电机编码器解码.docx

/*功能名称IM3_PWM_Init(u16 arr,u16 psc) 描述 TIM3产生四路PWM*/void TIM3_PWM_Init(u16 arr,u16 psc) GPIO_InitTypeDef GPIO_InitStructure; TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; TIM_OCInitTypeDef TIM_OCInitStructure; RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO, ENABLE); /使能GPIO外设和AFIO复用功能模块时钟使能 GPIO_PinRemapConfig(GPIO_FullRemap_TIM3, ENABLE); /Timer3全映射 GPIOC- 6,7,8,9 /用于TIM3的CH2输出的PWM通过该LED显示 /设置该引脚为复用输出功能,输出TIM3 CH1 CH2 CH3 CH4 的PWM脉冲波形 GPIO_InitStructure.GPIO_Pin =GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9; /初始化GPIO GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; /复用推挽输出 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOC, &GPIO_InitStructure); GPIO_ResetBits(GPIOC,GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9);/默认电机使能端状态：不使能 TIM_TimeBaseStructure.TIM_Period = arr; /设置在下一个更新事件装入活动的自动重装载寄存器周期的值 TIM_TimeBaseStructure.TIM_Prescaler =psc; /设置用来作为TIMx时钟频率除数的预分频值 这里是72分频，那么时钟频率就是1M TIM_TimeBaseStructure.TIM_ClockDivision = 0; /设置时钟分割:TDTS = Tck_tim TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; /TIM向上计数模式 TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure); /根据TIM_TimeBaseInitStruct中指定的参数初始化TIMx的时间基数单位 TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; /选择定时器模式:TIM脉冲宽度调制模式1 TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; /比较输出使能 TIM_OCInitStructure.TIM_Pulse = 0; /设置待装入捕获比较寄存器的脉冲值 TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; /输出极性:TIM输出比较极性高 TIM_OC1Init(TIM3, &TIM_OCInitStructure); /根据TIM_OCInitStruct中指定的参数初始化外设TIMx TIM_OC1PreloadConfig(TIM3, TIM_OCPreload_Enable); /使能TIMx在CCR1上的预装载寄存器 TIM_OC2Init(TIM3, &TIM_OCInitStructure); /根据TIM_OCInitStruct中指定的参数初始化外设TIMx TIM_OC2PreloadConfig(TIM3, TIM_OCPreload_Enable); /使能TIMx在CCR2上的预装载寄存器 TIM_OC3Init(TIM3, &TIM_OCInitStructure); /根据TIM_OCInitStruct中指定的参数初始化外设TIMx TIM_OC3PreloadConfig(TIM3, TIM_OCPreload_Enable); /使能TIMx在CCR3上的预装载寄存器 TIM_OC4Init(TIM3, &TIM_OCInitStructure); /根据TIM_OCInitStruct中指定的参数初始化外设TIMx TIM_OC4PreloadConfig(TIM3, TIM_OCPreload_Enable); /使能TIMx在CCR4上的预装载寄存器 TIM_ARRPreloadConfig(TIM3, ENABLE); /使能TIMx在ARR上的预装载寄存器 TIM_Cmd(TIM3, ENABLE); /使能TIMx外设 /*功能名称TIM4_PWMINPUT_INIT(u16 arr,u16 psc) 描述 PWM输入初始化*/void TIM4_PWMINPUT_INIT(u16 arr,u16 psc) TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; /TIM的初始化结构体 NVIC_InitTypeDef NVIC_InitStructure; /中断配置 TIM_ICInitTypeDef TIM4_ICInitStructure; /TIM4 PWM配置结构体 GPIO_InitTypeDef GPIO_InitStructure; /IO口配置结构体 RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE); /Open TIM4 clock RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); /open gpioB clock GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; /GPIO 7 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; /上拉输入 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); TIM_TimeBaseStructure.TIM_Period = arr; /设置在下一个更新事件装入活动的自动重装载寄存器周期的值 TIM_TimeBaseStructure.TIM_Prescaler =psc; /设置用来作为TIMx时钟频率除数的预分频值 TIM_TimeBaseStructure.TIM_ClockDivision = 0; /设置时钟分割:TDTS = Tck_tim TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; /TIM向上计数模式 TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure); /根据TIM_TimeBaseInitStruct中指定的参数初始化TIMx的时间基数单位 /*配置中断优先级*/ NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); TIM4_ICInitStructure.TIM_Channel = TIM_Channel_2; TIM4_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising; TIM4_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI; TIM4_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1; TIM4_ICInitStructure.TIM_ICFilter = 0x3; /Filter:过滤 TIM_PWMIConfig(TIM4, &TIM4_ICInitStructure); /PWM输入配置 TIM_SelectInputTrigger(TIM4, TIM_TS_TI2FP2); /选择有效输入端 TIM_SelectSlaveMode(TIM4, TIM_SlaveMode_Reset); /配置为主从复位模式 TIM_SelectMasterSlaveMode(TIM4, TIM_MasterSlaveMode_Enable);/启动定时器的被动触发 TIM_ITConfig(TIM4, TIM_IT_CC2|TIM_IT_Update, ENABLE); /中断配置 TIM_ClearITPendingBit(TIM4, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 