打包箱技术规范(中英文).pdf

Technical Specification for Flat-packed Module Housewith Pre-painted Steel Skinned Sandwich Wall Panels彩钢夹芯板型打包式箱房的技术规范General概述The following description refers to the specification of Flat-packed Module House with Pre-painted Steel Skinned Sandwich Wall Panels.以下描述适用于彩钢夹芯板型打包式箱房（以下简称打包箱）的技术规范Flat-packed Modular House matches ISO dimensions and have the advantages of international transport. The construction is based on a stable frame and interchangeable wall panels.打包箱符合 ISO 尺寸，在国际运输中具有优势。由稳定的钢构和可互换的墙板组成The individual modular houses can be stood side-by-side in longitudinal and transverse direction without limits. It also can be stacked to 3 stories height on top of each other. Individual sizes of space can be achieved by removing outer wall panels and fitting partitions.每个单体打包箱都可随意纵横排列组合，并且能够堆叠至三层。通过移除外墙板和设置隔 墙，可以获得任意尺寸的空间The flat-packed modular houses can be delivered assembled or individually in packages 647mm high.打包箱能够整箱运输，也可以打包运输打包成 647mm 高Standard measurements and weights of flat-packed Modular House:打包箱的标准尺寸和重量：External dimensions (mm)Internal dimensions (mm)外尺寸（mm）内尺寸（mm）Weights (kg)LengthWidthHeightLengthWidthHeight重量（kg）长度宽度高度长度宽度高度6058243828005856223625051970Flat-packed Modular House can also be delivered in dimensions which are exactly adapted to the individual use or to the available space.打包箱也可以根据个人需求和实际可用空间进行尺寸定制SPECIFICATION DETAILS:具体规范：1) BASE 底框:Frame construction: 4mm cold rolled steel profiles, 3mm cold formed cross members welded together into a rigid ladder frame with forklift grooves and bottom corner fittings框架结构：4mm 厚冷弯型钢，3mm 厚冷弯成型底横梁与叉车槽和底角件一起焊接成一个 坚固的梯状框架Bottom corner fittings: 4 welded bottom corner fittings with dimensions according to ISO standard 1161, Specification of Corner Fittings (1984 Edition).底角件：尺寸符合 ISO 1161 标准-角件规范（1984 版），焊接而成Forklift grooves: two 88x355mm forklift grooves spaced 1250mm o.c. in the base frame-construction.叉车槽：两个尺寸为 88x355mm 的叉车槽，间隔 1250mmFloor: 18 mm high density fiber cement board, and 1.6 mm vinyl floor finishing with burning behaviour class B and welded seams, bonded together by environment friendly water-based adhesive.地板：18mm 高密度水泥纤维板，与 1.6mm 防火等级 B 的 PVC 地板革及地板革焊线通 过环保的水基地板胶粘接在一起In wet area, such as sanitary, the vinyl floor finishing is laid to floor and approx. 50 mm up each wall，all seams being welded.在湿区，比如洁具处，PVC 地板革铺到地板边缘侧板处，需要翻起大约 50mm 贴在侧板 上，接缝处焊接Insulation:100mm rock wool slabs with density 50kg/m and burning behaviour classA1底保温：100mm 岩棉块，密度 kg/m，防火等级等级 A1 Sub-floor: 0.5 mm galvanised steel sheet.底封板：0.5mm 镀锌钢板Load bearing capacity:2.00 kN/m living load.底部荷载：2.00 kN/m活载 K-value 导热系数: 0.45 W/mK.1Floor frame bottom side rail7Floor screw 6x35 mm底框底侧梁地板螺钉 6x35 mm20.5 mm galvanised steel sheet81.6 mm vinyl floor finishing0.5mm 镀锌钢板（底封板）1.6mm 聚氯乙烯地板革34.8X12 Rivet for fixing sub floor9slide-rail profile, punched4.8X12 固定底封板的铆钉带孔侧板滑轨4Insulation 100 mm rock wool10Baseboard保温100mm 岩棉踢脚线5vapour barrier 80 m PE foil11Wall panel防潮80 m PE 膜墙板618mm fiber cement board18mm 水泥纤维板2) ROOF 顶框Frame construction: 4mm/3mm cold rolled steel profile welded with top container fittings as roof frame.顶部钢构：4mm 和 3mm 厚冷弯型钢与角件焊接而成Top corner fittings: 4 welded top corner fittings with dimensions according to ISO standard 1161, Specification of Corner Fittings (1984 Edition).顶角件：尺寸符合 ISO 1161 标准-角件规范（1984 版），焊接而成Connection for external power supply:Sunken in the front of roof frame外部电源接入：埋入顶框前端Roof covering:1.5 mm SPA-H panel welded with roof rail外顶板：1.5mm SPA-H 集装箱屋顶和顶梁焊接Ceiling covering: Pre-painted steel skinned sandwich panel with 50mm rock wool core内顶板：50mm 岩棉夹芯板，基材为双面 0.5mm 彩钢板Insulation: 60mm rock wool slabs with density 50kg/m . The roof frame is also insulated with glass wool slabs (density 16 - 24 kg/m)保温：60mm 岩棉块保温，密度 50kg/m。