华为Rip实验练习

华为HCNA_路由（RIP）实验练习（tony）要求：配置以上设备接口IP，并配置Rip，关闭路由汇总，使PC1与PC2实现互通配置如下：cloclock dclock datetime 10:32:00 2017-03-08sysystem-view Enter system view, return user view with Ctrl+Z.HuaweiHuaweisyHuaweisysname R1R1R1suR1super pR1super password cR1super password cipher 123456R1R1usR1user-iR1user-interface vR1user-interface vty 0 4R1-ui-vty0-4R1-ui-vty0-4authR1-ui-vty0-4authentication-mode pR1-ui-vty0-4authentication-mode password Please configure the login password (maximum length 16):123456R1-ui-vty0-4R1-ui-vty0-4seR1-ui-vty0-4set authR1-ui-vty0-4set authentication pR1-ui-vty0-4set authentication password cR1-ui-vty0-4set authentication password cipher 123456R1-ui-vty0-4R1-ui-vty0-4qR1R1usR1user-iR1user-interface cR1user-interface console 0R1-ui-console0R1-ui-console0authR1-ui-console0authentication-mode pR1-ui-console0authentication-mode password Please configure the login password (maximum length 16):123456R1-ui-console0R1-ui-console0seR1-ui-console0set authR1-ui-console0set authentication pR1-ui-console0set authentication password cR1-ui-console0set authentication password cipher 123456R1-ui-console0qR1R1aaaR1-aaaloR1-aaalocal-user admin paR1-aaalocal-user admin password cR1-aaalocal-user admin password cipher admin123R1-aaaR1-aaaloR1-aaalocal-user admin serR1-aaalocal-user admin service-type tR1-aaalocal-user admin service-type telnetR1-aaaR1-aaaqR1R1int g0/0/0R1-GigabitEthernet0/0/0ip add 192.168.1.254 24R1-GigabitEthernet0/0/0Mar 8 2017 10:45:41-08:00 R1 %01IFNET/4/LINK_STATE(l)0:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. R1-GigabitEthernet0/0/0R1-GigabitEthernet0/0/0unR1-GigabitEthernet0/0/0undo shR1-GigabitEthernet0/0/0undo shutdown Info: Interface GigabitEthernet0/0/0 is not shutdown.R1-GigabitEthernet0/0/0qR1R1int g0/0/1R1-GigabitEthernet0/0/1ip add 192.168.12.1 24R1-GigabitEthernet0/0/1Mar 8 2017 10:46:24-08:00 R1 %01IFNET/4/LINK_STATE(l)1:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. R1-GigabitEthernet0/0/1R1-GigabitEthernet0/0/1un R1-GigabitEthernet0/0/1undo shR1-GigabitEthernet0/0/1undo shutdown Info: Interface GigabitEthernet0/0/1 is not shutdown.R1-GigabitEthernet0/0/1R1-GigabitEthernet0/0/1qR1R1dis ip int br*down: administratively downdown: standby(l): loopback(s): spoofingThe number of interface that is UP in Physical is 3The number of interface that is DOWN in Physical is 1The number of interface that is UP in Protocol is 3The number of interface that is DOWN in Protocol is 1Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 192.168.1.254/24 up up GigabitEthernet0/0/1 192.168.12.1/24 up up GigabitEthernet0/0/2 unassigned down down NULL0 unassigned up up(s) R1qsave The current configuration will be written to the device. Are you sure to continue? (y/n)n:y It will take several minutes to save configuration file, please wait. Configuration file had been saved successfully Note: The configuration file will take effect after being activated Please check whether system data has been changed, and save data in time Configuration console time out, please press any key to log onPassword:sysystem-view Enter system view, return user view with Ctrl+Z.R1ripR1-rip-1verR1-rip-1verify-sourceR1-rip-1verR1-rip-1version 2R1-rip-1unR1-rip-1undo sumR1-rip-1undo summary R1-rip-1R1-rip-1netR1-rip-1network 192.168.1.0R1-rip-1R1-rip-1netR1-rip-1network 192.168.12.0R1-rip-1R1-rip-1qR1R1qsave The current configuration will be written to the device. Are you sure to continue? (y/n)n:y It will take several minutes to save configuration file, please wait. Configuration file had been saved successfully Note: The configuration file will take effect after being activateddisdisplay ip routdisplay ip routing-table Route Flags: R - relay, D - download to fib-Routing Tables: Public Destinations : 10 Routes : 10 Destination/Mask Proto Pre Cost Flags NextHop Interface 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0 192.168.1.0/24 Direct 0 0 D 192.168.1.254 GigabitEthernet0/0/0 192.168.1.254/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 192.168.1.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 192.168.12.0/24 Direct 0 0 D 192.168.12.1 GigabitEthernet0/0/1 192.168.12.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1 192.168.12.