wincc flexible 2005 micro users manual

1、www.PLCPrefaceSIMATIC HMIWinCC flexible 2004 MicroUsers Manual10Transfer11Configuration examples12FeaturesThis users manual is part of the documentation package with the order number 6AV6691-1AA01-0AB0Edition 03/2004A5E00280157-01Project documentation9Structure of multi-lingual projects8Usin

2、g global events7Configuring a connection6Creating an alarm system5Creating screens4Working with tags3WinCC flexible Engineering System2Introduction to WinCC flexible Micro1www.PLCSafety GuidelinesThis manual contanotices which you should observe to ensure your own personal safety as well as

3、to avoidproperty damage. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring to property damage only have no safety alert symbol.Dangerindicates an imminently hazardous situation which, if not avoided, will result in death or seriou

4、s injury.Warningindicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.Cautionused with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.Cautionused without safety ale

5、rt symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.Noticeused without the safety alert symbol indicates a potential situation which, if not avoided, may result in an undesirable result or state.When several danger levels apply, the notices of t

6、he highest level (lower number) are always displayed. If a notice refers to personal damages with the safety alert symbol, then another notice may be added warning of property damage.Qualified PersonnelThe device/system may only be set up and operated in conjunction with this documentation. Only qua

7、lifiedpersonnel should be allowed totall and work on the equipment. Qualified persons are defined as persons whoare authorized to commission, to earth, and to tag circuits, equipment and systems in accordance with established safety practices and standards.Intended UsePlease note the following:Warni

8、ngThis device and its components may only be used for the applications described in the catalog or technical description, and only in connection with devices or components from other manufacturers approved or recommended by Siemens.This product can only function correctly and safely if it is transpo

9、rted, stored, set up and correctly, and operated and maintained as recommended.talledTrademarksAll designations marked with are registered trademarks of Siemens AG. Other designations in this documentation might be trademarks which, if used by third parties for their purposes, might infringe upon th

10、e rights of the proprietors.ACopyright Siemens AG, 2004. All rights reservedReproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registratio

11、n of a utility model or design, are reserved.Disclaimer of LiabilityWe have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in the manual are reviewed regu

12、larly, and any necessary corrections will be includedubsequent editions. Suggestions for improvement are welcomed.Siemens AGAutomation and Drives GroupP.O. Box 4848, D-90327 Nuremberg (Germany) Siemens AG 2004Technical data subject to changeSiemens Aktiengesellschaft6AV6691-1AA01-0AB0www.PLC

13、PrefacePurpose of this manualThis user manual is part of the WinCC flexible Micro documentation. The manual provides you with a complete overview of configuring with WinCC flexible Micro. The manual supports you in creating new projects, in the procedure used during configuration and in transferring

14、 a project to an HMI device.The manual is intended for newcomers, operators and configuration engineers involved inconfiguration, commissioning,tallation and service with WinCC flexible Micro.The help integrated in WinCC flexible, the WinCC flexible Information System, contamoreinformation. The Info

15、rmation System conta information in electronic form.tructions, examples and referenceBasic knowledge requiredGeneral knowledge in the field of automation engineering forms a basic requirement for working with this manual.Users should be firm in handling PCs operating on a Windows 2000 or Windows XP

16、platform.Where this manual is validThis manual is valid for the WinCC flexible Micro 2004 software package.Its place in the information landscapeThis manual is part of the SIMATIC HMI documentation. The information below provides you with an overview of the world of SIMATIC HMI.User manualThe follow

17、ing documents marked with (*) are recommended for understanding the Micro Edition.WinCC flexible Micro (*) describes the engineering basics based on the WinCC flexible Micro engineering systemWinCC flexible Compact/ Standard/ Advanced describes the engineering basics based on the WinCC flexible Comp

18、act, WinCC flexible Standard and WinCC flexible Advanced engineering systemsWinCC flexible Runtime: describes how to commission and operate your Runtime project on a PC.WinCC flexible 2004 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB0iiiwww.PLCPreface WinCC flexible Migration:descri

19、bes how to migrate an existing ProTool project to WinCC flexible.describes how to migrate an existing WinCC project to WinCC flexible.describes how to migrate ProTool projects with an HMI migration from OP7 to OP 77B.describes how to migrate ProTool projects with HMI migration from graphic devices t

20、o Windows CE devices. Communication: Communication part 1 describes the integration of your HMI device into control systems of the SIMATIC family. Communication part 2 describes the integration of the HMI device into control systems of external suppliers.Operatingtructions Operatingtructions for the

21、 HMI devices TP 170micro/TP 170A/TP 170B/OP 170B. (*) Operatingtructions for other HMI devices. Getting startedWinCC flexible for newcomers: based on a practical example, this is a step-by-step introduction to the basics of programming screens, messages, recipes and screen navigation.WinCC flexible

