: return to User View with Ctrl+Z.H3C 在System View中以 中括号 为表示3、为交换机添加IPH3Cinterface Vlan-interface 1 （回车进入Vlan-interface1设置）H3C-Vlan-interface1 已进入Vlan-interface1设置 Vlan-interface1中有以下控制 address Set the IP address of an interface 添加一个IP binding Enable binding of an interface with a VPN-Instance 建立VPN连接 check Check function 检查 forward-broadcast IP forward-broadcast configuration commands 添加IP地址需要使用ip address命令H3C-Vlan-interface1ip address （因为我的本机IP是所以添加为IP 还要设置子网掩码 我这里的是 然后回车）H3C-Vlan-interface1%Apr 26 12:03:28:444 2000 H3C IFNET/4/LINK UPDOWN: GigabitEthernet1/0/18: link status is UP %Apr 26 12:03:28:566 2000 H3C IFNET/4/LINK UPDOWN: Vlan-interface1: link status is UP %Apr 26 12:03:28:678 2000 H3C IFNET/4/UPDOWN: Line protocol on the interface Vlan-interface1 is UP 上面显示交换机IP设置完成4、下面我们来PING以下我的计算机，确认网络连接已建立 H3C-Vlan-interface1ping （交换机 PING ） PING : 56 data bytes, press CTRL_C to break Reply from : bytes=56 Sequence=1 ttl=128 time=6 ms Reply from : bytes=56 Sequence=2 ttl=128 time=2 ms Reply from : bytes=56 Sequence=3 ttl=128 time=2 ms Reply from : bytes=56 Sequence=4 ttl=128 time=2 ms Reply from : bytes=56 Sequence=5 ttl=128 time=2 ms - ping statistics - 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 2/2/6 ms通讯正常5、退出System View 并通过 TFTP从 （我的计算机）获取系统文件H3C-Vlan-interface1quitH3Cquit退回系统底层tftp 这里要使用TFTP命令 tftp 填入获取文件的IP tftp get 获取命令为gettftp get S5500EI-CMW520-R2208-S168.bin 加入要获取文件名加后缀 回车 .开始获取文件 File will be transferred in binary mode Downloading file from remote TFTP server, please wait. TFTP: 12397691 bytes received in 612 second(s) File downloaded successfully. 获取完成6、将获取成功的文件定义为主系统文件 H3Cquit 退出到系统底层 表示使用boot-loader 命令操作 boot-loader file flash:/s5500ei-cmw520-r2208-s168.bin slot 1 main 定义插槽1中闪存的文件s5500ei-cmw520-r2208-s168.bin 为主（main） This command will set the boot file of the specified board. Continue? Y/N:y 回车 The specified file will be used as the main boot file at the next reboot on slot 1!quit* Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved. * Without the owners prior written consent, * no decompiling or reverse-engineering shall be allowed. *User interface aux0 is available.Please press ENTER.#Apr 26 12:18:52:230 2000 H3C SHELL/4/LOGIN: Trap .4.1.2550.: login from Console%Apr 26 12:18:52:372 2000 H3C SHELL/4/LOGIN: Console login from aux0reboot Start to check configuration with next startup configuration file, please wait.DONE! This command will reboot the device. Current configuration may be lost in next startup if you continue. Continue? Y/N:y#Apr 26 12:19:00:744 2000 H3C DEV/1/REBOOT: Reboot device by command. %Apr 26 12:19:00:836 2000 H3C DEV/4/SYSTEM REBOOT: System is rebooting now.7、完成设置然后重启交换机Starting. * * * * H3C S5500-28C-EI BOOTROM, Version 609 * * * * Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. Creation date : Aug 10 2010, 18:57:57 CPU Clock Speed : 533MHz BUS Clock Speed : 133MHz Memory Size : 256MB Mac Address : c4cad94a97dePress Ctrl-B to enter Boot Menu. 0Auto-booting.Decompress Image.OK!Startup configuration file does not exist.It will take a long time to get configuration file, please wait.Retrieving configuration file failed!User interface aux0 is available.重启完成Press ENTER to get started.#Apr 26 12:02:08:028 2000 H3C SHELL/4/LOGIN: Trap .4.1.2550.: login from Console%Apr 26 12:02:08:170 2000 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.8、进入sys 查看版本号 sysSystem View: return to User View with Ctrl+Z.H3Cdis ver（版本查看命令）H3C Comware Platform SoftwareComware Software, Version 5.20, Release 2208 对的Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.H3C S5500-28C-EI up