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0Password:Password:Password:ping 192.168.2.254 PING 192.168.2.254: 56 data bytes, press CTRL_C to break Reply from 192.168.2.254: bytes=56 Sequence=1 ttl=254 time=60 ms Reply from 192.168.2.254: bytes=56 Sequence=2 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=3 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=4 ttl=254 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=5 ttl=254 time=30 ms - 192.168.2.254 ping statistics - 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 30/42/60 msping 192.168.2.1 PING 192.168.2.1: 56 data bytes, press CTRL_C to break Request time out Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=126 time=40 ms Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=126 time=50 ms Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=126 time=30 ms Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=126 time=40 ms - 192.168.2.1 ping statistics - 5 packet(s) transmitted 4 packet(s) received 20.00% packet loss round-trip min/avg/max = 30/40/50 mscloclock dclock datetime 11:05:00 2017-03-08sysystem-view Enter system view, return user view with Ctrl+Z.HuaweiHuaweisyHuaweisysname R2R2suR2super pR2super password cR2super password cipher 123456R2R2usR2user-iR2user-interface vR2user-interface vty 0 4R2-ui-vty0-4authR2-ui-vty0-4authentication-mode pR2-ui-vty0-4authentication-mode password Please configure the login password (maximum length 16):123456R2-ui-vty0-4seR2-ui-vty0-4set authR2-ui-vty0-4set authentication pR2-ui-vty0-4set authentication password cR2-ui-vty0-4set authentication password cipher 123456R2-ui-vty0-4qR2R2usR2user-iR2user-interface cR2user-interface console 0R2-ui-console0authR2-ui-console0authentication-mode pR2-ui-console0authentication-mode password Please configure the login password (maximum length 16):123456R2-ui-console0seR2-ui-console0set authR2-ui-console0set authentication pR2-ui-console0set authentication password cR2-ui-console0set authentication password cipher 123456R2-ui-console0qR2R2aaaR2-aaaloR2-aaalocal-user admin pR2-aaalocal-user admin password cR2-aaalocal-user admin password cipher admin1234R2-aaaR2-aaaloR2-aaalocal-user admin serR2-aaalocal-user admin service-type telR2-aaalocal-user admin service-type telnet R2-aaaR2-aaaqR2R2int gR2int GigabitEthernet 0/0/0R2-GigabitEthernet0/0/0ip add 192.168.12.2 24R2-GigabitEthernet0/0/0Mar 8 2017 11:14:56-08:00 R2 %01IFNET/4/LINK_STATE(l)0:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. R2-GigabitEthernet0/0/0unR2-GigabitEthernet0/0/0undo shR2-GigabitEthernet0/0/0undo shutdown Info: Interface GigabitEthernet0/0/0 is not shutdown.R2-GigabitEthernet0/0/0qR2R2int g0/0/1R2-GigabitEthernet0/0/1ip add 192.168.23.1 24R2-GigabitEthernet0/0/1Mar 8 2017 11:17:05-08:00 R2 %01IFNET/4/LINK_STATE(l)1:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. R2-GigabitEthernet0/0/1unR2-GigabitEthernet0/0/1undo shR2-GigabitEthernet0/0/1undo shutdown Info: Interface GigabitEthernet0/0/1 is not shutdown.R2-GigabitEthernet0/0/1qR2R2dis ip int br*down: administratively downdown: standby(l): loopback(s): spoofingThe number of interface that is UP in Physical is 3The number of interface that is DOWN in Physical is 1The number of interface that is UP in Protocol is 3The number of interface that is DOWN in Protocol is 1Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 192.168.12.2/24 up up GigabitEthernet0/0/1 192.168.23.1/24 up up GigabitEthernet0/0/2 unassigned down down NULL0 unassigned up up(s) R2R2R2R2qsave The current configuration will be written to the device. Are you sure to continue? (y/n)n:y It will take several minutes to save configuration file, please wait. Configuration file had been saved successfully Note: The configuration file will take effect after being activated Please check whether system data has been changed, and save data in time Configuration console time out, please press any key to log onPassword:Password:sysystem-view Enter system view, return user view with Ctrl+Z.R2R2R2ripR2-rip-1verR2-rip-1verify-sourceR2-rip-1verR2-rip-1version 2R2-rip-1unR2-rip-1undo sumR2-rip-1undo summary R2-rip-1R2-rip-1netR2-rip-1network 192.168.12.0R2-rip-1R2-rip-1netR2-rip-1network 192.168.23.0R2-rip-1R2-rip-1qR2R2disR2display ip rouR2display ip routing-table Route Flags: R - relay, D - download to fib-Routing Tables: Public Destinations : 11 Routes : 11 Destination/Mask Proto Pre Cost Flags NextHop Interface 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0 192.168.1.0/24 RIP 100 1 D 192.168.12.1 GigabitEthernet0/0/0 192.168.12.0/24 Direct 0 0 D 192.168.12.2 GigabitEthernet0/0/0 192.168.12.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 192.168.12.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/0 192.168.23.0/24 Direct 0 0 D 192.168.23.1 GigabitEthernet0/0/1 192.168.23.