22、for advanced users: based on a practical sample project, this is a step-by-step introduction to the basics of engineering log files, project reports, scripts, user management, multilingual projects and integration into STEP 7.WinCC flexible Options: based on a practical sample project, this is a ste

23、p-by-step introduction to the basics of engineering the options WinCC flexible SmrtServices, SmrtAccess and OPC Server.Online availabilityThe links below guide you directly to the technical documentation pool for SIMATIC products and systems in German, English, French, Italian and Spanish language.S

24、IMATIC Guide Technical Documentation in German: http:/www.ad.siemens.de/simatic/portal/html_00/techdoku.htmSIMATIC Guide for Technical Documentation in English: http:/www.ad.siemens.de/simatic/portal/html_76/techdoku.htmWinCC flexible 2004 Micro Users Manual, Edition 03/2004, 6AV6691-1AA01-0AB0ivwww

25、.PLCPrefaceGuideStructure of this manual:Introduction to WinCC flexible Chapter 2 Working with WinCC flexible Chapters 3 -8Transferring a project to an HMI device Chapter 9Features of WinCC flexible Chapter 10ConventionsA distinction is made in the naming conventions for the configuration an

26、d runtime software:WinCC flexible 2004 designates the configuration software.Runtime designates the Runtime software running on the HMI devices.WinCC flexible Runtime designates the visualization product for use on standard PCs or panel PCs.The term WinCC flexible is used in the general context. A v

27、ersion name such asWinCC flexible 2004 is always used to distinguish other versions thereof. An edition name such as WinCC flexible 2004 Micro is always used to distinguish it from other editions.The following conventions are used in the text and will help you to read the manual more effectively:Ple

28、ase observe the following emphasized notes:NoteNotes containing important information about the product and its handling, or the relevant part of the documentation you should pay particular attention.WinCC flexible 2004 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB0vLayoutRange of validityAd

29、d screen Terminology of the user interface, e.g. dialog names, tabs, buttons, menu commands. Input required, e.g. limit values, tag values. Path specificationFile EditOperating sequence, e.g. menu / context menu commands., Keyboard operationwww.PLCPrefaceRegistered trademarksOther names in t

30、his document could be trademarks, whose use by third parties for their own purposes may constitute an infringement of the rights of the trademark owners.Further SupportRepresentatives and officesIf you have any further questions relating to the products described in this manual, please contact your

31、partner at you local SIEMENS office.You contact partner is found under: /automation/partnerTraining CenterTo familiarize you with automation systems, we offer a variety of courses. Please contact your regional training center, or the central Training Center in D-90327 Nuremberg.

32、Phone: +49 (911) 895-3200.Internet: Service & Support on the InternetThe online services of SIEMENS Service & Support also offer you a comprehensive database relating to SIMATIC products /automation/service&support an:The newsletter keeps you up-to-date with

33、 information relating to your products. Our Service & Support search engine provides you with abundant documentation. A bulletin board where users and experts exchange their knowledge worldwide.Current product information, FAQs and downloads. You local partner for Automation & Drives.Information abo

34、ut on-site services, repairs, spare parts and lots more is found on our Services pages.WinCC flexible 2004 Micro Users Manual, Edition 03/2004, 6AV6691-1AA01-0AB0viHMISIMATICSIMATIC HMISIMATIC ProToolSIMATIC WinCCSIMATIC WinCC flexiblewww.PLCPrefaceA&D Technical Support and AuthorizationAvai

35、lable 24 hours worldwide:Information is available in German and English languageWinCC flexible 2004 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB0viiWorldwide (Nuremberg)Technical Support (Free Contact)Local time:Mo.Fr. 7:00 to 17:00Telephone:+49 (0) 180 5050-222Fax:+49 (0) 180 5050-223E-Mai

36、l: GMT: +1:00Worldwide (Nuremberg)Technical Support(charged, with Automation Value Card only)Local time:0:00 to 24:00, 365 daysTelephone:+49 (911) 895 -7777Fax:+49 (911) 895-7001E-mail: GMT: +1:00Europe/Africa (Nuremberg) AuthorizationLocal time:Mo.Fr. 7:00 to 17:00Telephone:+49

37、(911) 895 -7200Fax:+49 (911) 895-7201E-Mail: GMT: +1:00America (Johnson City)Technical Support and Authorization Local time:Mo.Fr. 8:00 to 19:00Telephone:+1 423 461-2522Fax:+1 423 461-2289E-Mail: GMT: 5:00Asia/Pacific (Beijing)Technical Suppor

38、t and Authorization Local time:Mo.Fr. 8:30 to 17:30Telephone:+86 (10) 64 75 75 75Fax:+86 (10) 64 74 74 74E-mail: GMT: +8:00www.PLCPrefaceWinCC flexible 2004 Micro Users Manual, Edition 03/2004, 6AV6691-1AA01-0AB0viiiwww.PLCTable of contentsPrefaceiii1Introduc

