WLAN设备维修作业指导手册.doc

WLAN设备维修作业指导手册 WLAN设备维修作业指导手册版本：V1.1日期：2013-7 部门：逆向物流部为了帮助大家更好升入WLAN设备的维修工作，特写了这份操作指南，下面分成两大部分来介绍：第一部分 FTP的设置对设备升级前先要对FTP软件进行设置。【第一步】设置本地计算机的IP地址。右键点击网上邻居，选择属性，出现如下对话框：如上图，点击属性，在出现的对话框中单击常规Internet协议（TCP/IP），选中Internet协议（TCP/IP），点击属性，出现如下对话框：按照上图设置好IP地址和子网掩码，IP地址是可以任意设置的，前提是要与所要升级的AP设置在同一个网段中。【第二步】双击如图，启动FTP服务器，如下图：首次使用时，需要做配置。【首先】单击，在弹出的对话框中输入FTP登陆的用户名，单击ok后将会弹出一个对话框，单击取消。【其次】选中所建立的用户名，在上图中右侧的General选项中输入FTP的登陆密码。【再次】单击中的浏览框中建立上传升级程序的文件夹。并将下的五个选项框勾打上勾。备注：升级程序文件必须放在所建立的文件夹中，不能把升级文件放在文件夹中，再把这个放了升级程序的文件夹再放在刚才建立的文件夹中。【最后】单击进行应用。每次启用程序时，都需要单击图标，以启用FTP。第二部分 软件升级减瘦软件升级前需要准备的工具：1、 串口线（设备已配），如果用来升级的计算机不带串口，需要配置一根USB转RS232串口的转接线一根；2、 网线一根，用于一端连接AP设备的网口，一端连接计算机的网口；3、 电脑一台。将AP设备与计算机连接好，打开【开始】【所有程序】【附件】【通讯】【超级终端】在名称中随意输入一个名称，单击确定，弹出如下对话框：在连接使用下拉菜单中选中选择所使用的COM口，单击确定，弹出如下对话框：然后单击值，再单击确定按钮。按Enter键，在超级终端的界面上可以看到如下信息： %Apr 26 12:14:33:288 2000 H3C SHELL/4/LOGIN: Console login from con0 拔电源，会出现如下启动信息*system start booting.Version 2.08Ext not Exist, But Flag is invalid!. * * * * H3C WA1208E BootWare , Ver 2.08 * * * * Copyright(c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. and its licensors. Compiled date : Aug 25 2008, 17:29:01 CPU type : IXP422 CPU L1 Cache : 16KB CPU Clock Speed : 266MHz Memory Type : SDRAM Memory Size : 64MB Memory Speed : 133MHz BootWare Size : 512KB Flash Size : 8MB HardWare Version is Ver.APress Ctrl+B to enter extended boot menu. /在出现该提示时按Ctrl+B，只有一秒钟的时间 Please input BootWare password: /密码为空，直接回车=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Enter your choice(0-9):9 /设置设备工作模式=| Display Current Device Model | Set The Device Into FIT AP Model | Set The Device Into FAT AP Model | Exit To Main Menu =Enter your choice(0-3):2 /将设备切换为FIT模式.FAT AP Mode setting successfully.=| Display Current Device Model | Set The Device Into FIT AP Model | Set The Device Into FAT AP Model | Exit To Main Menu =Enter your choice(0-3):0=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Ctrl+Z进入隐含菜单Hidden menu.=|Note:the operating device is Flash | Enter Debugging Environment | Format Current Device | SDRAM Test | Write Atheros Radio Data | Into LWAPP Sub-Menu | Upload Current Device Contents Via Net | Enter Ethernet SubMenu for V3 BigPacket | Exit To Main Menu |=Enter your choice(0-7):2 /在此菜单下只允许进行格式化flash的操作 Warning : All things will lost in FLASH! Are you sure to format FLASH? Yes or No (Y/N): yBegin format FLASH.Format Flash Success=|Note:the operating device is Flash | Enter Debugging Environment | Format Current Device | SDRAM Test | Write Atheros Radio Data | Into LWAPP Sub-Menu | Upload Current Device Contents Via Net | Enter Ethernet SubMenu for V3 BigPacket | Exit To Main Menu =Enter your choice(0-7):0=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Enter your choice(0-9):3 /修改Eth参数=|Note:the operating device is Flash | Download Application Program To SDRAM And Run | Update Main Application File | Change Ethernet Parameter | Exit To Main Menu | =Enter your choice(0-3):3Note: Two protocols for download, tftp & ftp. You can modify the flags following the menu. tftp-0x80, ftp-0x0. = clear field; - = go to previous field; D = quitboot device : ixe1 /无需更改，直接回车processor number : 0 /无需更改，直接回车host name : host /无需更改，直接回车file name : wa1208_fit.bin /输入要升级的文件名称inet on ethernet (e) : 1 /AP设备的地址，与本机地址在同一网段inet on backplane (b): 00 /无需更改，直接回车host inet (h) : /本机地址gateway inet (g) : /无需更改，直接回车user (u) : min /FTP用户名ftp password (pw) (blank = use rsh): 123456 /FTP账号密码flags (f) : 0x0 / tftp标识符0x80, ftp标识符0x0target name (tn) : wa1208_fit.bin /目标文件名startup