WOHA33_5671Additional Package54_30_AT-252200-210-803

Hong Kong Airlines Limited香港航空有限公司F-D-099Hong Kong Airlines MEDHong Kong Airlines LimitedWO NO/工作指令号SEQ NO/序列号WOHA335671_30_54567154Training and Qualification/培训和资格Technical Record/技术记录NONENONETitleOperational Check of Seat Belts (including Harness Roll-Up Mechanism)Mcd&Rev/厂家工卡&修订日期标题操作检查安全带（包括卷起机构）AMM TASK 25-22-00-210-8032019-01-01A/C/飞机号Subtask No/工卡号JC Rev/工卡版本号Workarea/工作区域Skill/工种Man Hour/工时BLNTAT-252200-210-803HR003010客舱/CabinTRIM0.4MP Item/MP号Baseline/依据MP REV/ MP版本号Station/维修站Threshold/首检Interval/重复检HA33-252200-03-1MPD 252200-03-1,MRB 25.22.00/03,MEETING NO.:TSMT2014012ISS 3 REV 1SHA1095 CA1095 CAAccess Panels/接近盖板Zones/区域Written/编写Approved/批准NONE2002019-03-202019-03-20TOOLS/工具TOOLS NECESSARY/必须工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注TOOLS IF NECESSARY/视情工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注PARTS AND MATERIAL/航材NOTE:OPERATOR MUST GET AND INSTALL THE PARTS THAT CORRESPOND TO THE RELATIVE WORKORDER NO.注释：请工作者严格按照工作指令号领取预定的航材装机PARTS AND MATERIAL NECESSARY/必须航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注PARTS AND MATERIALIF NECESSARY/视情航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注118-0100K0KZN-10RESTRAINT SYSTEMAS5ALL(视情/As Necessary)IMPORTANT NOTE:In the event of any discrepancies between the Chinese instruction and the English instruction, the English procedure should prevail.Record Additional Work/Findings(If Applicable) Reference No. Certificate of Release to Service (* Tick as appropriate # Different crews should perform the work on each of the systems)Certifies that the work specified, except as otherwise specified, was carried out in accordance with HKAR-145and in respect to that work, The aircraft / aircraft components are considered ready for Release to Service. HKA Approval No: AI / 135 / 706 * HKE Approval No: AI /218/1215, JMM 133 * HNAT Approval No.: D.101115, JMM 047* CASL Approval No: AI / 101 / 798 * AMECO Approval No.: D100001, JMM 001* HNAT- North West Approval No.: D.500023, JMM 049 * HAECO Approval No: DAI / 1 / 853 * SMECO Approval No.: D.400009, JMM 081* HNAT- YN Approval No.: D.4108, JMM 134 * TAECO Approval No.: DAI / 89 / 1295 * CEA Approval No.: D.200002, JMM 112 * HNAT Approval No.: D.3039, JMM 076 * THAECO Approval No.: D.101661, JMM 124 * CEA-Jiangsu Approval No.: D.200047, JMM 117 * SPRING Approval No.: D.200081, JMM 121 * SIAEC Approval No: AWI / 01 * STARCO Approval No.: D.200078,JMM 039* GAMECO Approval No.: D.300001, JMM 006* THAI Approval No.: AI / 147 / 0910 * Other: *Signature:_ Authorization No.:_ Date:_AT-252200-210-803 HR003010 W/O:5671 AC:BLNT页码：2 / 9工卡Job card:HA33-252200-03-1TITLEOperational Check of Seat Belts (including Harness Roll-Up Mechanism)PerfInsp标题操作检查安全带（包括卷起机构）工作者检查者1. Job Set-up/开始工作Subtask25-22-00-861-054-AA. Energize the ground service network (Ref. AMM TASK 24-42-00-861-801) . M 接通飞机地面勤务电源(Ref. AMM TASK 24-42-00-861-801)。 2. Procedure/步骤Subtask25-22-00-710-051-AA. Operational Check of the Cabin-Attendant Seat Belts (with the Harness Roll-Up Mechanism) T 操作检查客舱乘务员座椅安全带(伴有卷起机构)(Ref/参考.Fig.Seat Belts - Cabin Attendant Seat) (1) For the location of this componetr,refer to .对于部件的位置，请参考(2) Do an operational check of the cabin-attendant seat belts(with the harness roll-up mechanism):操作检查客舱乘务员座椅安全带（包括卷起机构）(a) Pull on the shoulder harness and make sure that it extends smoothly and fully.拉上肩带，确保它平稳而充分地伸展。(b) Release the shoulder harness and make sure that it moves automatically into the reel. 松开肩带确保它能自动收回到卷轴。(c) Pull out the shoulder harness with sudden movement at different positions along its full length. Make sure that the automatic inertia reel cause the stop of the shoulder harness movement.在不同位置突然拉动肩带至足够长度，确认自动惯性卷轴可以停止肩带的运动。 (d) Release the tension on the harness and make sure that is unlocks.释放肩带的张力并确定解锁。 (e) Engage the harness connector into the seat belt buckle. 将安全带接头和锁扣连接。(f)Turn the cap of the seat belt buckle to the left or right to disengage the harness connector. 向左或向右转动安全带锁扣的盖子以便于松开安全带接头。(g) Make sure that the operation of the seat belt buckle is correct.确保正确操作安全带锁扣。3. Close-up/工作结束 Subtask25-22-00-210-061-A A. Make sure that the area is clean and clear of tools and other items.确保该区域清洁，没有工具和其他物品。Subtask25-22-00-862-053-AB. De-energize the ground service network (Ref. AMM TASK 24-42-00-862-801) M 断开飞机地面勤务电源(Ref. AMM TASK 24-42-00-862-801)。AT-252200-210-803 HR003010 2019-03-20页码，3 / 9工卡Job card:HA33-252200-03-1TITLEOperational Check of Seat Belts (including Harness Roll-Up Mechanism)PerfInsp标题操作检查安全带（包括卷起机构）工作者检查者* ON A/C CHH ALL ON A/C CRK 001-300, 351-500 * ON A/C CHH ALL ON A/C CRK 001-300, 351-500* ON A/C CRK 305-350 ON A/C HKC ALL* ON A/C CHH ALL ON A/C CRK 001-300, 305-500ON A/C HKC ALL* ON A/C CHH ALL ON A/C CRK 001-300, 305-500ON A/C HKC