39、tion to WinCC flexible Micro1-11.11.2Components of WinCC flexible1-1Configuration support1-22WinCC flexible Engineering System2-......52.5.6Basic principles on the programming interface2-1Program user interface of WinCC flexible2-1WinCC

40、 flexible user interface elements2-1Menus and toolbars2-3Work area2-5Project window2-6Properties window2-7Output window2-8Working with the mouse2-9Keyboard operation2-10Working with WinCC flexible2-10Displaying help2-10Editor properties2-11Opening an editor2-12Editing several projects with WinCC fle

41、xible2-14Object list2-14Function list2-153Working with tags3-..3.5Basic principles3-1External tags3-1Internal tags3-2Elements and basic settings3-2Tags editor3-2Basic settings for tags and arrays3-4Working with tags3-5Properties of a tag3-5External

42、tags for communication with the PLC3-6Tag limit values3-7Updating the tag value in runtime3-8The basics of arrays3-9The basics of cycles3-104Creating screens4-14.1Basic principles4-1WinCC flexible 2004 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB0ixwww.PLCTable of contents.2

43、.4.4Screen basics4-1Screens editor.4-3Procedures4-5Managing screens4-5Objects of the Screens editor4-6Overview of objects4-6Object groups4-8The advantage of layers4-8Security in Runtime4-95Creating an alarm system5-....25.25.2

44、...5.2.3Basic principles5-1Displaying process and system alarms5-1User-defined alarms5-1Available alarm procedures5-1Acknowledging alarms5-2Alarm classes5-2Displaying alarms5-3Displaying alarms on the HMI device5-3System functions for alarm editing5-4Elements and basic setti

45、ngs5-5Alarm components and properties5-5Editors for Configuring Alarms5-6Basic principles of editors5-6Discrete alarms editor5-6Alarm classes editor5-7Basic settings for the alarm system5-86Configuring a connection6-16.1Connections editor6-17Using global events7-7.3.1Use cases for global t

46、riggers.7-1Working with events7-1Elements of global triggers.7-2Work area of the global triggers7-28Structure of multi-lingual projects8-.28.4Language terminology in WinCC flexible8-1Multilingual configuration8-3Language settings8-4Language settings in the operating system8-4Projec

47、t languages editor8-5Languages during runtime8-69Project documentation9-19.19.2Project documentation9-1Selecting the objects for the project documentation9-110Transfer10-110.1Basic principles of the transfer operation10-1WinCC flexible 2004 Micro Users Manual, Edition 03/2004, 6AV6691-1AA01-0AB0xwww

48、.PLCTable of contents10.210.3.210.3.3Transfer settings10-2Managing files on the HMI device10-3ProSave10-3Data backup for the HMI device.10-4Updating the operating system10-511Configuration examples11-11.411.511.6Create screen.11-1Creating external tags11-4Configuring a

49、n alarm view11-6Configuring an alarm window11-8Configuring discrete alarms11-10Using the system function AlarmViewEditAlarm11-1112Features12-12.2.1IndexGeneral technical data12-1Released operating systems12-1Legal characters12-1System limits12-2System limits12-2WinCC flexible 20

50、04 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB0xiwww.PLCTable of contentsWinCC flexible 2004 Micro Users Manual, Edition 03/2004, 6AV6691-1AA01-0AB0xiiwww.PLC1Introduction to WinCC flexible Micro1.1Components of WinCC flexibleWinCC flexible MicroWinCC flexible Micro is the

51、smallest edition of the WinCC flexible system. You can use WinCC flexible Micro to create and edit projects for plants with the HMI device TP 170micro and the SIMATIC S7-200 controller. The range of functions in WinCC flexible Edition Micro is exactly tailored to these devices.You can upgrade to lar

52、ger editions from the Micro edition. Projects created with the Micro edition can also be edited in the more comprehensive editions of WinCC flexible.Functional Scope of the Individual EditionsWinCC flexible is available in the following editions:Figure 1-1The WinCC flexible EditionsWinCC flexible 20

53、04 MicroUsers Manual, Edition 03/2004, 6AV6691-1AA01-0AB01-1www.PLCIntroduction to WinCC flexible Micro1.2 Configuration supportWinCC flexible Engineering SystemWinCC flexible offers a range of scalable engineering systems which are optimally adapted to the respective tasks involved in confi

54、guring a variety of HMI devices and controllers. Each edition supports a wider range of HMI devices and functions, whereby the Standard edition can be used to configure HMI devices from the Compact edition.1.2Configuration supportCustomized Setup of the Configuration User InterfaceWinCC flexible all

55、ows you to customize the position and behavior of windows and toolbars. This provides the possibility of setting up the working environment according to individual requirements.The configuration of the WinCC flexible workbench is linked to the user logged on in Microsoft Windows. On saving the project, the positions and behavior of windows and toolbars are automatically saved with it.When opened again, the positions and behavior of windows and toolbars