PPP配置综合实验.doc_第1页
PPP配置综合实验.doc_第2页
PPP配置综合实验.doc_第3页
PPP配置综合实验.doc_第4页
全文预览已结束

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

PPP配置综合实验2010-01-01 13:08:51|分类: CCNA学习指南(中 |标签: |字号大中小订阅 1.PPP协议简单配置RouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R1Pod1R1(config)#username Pod1R2 password ciscoPod1R1(config)#int s0/0/0Pod1R1(config-if)#ip addr 10.0.1.1 255.255.255.0Pod1R1(config-if)#no shutPod1R1(config-if)#encapsulation pppPod1R1(config-if)#ppp authentication chapRouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R2Pod1R2(config)#user Pod1R1 pas ciscoPod1R2(config)#int s0/0/0Pod1R2(config-if)#ip addr 10.0.1.2 255.255.255.0Pod1R2(config-if)#clock rate 64000Pod1R2(config-if)#no shutPod1R2(config-if)#encapsulation pppPod1R2(config-if)#ppp authentication chapPod1R1#show int s0/0/0Serial0/0/0 is up, line protocol is up (connected) #协议状态为up,up Hardware is HD64570 Internet address is 10.0.1.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) #封装PPP协议 LCP Open #LCP是打开的 Open: IPCP, CDPCP #NCP正在监听IP和CDP协议.2.不匹配的WLA类型RouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R1Pod1R1(config)#username Pod1R2 pass CiscoPod1R1(config)#int s0/0/0Pod1R1(config-if)#ip addr 10.0.1.1 255.255.255.0Pod1R1(config-if)#no shutPod1R1(config-if)#encapsulation pppRouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R2Pod1R2(config)#user Pod1R1 pas ciscoPod1R2(config)#int s0/0/0Pod1R2(config-if)#ip addr 10.0.1.2 255.255.255.0Pod1R2(config-if)#encapsulation hdlcPod1R2(config-if)#clock rate 64000Pod1R2(config-if)#no shutPod1R1#show int s0/0/0Serial0/0/0 is up, line protocol is down (disabled) #协议状态为up,down Hardware is HD64570 Internet address is 10.0.1.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) #封装PPP协议 LCP Closed #LCP关闭 Closed: LEXCP, BRIDGECP, IPCP, CCP, CDPCP, LLC2, BACPPod1R2#show int s0/0/0Serial0/0/0 is up, line protocol is down (disabled) Hardware is HD64570 Internet address is 10.0.1.2/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec) #封装HDLC协议不能在一端使用PPP,另一端使用HDLC3.RouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R1Pod1R1(config)#user Pod1R2 pas ciscoPod1R1(config)#int s0/0/0Pod1R1(config-if)#ip addr 10.0.1.1 255.255.255.0Pod1R1(config-if)#no shutPod1R1(config-if)#encapsulation ppPod1R1(config-if)#ppp authentication chapRouterenaRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#host Pod1R2Pod1R2(config)#user Pod1R1 pas ciscoPod1R2(config)#int s0/0/0Pod1R2(config-if)#ip addr 10.2.1.2 255.255.255.0Pod1R2(config-if)#clock rate 64000Pod1R2(config-if)#no shutPod1R2(config-if)#encapsulation pppPod1R2(config-if)#ppp authentication chapPod1R1#show int s0/0/0Serial0/0/0 is up, line protocol is up (connected) #协议状态up,up Hardware is HD64570 Internet address is 10.0.1.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) LCP Open Open: IPCP, CDPCPPPP是一个第2层WAN封装协议,不关心IP地址的配置,所以,链路是通的,然而由于不匹配的IP地址配置,不能使用IP协议Pod1R1#sh cdp neighbors detail #

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

最新文档

评论

0/150

提交评论