二级公路设计优秀毕业设计中英文摘要.doc

青岛理工大学毕业设计(论文）摘 要本设计根据给定的资料；通过对原始数据的分析；根据该路段的地形、地质、地物、水文等自然条件；根据公路工程技术标准、公路路线设计规范等交通部颁发的相关技术指标，在老师的指导和同学的帮助下完成的。设计内业详细资料有：路线设计，包括纸上定线、绘制路线平面图、路线纵断面设计；路基设计，完成五公里横断面和路基土石方的计算及路基排水设计；路面设计，沥青混凝土路面设计；小桥涵设计；设计概预算编制，完成全线设计路段的初步设计概算；施工组织设计；应用计算机绘制工程图，按老师的指导和要求完成。整个设计计算了平、纵、横要素，设计了路基、路面、小桥涵等内容，通过这次设计了解了公路设计流程。由此圆满完成了菏泽至定陶二级公路的设计。本设计为微丘区二级公路，设计车速为 80。设计全长5250m，双向两车道，采用二级公路整体式断面标准，设计年限为12年。该工程计划于2012年4月1日起施工到2012年7月26日完成竣工验收，历时117天。关键词： 二级公路 线形设计 路面路基 沥青 施工组织设计 工程造价AbstractThis design according to the given information,through the analysis on the original data,according to the sections of the terrain, geology, terrain, hydrology and other natural conditions;According to technical standard of Highway Engineering, code for design of highway route, issued by the Ministry of transportation related technical indicators, the guidance of the teacher and students with the help .Design interior details : route design, including paper location, drawing the route plan, route vertical section design;The roadbed design, to complete the five km cross sectional and Subgrade Earthwork Calculation and drainage design; design of pavement, asphalt concrete pavement design;Small bridge culvert design; design budget, complete all sections of the initial design budgetary estimate of design; construction organization design; application of computer drawing, according to the teachers guidance and requirements.The design and calculation of the horizontal, longitudinal, transverse elements, design of roadbed, road, bridge and culvert, etc., through this design about highway design process. The successful completion of the Heze to Dingtao two highway design.The design for the hilly area two highway, the design speed of80km / h. Design of full-length5250m, two-way two driveway, using two stage highway integral standard section, design life of 12 years.This project plans in April 1, 2012August 26, 2012 to complete the construction completion and acceptance, which lasted 117 days.Key words: Two stage