Service Cabin Refresh服务舱翻新HA33-CA-25-12-320

Hong Kong Airlines Limited香港航空03110-01Hong Kong Airlines MEDHong Kong Airlines LimitedWO NO/工作指令号SEQ NO/序列号培训方式通用类/GenericTitleFLOOR COVER REPLACEMENTMcd&Rev/厂家工卡&修订日期标题地板覆盖物更换MEA/C/飞机号Subtask No/工卡号JC Rev/工卡版本号Work area/工作区域Skill/工种Man Hour/工时HA33-CA-25-12-320Rev. 00客舱/CabinTRIM20.0MP Item/MP号Baseline/依据MP REV/ MP版本号Station/维修站Threshold/首检Interval/重复检-4C4CAccess Panels/接近盖板Zones/区域Written/编写Approved/批准NONE2002016-04-112016-04-11TOOLS/工具TOOLS NECESSARY/必须工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注1CML11-010异丙醇（异丙基乙醇)Non Aqueous Cleaner-Isopropyl AlcoholTO3ALL(必需/Necessary)TOOLS IF NECESSARY/视情工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注PARTS AND MATERIAL/航材NOTE: OPERATOR MUST GET AND INSTALL THE PARTS THAT CORRESPOND TO THE RELATIVE WORK ORDER NO.注释：请工作者严格按照工作指令号领取预定的航材装机PARTS AND MATERIAL NECESSARY/必须航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注1448F02120WTAWD1, B/C Lav, Fwd Galleys NTFCH1ALL(必需/Necessary)205850132Solo Bombay Welding RodCHALL(必需/Necessary)3498R6415AVM282 G Solo Bombay Adh 1.5mX30mCHALL(必需/Necessary)4DAN493A05AAirVolt LaminateCHALL(必需/Necessary)5ABS5096AA29-1Seat track coversCHALL(必需/Necessary)6ABS5098AU29-1Cord Welding PVCCHALL(必需/Necessary)PARTS AND MATERIAL IF NECESSARY/视情航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注IMPORTANT NOTE:In the event of any discrepancies between the Chinese instruction and the English instruction, the English procedure should prevail.Record Additional Work/Findings(If Applicable) Reference No. Certificate of Release to Service (* Tick as appropriate # Different crews should perform the work on each of the systems)Certifies that the work specified, except as otherwise specified, was carried out in accordance with HKAR-145and in respect to that work, The aircraft / aircraft components are considered ready for Release to Service. HKA Approval No: AI / 135 / 706 * HNAT Approval No.: JMM 076, D3039 * HNAT Approval No.: JMM 047, D101115* HNAT Approval No.: JMM 049, D500023 * CASL Approval No: AI / 101 / 798 * TAECO Approval No.: DAI / 89 / 1295 * HAECO Approval No: DAI / 1 / 853 * SIAEC Approval No: AWI / 01 * STARCO Approval No.: JMM 039, D.200078 * SMECO Approval No: JMM 081, D.400009 * AMECO Approval No.: JMM001,D101131* Other: * Signature:_ Authorization No.:_ Date:_HA33-CA-25-12-320 Rev. 00 2016-04-11页码，1 / 4工卡Job card:TITLEFLOOR COVER REPLACEMENTPerfInsp标题地板覆盖物更换工作者检查者WARNING: PLEASE OBEY ALL WARNING AND CAUTION OF REFERENCE MANUAL,OTHERWISE IT SHOULD CAUSE PERSONAL INJURE OR DAMAGE TO EQUIPMENT.1. Job set-upNot applicable2. Procedure A. Replace seat track cover per AMM 25-28-00 . B. Replace floor NTF covering at heated floor panelsi) Remove the existing NTF covering per AMM 25-28-00. Salvage existing NTF for step (ii) ii) Local fabricate the NTF and GFRP layers per the existing NTF layer removed. iii) Install the Mylar, GFRP (Laminate) and NTF per AMM 25-28-00. NOTE: See Fig. 2 for typical NTF locations.C. Replace floor NTF covering at lavatory areasi) Remove the existing NTF covering per AMM 25-28-00. Salvage existing NTF for step (ii)ii) Replace the NTF in the lavatories per AMM 25-28-42-960-801-AD. Replace Emergency Exit Pathway Photoluminscent assembliesi) Replace the existing EE Pathway per AMM 33-51-213. Close-upA. Make sure that the work area is clean and clear of tools and other items. B. Return the aircraft to serviceable condition. HA33-CA-25-12-320 Rev. 00 2016-04-11页码，2 / 4工卡Job card:TITLEFLOOR COV