TIM_Cmd(TIM4, ENABLE); void TIM4_IRQHandler(void) if (TIM_GetITStatus(TIM4, TIM_IT_CC2) != RESET)/捕获1发生捕获事件 duty_TIM4 = TIM_GetCapture1(TIM4); /采集占空比 if (TIM_GetCapture2(TIM4)600) period_TIM4 = TIM_GetCapture2(TIM4);/简单的处理 CollectFlag_TIM4 = 0; TIM_ClearITPendingBit(TIM4, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位/*功能名称TIM1_PWMINPUT_INIT(u16 arr,u16 psc) 描述 PWM输入初始化*/ void TIM1_PWMINPUT_INIT(u16 arr,u16 psc) TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; /TIM的初始化结构体 NVIC_InitTypeDef NVIC_InitStructure; /中断配置 TIM_ICInitTypeDef TIM1_ICInitStructure; /PWM配置结构体 GPIO_InitTypeDef GPIO_InitStructure; /IO口配置结构体 RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE); /Open TIM1 clock RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOE, ENABLE); /open gpioE clock GPIO_PinRemapConfig(GPIO_FullRemap_TIM1, ENABLE); /Timer1完全重映射 TIM1_CH2-PE11 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11; /GPIO 11 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; /上拉输入 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOE, &GPIO_InitStructure); TIM_TimeBaseStructure.TIM_Period = arr; /设置在下一个更新事件装入活动的自动重装载寄存器周期的值 TIM_TimeBaseStructure.TIM_Prescaler =psc; /设置用来作为TIMx时钟频率除数的预分频值 TIM_TimeBaseStructure.TIM_ClockDivision = 0; /设置时钟分割:TDTS = Tck_tim TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; /TIM向上计数模式 TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure); /根据TIM_TimeBaseInitStruct中指定的参数初始化TIMx的时间基数单位 /*配置中断优先级*/ NVIC_InitStructure.NVIC_IRQChannel = TIM1_CC_IRQn; /TIM1捕获中断 NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); TIM1_ICInitStructure.TIM_Channel = TIM_Channel_2; TIM1_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising; TIM1_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI; TIM1_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1; TIM1_ICInitStructure.TIM_ICFilter = 0x03; /Filter:过滤 TIM_PWMIConfig(TIM1, &TIM1_ICInitStructure); /PWM输入配置 TIM_SelectInputTrigger(TIM1, TIM_TS_TI2FP2); /选择有效输入端 TIM_SelectSlaveMode(TIM1, TIM_SlaveMode_Reset); /配置为主从复位模式 TIM_SelectMasterSlaveMode(TIM1, TIM_MasterSlaveMode_Enable);/启动定时器的被动触发 / TIM_ITConfig(TIM1, TIM_IT_CC2|TIM_IT_Update, ENABLE); /中断配置 TIM_ITConfig(TIM1, TIM_IT_CC2, ENABLE); /通道2 捕获中断打开 /TIM_ClearITPendingBit(TIM1, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 TIM_Cmd(TIM1, ENABLE); void TIM1_CC_IRQHandler(void) if (TIM_GetITStatus(TIM1, TIM_IT_CC2) != RESET)/捕获1发生捕获事件 duty_TIM1 = TIM_GetCapture1(TIM1); /采集占空比 if (TIM_GetCapture2(TIM1)600) period_TIM1 = TIM_GetCapture2(TIM1); CollectFlag_TIM1 = 0; TIM_ClearITPendingBit(TIM1, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 /*功能名称TIM2_PWMINPUT_INIT(u16 arr,u16 psc) 描述 PWM输入初始化*/void TIM2_PWMINPUT_INIT(u16 arr,u16 psc) TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; /TIM的初始化结构体 NVIC_InitTypeDef NVIC_InitStructure; /中断配置 TIM_ICInitTypeDef TIM2_ICInitStructure; /TIM2 PWM配置结构体 GPIO_InitTypeDef GPIO_InitStructure; /IO口配置结构体 RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); /Open TIM2 clock / RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); /open gpioB clock RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE); /使能GPIO外设和AFIO复用功能模块时钟 GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE); /关闭JTAG GPIO_PinRemapConfig(GPIO_FullRemap_TIM2, ENABLE); /Timer2完全重映射 TIM2_CH2-PB3 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; /GPIO 3 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; /浮空输入 上拉输入 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); TIM_TimeBaseStructure.TIM_Period = arr; /设置在下一个更新事件装入活动的自动重装载寄存器周期的值 TIM_TimeBaseStructure.TIM_Prescaler =psc; /设置用来作为TIMx时钟频率除数的预分频值 TIM_TimeBaseStructure.TIM_ClockDivision = 0; /设置时钟分割:TDTS = Tck_tim TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; /TIM向上计数模式 TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); /根据TIM_TimeBaseInitStruct中指定的参数初始化TIMx的时间基数单位 /*配置中断优先级*/ NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); TIM2_ICInitStructure.TIM_Channel = TIM_Channel_2; TIM2_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising; TIM2_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI; TIM2_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1; TIM2_ICInitStructure.TIM_ICFilter = 0x3; /Filter:过滤 TIM_PWMIConfig(TIM2, &TIM2_ICInitStructure); /PWM输入配置 TIM_SelectInputTrigger(TIM2, TIM_TS_TI2FP2); /选择有效输入端 TIM_SelectSlaveMode(TIM2, TIM_SlaveMode_Reset); /配置为主从复位模式 TIM_SelectMasterSlaveMode(TIM2, TIM_MasterSlaveMode_Enable);/启动定时器的被动触发 TIM_ITConfig(TIM2, TIM_IT_CC2|TIM_IT_Update, ENABLE); /中断配置 TIM_ClearITPendingBit(TIM2, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 TIM_Cmd(TIM2, ENABLE); void TIM2_IRQHandler(void) if (TIM_GetITStatus(TIM2, TIM_IT_CC2) != RESET)/捕获1发生捕获事件 duty_TIM2 = TIM_GetCapture1(TIM2); /采集占空比 if (TIM_GetCapture2(TIM2)600) period_TIM2 = TIM_GetCapture2(TIM2); CollectFlag_TIM2 = 0; TIM_ClearITPendingBit(TIM2, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 /*功能名称TIM5_PWMINPUT_INIT(u16 arr,u16 psc) 描述 PWM输入初始化*/void TIM5_PWMINPUT_INIT(u16 arr,u16 psc) TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; /TIM的初始化结构体 NVIC_InitTypeDef NVIC_InitStructure; /中断配置 TIM_ICInitTypeDef TIM5_ICInitStructure; /TIM4 PWM配置结构体 GPIO_InitTypeDef GPIO_InitStructure; /IO口配置结构体 RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM5, ENABLE); /Open TIM4 clock RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); /open gpioB clock GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; /GPIO 1 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU; /浮空输入 上拉输入 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOA, &GPIO_InitStructure); TIM_TimeBaseStructure.TIM_Period = arr; /设置在下一个更新事件装入活动的自动重装载寄存器周期的值 TIM_TimeBaseStructure.TIM_Prescaler =psc; /设置用来作为TIMx时钟频率除数的预分频值 TIM_TimeBaseStructure.TIM_ClockDivision = 0; /设置时钟分割:TDTS = Tck_tim TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; /TIM向上计数模式 TIM_TimeBaseInit(TIM5, &TIM_TimeBaseStructure); /根据TIM_TimeBaseInitStruct中指定的参数初始化TIMx的时间基数单位 /*配置中断优先级*/ NVIC_InitStructure.NVIC_IRQChannel = TIM5_IRQn; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); TIM5_ICInitStructure.TIM_Channel = TIM_Channel_2; TIM5_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_Rising; TIM5_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI; TIM5_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1; TIM5_ICInitStructure.TIM_ICFilter = 0x3; /Filter:过滤 TIM_PWMIConfig(TIM5, &TIM5_ICInitStructure); /PWM输入配置 TIM_SelectInputTrigger(TIM5, TIM_TS_TI2FP2); /选择有效输入端 TIM_SelectSlaveMode(TIM5, TIM_SlaveMode_Reset); /配置为主从复位模式 TIM_SelectMasterSlaveMode(TIM5, TIM_MasterSlaveMode_Enable);/启动定时器的被动触发 TIM_ITConfig(TIM5, TIM_IT_CC2|TIM_IT_Update, ENABLE); /中断配置 TIM_ClearITPendingBit(TIM5, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位 TIM_Cmd(TIM5, ENABLE); void TIM5_IRQHandler(void) if (TIM_GetITStatus(TIM5, TIM_IT_CC2) != RESET)/捕获1发生捕获事件 duty_TIM5 = TIM_GetCapture1(TIM5); /采集占空比 if (TIM_GetCapture2(TIM5)600) period_TIM5 = TIM_GetCapture2(TIM5); CollectFlag_TIM5 = 0; TIM_ClearITPendingBit(TIM5, TIM_IT_CC2|TIM_IT_Update); /清除中断标志位PID部分typedef struct int setpoint;/设定目标 int sum_error;/误差累计 float proportion ;/比例常数 float integral ;/积分常数 float derivative;/微分常数 int last_error;/e-1 int prev_error;/e-2PIDtypedef;float Kp = 0.32 ; /比例常数float Ti = 0.09 ; /积分时间常数float Td = 0.0028 ; /微分时间常数#define T 0.02 /采样周期#define Ki Kp*(T/Ti) / Kp Ki Kd 三个主要参数#define Kd Kp*(Td/T)PID.Hvoid PIDperiodinit(u16 arr,u16 psc); /PID 采样定时器设定void incPIDinit(void); /初始化，参数清零清零int incPIDcalc(PIDtypedef*PIDx,u16 nextpoint); /PID计算void PID_setpoint(PIDtypedef*PIDx,u16 setvalue); /设定 PID预期值void PID_set(float pp,float ii,float dd);/设定PID kp ki kd三个参数void set_speed(float W1,float W2,float W3,float W4);/设定四个电机的目标转速int incPIDcalc(PIDtypede