TO CUSTOMER完成BLNY BSI REPORT

Borescope Inspection ReportThis report should be provided in MS Word or PDF format in 24 hrs following inspection. If there is abnormal finding*, HKA MCC should be notified immediately. Contracted MRO can use this report template for borescope inspection they peformed on HKA aircraft. Please Enter N/A if the item is not applicable.Date27 SEP 2016Project IDHKA/BLNY/A/16OperatorSTARCO(PVG)Aircraft RegistrationB-LNYEngine TypeTRENT700(T772B-60/16)Engine Position2#ENGEngine Serial Number (ESN)41763Original Work Card No.AT-720000-200-818Routine or Non-RoutineROUTINENon-Routine ReasonN/AInspection AreaBOROSCOPE INSPECTION OF COMBUSTION LINERAMM Inspection Reference AMM 72-00-00-200-818Inspection Conclusion please refer to Inspection finding for damage detailsNO DAMAGE FOUNDInspector NameHUANG YE CHUANSignatureNote: Borescope Inspector or Certifying Staff shall raise NRC, or ADD, or BDD to record abnormal finding* and the follow-up actions. NRC/ADD/BDD No.N/AApproved Maintenance Data Acceptance ReferenceN/AFindings Record Details: If no abnormal finding* is noted, sufficient overall/general condition view photos should be taken and attached/inserted to below finding columns of this report. The photos should show inspected area as much as possible. If abnormal finding* is noted, detail photos for the abnormality/damage should be taken and provided with BSI equipment measured dimensions.Finding 1- Details in Text (Including justification against approved maintenance data acceptance criteria): Finding 1- Insert Sufficient Photos Here: Finding 2- Details in Text (Including justification against approved maintenance data acceptance criteria): Finding 2- Insert Sufficient Photos Here:If there are more findings to be reported, more finding columns can be added.Inspection Result passed toHKA TSNOTES:* Normal finding - means “no damage”, or “minor damage” within approved maintenance acceptable limit without interval reduction and other follow up action, inspector should take enough/sufficient photos to show general condition of the component he/she inspects, the photos should cover most of area he/she inspected. Abnormal finding - means any damage that requires to reduce inspection interval or other follow up action, apart from sufficient photos to show the general condition, inspector shall take detail photos for the damage, including dimension details measured by the borescope equipment, the necessary dimensions are essential as they are used for justification against the acceptance criteria in approved maintenance data. Since this type of abnormal