script (s) : /无需更改，直接回车other (o) : /无需更改，直接回车=|Note:the operating device is Flash | Download Application Program To SDRAM And Run | Update Main Application File | Change Ethernet Parameter | Exit To Main Menu | =Enter your choice(0-3):2 /升级版本boot device : ixe /无需更改，直接回车unit number : 1 /无需更改，直接回车processor number : 0 /无需更改，直接回车host name : host /无需更改，直接回车file name : wa1208_fit.bin /无需更改，直接回车inet on ethernet (e) : 1 /无需更改，直接回车inet on backplane (b): 00 /无需更改，直接回车host inet (h) : /无需更改，直接回车gateway inet (g) : /无需更改，直接回车user (u) : min /无需更改，直接回车ftp password (pw) : 123456 /无需更改，直接回车flags (f) : 0x0 /无需更改，直接回车target name (tn) : wa1208_fit.bin /无需更改，直接回车 Attaching network interface lo0. done.Loading.Done!4336872 bytes downloaded.Update Success!=|Note:the operating device is Flash | Download Application Program To SDRAM And Run | Update Main Application File | Change Ethernet Parameter | Exit To Main Menu | =Enter your choice(0-3):0=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Enter your choice(0-9):0 /重新启动 Please make sure: the baud rate on the PC side is set to 9600 bps after reboot Rebooting.system start booting.Version 2.08 There is no file system in the device * * * * H3C WA1208E BootWare , Ver 2.30 * * * * Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors. Compiled date : Feb 12 2009, 15:41:13 CPU type : IXP422 CPU L1 Cache : 16KB CPU Clock Speed : 266MHz Memory Type : SDRAM Memory Size : 64MB Memory Speed : 133MHz BootWare Size : 512KB Flash Size : 8MB HardWare Version is Ver.A Application program does not exist.Press Ctrl+B to enter extended boot menu. Attaching network interface lo0. done. Trying to get the IP address from the DHCP server.在出现该界面后，拔电重启system start booting.Version 2.30 There is no file system in the device * * * * H3C WA1208E BootWare , Ver 2.30 * * * * Copyright(c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. and its licensors. Compiled date : Feb 12 2009, 15:41:13 CPU type : IXP422 CPU L1 Cache : 16KB CPU Clock Speed : 266MHz Memory Type : SDRAM Memory Size : 64MB Memory Speed : 133MHz BootWare Size : 512KB Flash Size : 8MB HardWare Version is Ver.A Application program does not exist.Press Ctrl+B to enter extended boot menu. /在出现该提示时按Ctrl+B，只有一秒钟的时间 Please input BootWare password: /密码为空，直接回车=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Enter your choice(0-9):9=| Display Current Device Model | Set The Device Into FIT AP Model | Set The Device Into FAT AP Model | Exit To Main Menu =Enter your choice(0-3):2.FIT AP Mode setting successfully.=| Display Current Device Model | Set The Device Into FIT AP Model | Set The Device Into FAT AP Model | Exit To Main Menu =Enter your choice(0-3):0=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Modify BootWare Password | Ignore System Configuration | BootWare Operation Menu | Clear Super Password | Device Operation | Reboot =Enter your choice(0-9):Ctrl+Z进入隐含菜单Hidden menu.=|Note:the operating device is Flash | Enter Debugging Environment | Format Current Device | SDRAM Test | Write Atheros Radio Data | Into LWAPP Sub-Menu | Upload Current Device Contents Via Net | Enter Ethernet SubMenu for V3 BigPacket | Exit To Main Menu =Enter your choice(0-7):2 Warning : All things will lost in FLASH! Are you sure to format FLASH? Yes or No (Y/N): yBegin format FLASH.Format Flash Success=|Note:the operating device is Flash | Enter Debugging Environment | Format Current Device | SDRAM Test | Write Atheros Radio Data | Into LWAPP Sub-Menu | Upload Current Device Contents Via Net | Enter Ethernet S