出水BB霜实用生产配方及工艺.doc

精品文档Quick water-breaking BB cream 出水BB霜SC031-0056%AABIL EM 90 Cetyl PEG/PPG-10/1 Dimethicone鲸蜡基聚乙二醇/聚丙二醇-10/1聚二甲基硅氧烷1.7ABIL Wax 9801Cetyl Dimethicone 鲸蜡基聚二甲基硅氧烷2.0ABIL OSW 5 Cyclopentasiloxane ; Dimethiconol环五聚二甲基硅氧烷;聚二甲基硅氧烷醇10.0DC 345 Cyclopentasiloxane (and) Cyclohexasiloxane环五聚二甲基硅氧烷; 环己硅氧烷5.6AEROSIL R 972Silica dimethyl silylate 二甲基甲硅烷基化硅石1.3Talc滑石粉2.0Microcrystalline Wax 6089微晶蜡1.0BAS(Local TiO2) 二氧化钛4.0C33-8073 yellow氧化铁黄0.4C33-8075 red氧化铁红0.12C33-134 black氧化铁黑0.08AEROSIL R 972Silica dimethyl silylate 二甲基甲硅烷基化硅石0.2TEGOSOFT OSEthylhexyl Stearate 硬脂酸乙基己酯5.0CGlycerin甘油15.0NaCl 氯化钠0.5Water水To 100Preservative防腐剂Q.SPreparation:1. Use Ultra T 25 to disperse Phase B, 24000rpm,1min2.Heat Phase A and C to 85C separately, 3. Add Phase B into Phase A with stirring to be homogeneousThis information and all further technical advice is based on our present knowledge and experience. However,it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used.4. Add Phase C into Phase A/B slowly with stirring, keep at 80C5. Homogenize with fast stirring for a short while6. Cool down to 40C with stirring, homogenize again, high stirring speed工艺:1. 用Ultra T 25来分散色浆,24000rpm,1min2. 分别加热A相和C相到85度3. B相加入A相,搅拌均匀4. 搅拌下把C相加入