TS-450S中文说明书.doc

TO DO THIS PRESSTemporarily change the volume or frequency of the band thatcannot control暂时改变声音或频率的控制 E.CHGDetermine if a frequency is in use before transmitting静噪 MONIThe LCD illumination lamp lights启动LCD灯光 LAMPChange the frequency in 1MHz step改变频率1MHZ步进 MHzVFO modeVFO模式 VFOMemory channel recall mode储存频道收回模式 MRActivate call channel function启动呼叫频道功能 CALLRecall the received message收回接收的信息 MSGExchange Main and Sub band content交换主要和次要波段内容 BANDActivate all function (blue letters)启动全部功能（蓝色字） FMemory date entering mode存储信道输入 MActivate tone encoder启动音调编码 TONEExchange dual band reception or single band reception交换双波段或单波段接收 DUALSelect desired transmitter offset direction异频（差频） SHIFTActivate Band scan启动波段扫描 VFO(1 second按1秒)Activate Memory channel scan启动储存频道扫描 MR(1 second)Activate CALL scan启动呼叫扫描 CALL(1 second)Select volume or encoder mode选择音量或编码模式 F then E.CHGThe LCD illumination lamp lights at all times背景灯光长亮 F then LAMPMemory shift储存异频模式 F then VFOActivate VFO/Memory scan启动VFO/储存扫描 F then MRActivate VFO/Memory Call scan启动VFO/储存呼叫频道扫描 F then CALLTurn message function on or off旋转信息功能开或关 F then NSGTurn automatic band change function on or off旋转自动波段改变功能开或关 F then BANDActivate PAGING mode启动寻呼 模式 F then 1Activate DTSS function启动DTSS功能 F then 2Activate CTCSS function启动CTCSS 功能 F then 3Activate alert function启动警惕功能 F then 4Switching speaker output when a external spealer is connected外接扬声器时开关扬声器输出 F then 6Turn CLOCK function on or off转至时钟功能开或关 F then 7Turn switch on timerfunction on or off转至定时开机时间功能的开或关 F then 8Turn switch off timerfunction on or off转至定时关机时间功能的开或关 F then 9Activate memory channel lock out function启动储存频道锁出功能 F then 0Turn KEY LOCK function on or off转至锁键功能开或关 F then MTurn TX STOP function on or off转至停止TX功能开或关 F then f2Select transmit output power level选择发射功率 F then TONEActivate duplex operation启动双工(一个波段发射,另一个接收)操作 F then DUALTurn reverse function on or off旋转翻转功能开或关（倒频） F then SHIFTReturn the encoder to the original setting mode复位 F (1 second) then E.CHGRecalling stored DTMF cords调回储存DTMF F (1 second) Then MHZTurn automatic power off function on or off旋转自动开机关功能开或关 F (1second) Then VFOTurn battery saver function on or off旋转节电功能开或关 F (1 second) Then MSignaling squelch function on or off信号压缩功能开或关 F (1 second) Then CALLMessage memory recall信息储存收回 F (1 second) then MSGActivate paging code selection mode启动选择寻呼号码模式 F (1 second) then 1Activate DTSS code selection mode启动选择DTSS号码模式 F (1 second) then 2Activate frequency step selection mode启动选择频率步进模式 F (1 second) then 3Recall lower limit frequency of programmable band scan收回限制向下频率可编程波段扫描 F (1 second) then 4Recall upper limit frequency of programmable band scan收回限制向上频率可编程波段扫描 F (1 second) then 5Change the speaker output when a external speaker is connected外接扬声器时改变扬声器输出 F (1 second) then 6Activate Time setting function启动时间调整功能 F (1 second) then 7Switch-on timer setting mode接同时间调整模式 F (1 second) then 8Switch-off timer setting mode关闭时间调整模式 F (1 second) then 9Select tone frequency选择音调频率 F (1 second) then TONEEnter date into the call channel进入日期到呼叫频道 M then CALLMessage memory buffer clearM (1 second) then NSGEnter displayed date in lower limit frequency of programmableVFO tuning limit进入显示日期限制向下功能的可编程的VFO调谐限制M (1 second) then 1Enter displayed frequency in lower limit frequency ofprogrammable bandscan进入显示频率在限制向下功能的可编程波段扫描M (1 second) then 4Enter displayed frequency in upper limit frequency ofprogrammable bandscan进入显示频率在限制向上功能的可编程波段扫描M (1 second) then5Select encoder mode选择编码模式 E.CHG+POWERSelect 2 or 3 digit memory channel recall using numerickey pad选择2-3个数字储存频道？MR+POWERTurn automatic shift function on or off旋转自动异频功能开或关 BAND+POWERReset VFO重新设置VFO F+POWERReset memory重新设置储存 M+POWERTurn the message memory function on or off旋转信息储存功能开或关 f2+POWERAnswer-Back on or off回到原处开或关 MHz+POWERDelay time selection延迟时间选择 1+POWERDTMF delay time selectionDTMF延迟时间选择 2+POWERChannelized frequency display on or off显示频率开或关 3+POWERTurn earphone mode on or off旋转耳机模式开或关 4+POWERSelection a beep s