director常用语言.doc

跳转到某一幀：go to frame 在某一帧暂停：go to the frame跳转到某个影片：play movie “*”在第一帧处循环播放：go to frame 1退出：quat()前进和返回命令：on exitFrame me go to the frameendon mouseUp go to the frame+1end mouseUpon rightMouseUp go to marker(-1)end rightMouseUpon keyUp go to the frame+1end keyUpon rightMouseDown meend暂停命令on exitframe mego to the frameend前进到指定点播放on mouseup mego to Xend当招标进入的时候,前进指定点播放on mousewithin mego to Xendon mouseleave mego to Xend停止 on exitframe me go to the frame end前进 on mouseup（左健点击）me go to the frame 1 end后退 on rightmouseup（右健点击） me go previous end进入 on mousewithin me go to X end离开 on mouseleave me go to X endon mousewithin me go to Xend（经过时到X）on mouseleave me go to Xend（离开时回到X）on mouseDown me w= sprite(1).width h=sprite(1).height sprite(1).width=w/2 sprite(1).height=h/2 end(点鼠标左键成培缩小）on rightmouseup me w=sprite(1) .width h=sprite(1).height sprite(1).width=w*2 sprite(1).height=h*2 end(点鼠标右键成培放大）continue(继续）pause(暂停）on exitframe me go loopend(使电影实现循环播放）on keydown case (the key) of f: go to 1 end case end keydown(当按下F键返回到第一帧）on keydown go to 1 end keydown(当按下任意键返回到第一帧）on mouseUP me pause (暂停）on rightmouseUP me play frame(任意键循环)/continue(继续）on rightmouseUp me go previous(去前一个)end倒数计时器的语句（3分钟计时) global timerminuteglobal timersecondon settime set total=(3*3600- the timer)/60 set timerminute=total/60 set timersecond=total-timerminute*60endon changesprite set m1=timerminute/10 set m2=(timerminute-m1*10) set s1=timersecond/10 set s2=(timersecond-s1*10) set the member of sprite 6 to member(m1+90) set the member of sprite 7 to member(m2+90) set the member of sprite 8 to member(s1+9