X70FTB3-X70F_Download_Image_Flash_Tool_SOP_V12

TB3-X70F Download Image SOPPrecondition:Note: The step is according Win7, XP system and vista is similar. Not support for Win8.1. Preparatory workStep1: Download tool (SP_Flash_Tool_exe_Windows_v5.1612.00.000), driver (Hua Qin Android Driver All-in-One.rar) and the Image from FTP.Step2: unzip them respectively.2. Install USB driverStep1: Open the folder “Hua Qin Android Driver All-in-One”, choose the correct one which is same as your computer system type (32bit or 64 bit) to install.Step2: If your computer is 32 bit, then open the 32bit folder, and double-click the Huaqin Android Driver All-in-One 32 bit V1.00.exe to install the drive (the 64 bit is the same),and it will show “Preparing to Install”.Step3: click next Step4：Click InstallStep5：InstallingStep6：During the installing, the computer may pop-up warning, you should choose the second- “Install this driver software anyway”. Win7 Step7：Complete, click “Finish”3. Flashing image Step1: Launch Flash_tool.exe (Version: SP_Flash_Tool_exe_Windows_v5.1612.00.000, MTK always keeps updating the flash tool; suggest you use the latest formal version). (Note: This first time open the application will show as the picture below. It is normal. Press OK.)The First pic as below:“Download-Agent” select the image (“DA_SWSEC.bin”) Which is in the “SP_Flash_Tool_exe_Windows_v5.1612.00.000” Folder.Step2: “Scatter-loading file” select the image (“MT6735_Android_scatter.txt”) which you have unzipped in the “Preparatory work” step and open it. Step3: After loading, select the download mode to Firmware Upgrade , and then click “Download” button.Step4: Power off the tablet, press the volume up key (until enter the “Download Flash” mode), then connectting to PC via USB cable.Step5: On PC side, Flash tool will automatically enter the flash mode.Step6: Once below dialog display, the flash success. You can disconnect the tablet from PC, and power on it via long press power key.Now, the whole process have finished.Thanks!Check software version