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1 192.168.23.255/32 Direct 0 0 D 127.0.0.1 GigabitEthernet0/0/1255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0R2qsave The current configuration will be written to the device. Are you sure to continue? (y/n)n:y It will take several minutes to save configuration file, please wait. Configuration file had been saved successfully Note: The configuration file will take effect after being activatedPassword:ping 192.168.1.1 PING 192.168.1.1: 56 data bytes, press CTRL_C to break Request time out Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=127 time=50 ms Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=127 time=20 ms Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=127 time=20 ms Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=127 time=30 ms - 192.168.1.1 ping statistics - 5 packet(s) transmitted 4 packet(s) received 20.00% packet loss round-trip min/avg/max = 20/30/50 msping 192.168.1.254 PING 192.168.1.254: 56 data bytes, press CTRL_C to break Reply from 192.168.1.254: bytes=56 Sequence=1 ttl=255 time=60 ms Reply from 192.168.1.254: bytes=56 Sequence=2 ttl=255 time=30 ms Reply from 192.168.1.254: bytes=56 Sequence=3 ttl=255 time=40 ms Reply from 192.168.1.254: bytes=56 Sequence=4 ttl=255 time=30 ms Reply from 192.168.1.254: bytes=56 Sequence=5 ttl=255 time=30 ms - 192.168.1.254 ping statistics - 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 30/38/60 msping 192.168.2.254 PING 192.168.2.254: 56 data bytes, press CTRL_C to break Reply from 192.168.2.254: bytes=56 Sequence=1 ttl=255 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=2 ttl=255 time=20 ms Reply from 192.168.2.254: bytes=56 Sequence=3 ttl=255 time=40 ms Reply from 192.168.2.254: bytes=56 Sequence=4 ttl=255 time=110 ms Reply from 192.168.2.254: bytes=56 Sequence=5 ttl=255 time=20 ms - 192.168.2.254 ping statistics - 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 20/46/110 msping 192.168.2.1 PING 192.168.2.1: 56 data bytes, press CTRL_C to break Request time out Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=127 time=20 ms Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=127 time=30 ms Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=127 time=30 ms Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=127 time=40 ms - 192.168.2.1 ping statistics - 5 packet(s) transmitted 4 packet(s) received 20.00% packet loss round-trip min/avg/max = 20/30/40 mscloclock dclock datetime 13:56:00 2017-03-08sysystem-view Enter system view, return user view with Ctrl+Z.HuaweisyHuaweisysname R3R3suR3super pR3super password cR3super password cipher 123456R3R3usR3user-iR3user-interface vR3user-interface vty 0 4R3-ui-vty0-4R3-ui-vty0-4authR3-ui-vty0-4authentication-mode pR3-ui-vty0-4authentication-mode password Please configure the login password (maximum length 16):123456R3-ui-vty0-4seR3-ui-vty0-4set authR3-ui-vty0-4set authentication pR3-ui-vty0-4set authentication password cR3-ui-vty0-4set authentication password cipher 123456R3-ui-vty0-4R3-ui-vty0-4qR3R3usR3user-iR3user-interface cR3user-interface console 0R3-ui-console0authR3-ui-console0authentication-mode pR3-ui-console0authentication-mode password Please configure the login password (maximum length 16):123456R3-ui-console0seR3-ui-console0set authR3-ui-console0set authentication pR3-ui-console0set authentication password cR3-ui-console0set authentication password cipher 123456R3-ui-console0qR3R3aaaR3-aaaloR3-aaalocal-user admin pR3-aaalocal-user admin password cR3-aaalocal-user admin password cipher admin123R3-aaaR3-aaaloR3-aaalocal-user admin serR3-aaalocal-user admin service-type tR3-aaalocal-user admin service-type telnetR3-aaaqR3R3int g0/0/0R3-GigabitEthernet0/0/0ip add 192.168.23.2 24R3-GigabitEthernet0/0/0Mar 8 2017 14:01:20-08:00 R3 %01IFNET/4/LINK_STATE(l)0:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. R3-GigabitEthernet0/0/0unR3-GigabitEthernet0/0/0undo shR3-GigabitEthernet0/0/0undo shutdown Info: Interface GigabitEthernet0/0/0 is not shutdown.R3-GigabitEthernet0/0/0qR3R3R3R3int g0/0/1R3-GigabitEthernet0/0/1ip add 192.168.2.254 24R3-GigabitEthernet0/0/1Mar 8 2017 14:04:49-08:00 R3 %01IFNET/4/LINK_STATE(l)2:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. R3-GigabitEthernet0/0/1R3-GigabitEthernet0/0/1unR3-GigabitEthernet0/0/1undo shR3-GigabitEthernet0/0/1undo shutdown Info: Interface GigabitEthernet0/0/1 is not shutdown.R3-GigabitEthernet0/0/1qR3R3dis ip int br*down: administratively downdown: standby(l): loopback(s): spoofingThe number of interface that is UP in Physical is 3The number of interface that is DOWN in Physical is 1The number of inter