顶梁保温用玻璃棉块，密度 16 - 24 kg/m。Load bearing capacity:2.00 kN/m living load.顶部荷载：2.00 kN/m 活荷载 K-value K 值: 0.40 W/mK.1 Roof frame-top side rail 顶侧梁2 Rail insulation梁保温3 Exterior panel-container roof 外顶板4 Insulation-rock wool 60 mm顶保温5 Pre-painted steel skinned SandwichPanel with 50mm rock wool core 内顶板3) CORNER POSTS: 角柱Profile: 4.0 mm Cold rolled steel profile, dimension 152/210 mm. 外形尺寸：4.0mm 冷弯钢型材，两侧边尺寸 152、210mmFitting: The four corner posts are connected with the base frame and the roof frame with bolts. In this manner, Flat-packed Modular Houses are collapsible and can be transported in packages.安装：四个角柱通过螺栓与顶底框连接。通过这种方式，打包箱将可拆卸并打包运输Drainage: Rainwater will be drained through four seamless PVC-downpipes which are fitted into the corner posts, 50 mm.排水：雨水将通过四个设在角柱里的直径 50mm 落水管排出Insulation: The corner posts are insulated with glass-wool slabs (density 16 - 24 kg/m)保温：角柱通过内置玻璃棉块（容重 16 - 24 kg/m）进行保温1Corner post Steel profile6Insulation glass wool角柱型钢保温玻璃棉2Insulation glass wool750mm PVC downpipe保温玻璃棉50mm PVC 落水管33x20 mm cellular rubber sealing8PVC Edge capping3x20 mm EPDM 防水胶条PVC 角柱阴角线4M6x25 self-drilling screw9Wall panelM6x25 自攻螺钉墙板5Check block侧板挡块4) WALL PANELS 墙板:Exterior cladding:0.5 mm galvanised and pre-painted steel profile,外墙面：0.5mm 镀锌彩涂钢板Interior cladding:0.5 mm galvanised and pre-painted steel sheet,内墙面：0.5mm 镀锌彩涂钢板Insulation: 70mm rock wool with density 110kg/m. 隔热：70mm 岩棉，密度 110kg/mPermitted loading:0.50 kN/m允许载荷：0.5 kN/mK-value 导热系数:0.6 W/mK.Options 可选项:Panel number 侧板数量: 14, they are fully interchangeable 完全可互换 Effective panel width 有效插接宽度: 1138mmPanel thickness 侧板厚度:70mm10.5 mm galvanised and pre-painted steel profile370mm rock wool core0.5mm 镀锌彩涂钢板70mm 岩棉填充20.5 mm galvanised and pre-painted steel sheet4EPS block0.5mm 镀锌彩涂钢板EPS 块7) WINDOWS/TWO SETS 窗/两套:White PVC window frame 875 x 1335 mm, glazed with double hollow glass (4+9+4mm), with single handed tilt and swing mechanism, supplied with white external aluminium rolled shutter in guide.窗户尺寸 875 x 1335 mm，白色 PVC 窗框，双层中空玻璃(4+9+4mm)，内开内倒窗，提供白色外置铝百叶窗8) EXTERIOR DOORS/ONE SET 外门/一套:Aluminium door frame 830x2035mm, and door leaf consisted of double pre-painted metal skinned sandwich panel with 40mm polystyrene foam core, furnished with a cylinder lock with 3 keys. Net opening dimension 755x1985.5mm铝合金门尺寸 830 x2035mm，门板由两张彩涂钢板和 40mm 聚苯乙烯发泡填充组成，提 供圆筒销子锁，配三把钥匙。开门尺寸 755x1985.5mm9) SURFACE PRESERVATION 表面处理:All steel parts will be electrogalvanized coated in the thickness of 10m所有主体钢构进行 10m 厚电镀锌处理10) Painting/coating 油漆/涂装:Primer 底漆:Zinc phosphate Epoxy 环氧富锌底漆30mTop coating 面漆:Acrylic top coating 丙烯酸面漆40mTotal dry film thickness 干膜厚度:70m11) ELECTRICAL INSTALLATION 电气装置:Electric cabling is concealed. All parts fulfil VDE 100 regulation or other European norms.电路暗装。所有部分满足 VDE100 标准或其他欧洲标准Technical data 技术参数:Voltage 电压:220/380 V, 50 HzExterior: CEE Connection supplying sunken in the roof frame, 3 pole/32A or 5 pole/32A socket and plug外部：工业插座沉入顶框，3 芯/32A 或是 5 芯/32A 插头和插座Interior: Wall-sockets, light switch, and double fluorescent lamps 2x36 W内部：墙板插座，灯具开关，两盏 2x36 W 荧光灯Distribution enclosure with 配电箱包含以下电路配件: Residual current circuit breaker 漏电断路器 40/4E-0,03 A 1x10 A circuit breaker 断路器 (light 灯)1x16 A circuit breaker 断路器 (electric heater 电暖器) 1x16 A circuit breaker 断路器 (air-condition 空调) 1x16 A circuit breaker 断路器 (wall-sockets 墙板插座)Earthing 接地:1 stainless steel bolt M8x20 welded on the base frame一个 M8x20 的不锈钢螺栓焊接在底框It is the responsibility of the buyer/lessee to arrange for the earthing installation on site.由甲方/承租商需负责现场的接地安装Remark 备注:Number and arrangement of electrical accessories will be according to the attached drawing of standard modular house type.电气设备的数量和排布以最终确认的图纸为准12) SITING AND ERECTION 选址和搭建:Any individual modular house should al