tesla Model S充电协议_第1页
tesla Model S充电协议_第2页
全文预览已结束

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

TESLA充电协议It is almost certain (from what Tesla have said publicly and from the practicalities of the connectors used) that Model S uses the J1772-DC signalling. This is the same signalling as specified for the Type2 connector in DC mode.这几乎是确定的(从tesla公开的宣传和所使用的连接件),Model S使用了J1772DC信令,这与Type2连接器在DC模式的信令是相同的。DC mode starts by the EVSE driving the pilot signal at 5% duty cycle (10% is the minimum used to signal AC current - 10% - 6A AC, 96% - 80A AC). Car and EVSE then establish a communication channel using an RF carrier superimposed on the pilot pin. This is confusingly described as Power Line Carrier since it uses the same modulation etc. as the Homeplug system for data over mains wiring, but in this case it isnotusing the J1772/type2 power pins! This subset of HomePlug is known as GreenPhy and is used for various other applications such as Smart Meters.直流模式开始,充电设备输出占空比为5%的导频信号(10%用于最小交流电流信号,10%表示6A,96%表示80A),充电设备与汽车之间利用加载在导频信号上的RF载波建立通信信道,这里用“电力线载波”来描述比较不恰当,但是使用的是同样的调制等,在Homeplug系统中,数据是加载在电源线上,但是在这里,它使用的不是J1772/Type2的电源脚!这个Homeplug的子集是已知的Green PHY,它用于其它的应用如智能仪表。Having established this data link, car and charger communicate details of the charging session using a high level XML protocol specified in the SAE/IEC documents.建立了这个数据连接,汽车与充电设备之间进行详细的充电进程通信,期间使用的是高级别XML协议 ,这个协议在SAE/IEC有文档说明Thus it can be easy to select DC mode if its just a 5% duty cycle PWM, but the PLC modulation is the problem. Yes its possible to find chip or module to do the modem low level layer, but the problem will probably be on the high level communication protocol, its pretty sure that Tesla implemented a proprietary data exchange between the car and the supercharger. And I see that PLC/greenphy chip always embeds AES128 cryptography capability, thus all data exchange are probably encrypted. This way they can be sure nobody can use their supercharger with another car and diy adapter cable.因此,使用5%占空比的PWM脉冲可以容易的进入直流模式,但是PLC调制是问题,找到芯片与模块做低级别的调制比较简单,但问题可能会出现在高级别的通信协议中,可以很确定,Tesla在汽车与超级充电桩之间加入了专用数据交换,所我所知,PLC/GreenPHY芯片都是嵌入了AES128加密功能,因此所有的数据交换都可以加密,通过这样,他们可以确保没人能用他们的超级充电站给其它汽车充电或DIY适配器With these informations it seems it will be diff

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论