Bibliography Hot Working Of Stainless Steels . , .and . Duplex Stainless

1、HOT WORKING OF STAINLESS STEELS: 1. 300, 2. 400 AND 3. DUPLEX STAINLESSH.J. McQueen, Mechanical Engineering, Concordia UniversityHugh J. McQueen, Prof. Emeritus, Mechanical Industrial Engineering,Concordia University, Montreal, H3G 1M8 Canada mcqueenencs.concordia.caReaders are also referred to the

2、bibliography on C, HSLA and Tool Steels in Spectrum, notably sections: 3.1 Microstructures, Mechanisms, 3.2 Ductility and 3.3 Ferritic steels, mainly Si steel. K INDICATES A KEYNOTE REVIEW PAPER(The research on 300 and 400 stainless steels from Atlas Steels, Tracy QC, started as M.Eng. and Ph.D. pro

3、jects for N.D. Ryan, FCIM. After completion (1983), he continued as a PDF and finally as an associate adjunct professor. During all this time, he was a science-technology teacher in high school with such competence that he earned the Prime Ministers Science Teaching Award. In this entire project all

4、 graphs were plotted by hand and redrawn in ink; each alloy was assigned a symbol that was retained throughout. A sabbatical visitor E. Evangelista who later became a professor at the university in Ancona Italy, contributed significant TEM investigations and organized the project on duplex stainless

5、.) 1.300 STAINLESS1967-198231FLOW STRESS AND MICROSTRUCTURAL CHANGES IN AUSTENITIC STAINLESS STEELDURING HOT DEFORMATION, H.J. McQueen, R.A. Petkovic, H.Weiss and L.G. Hinton, The Hot Deformation of Austenite, Metallurgical Society, AIME, New York (1977), pp.113-139.42DISLOCATION SUBSTRUCTURE IN DYN

6、AMIC RECOVERY AND RECRYSTALLIZATION OF HOT WORKED AUSTENITIC STAINLESS STEEL, L. Fritzmeier, M. Luton, and H.J. McQueen, Strength of Metals and Alloys, (Proc. ICSMA, Aachen), (ed. P. Haasen et al.), Pergamon Press, Frankfurt, 1979, 1, pp. 95-100.43FRACTURE UNDER HOT FORMING CONDITIONS, H.J. McQueen,

7、 J. Sankar and S. Fulop, Mechanical Behavior of Materials, (Proc. ICM 3, Cambridge), Pergamon Press, London, 1979, 2, 675-684.1983-198657DEFORMATION BEHAVIOR OF TYPES 304, 316 AND 317 AUSTENITIC STAINLESS STEELS DURING HOT TORSION, N.D. Ryan,H.J. McQueen and J.J. Jonas,Can. Met. Q.,1983,22,pp. 369-7

8、8.61ROLE OF DYNAMICALLY RECOVERED SUBSTRUCTURE IN DYNAMIC RECRYSTALLIZATION, H.J. McQueen, Deformation, Processing and Structure, (G. Krausz, ed.), ASM, Metals Park, Ohio, 1983, pp. 231-38.67THE HOT WORKABILITY OF AS-CAST AND WROUGHT AUSTENITIC STAINLESSSTEELS, H.J. McQueen and N.D. Ryan, Stainless

9、Steels 84, (Goteborg, Sweden), Institute of Metals, London, 1985, pp. 50-61.68COMPARATIVE HOT WORKING CHARACTERISTICS OF 304, 316 AND 317 STEELS, BOTH CAST AND WORKED, N.D. Ryan and H.J. McQueen, Int. Conf. on New Developments in Stainless Steel Technology, (Detroit), ASM, Metals Park, Ohio, 1985, p

10、p. 293-304.72EFFECTS OF ALLOYING UPON THE HOT WORKABILITY ; MEAN PASS FLOW STRESSES AND INTERPASS SOFTENING IN MULTISTAGE PROCESSING OF C, HSLA TOOL AND -SS, N.D. Ryan and H.J. McQueen, J. Mech. Working Tech., 1986, 12, pp. 279-296.73MEAN PASS FLOW STRESSES AND INTERPASS SOFTENING IN MULTISTAGE PROC

11、ESSING OF C, HSLA AND -STAINLESS STEELS, N.D. Ryan and H.J. McQueen, J. Mech. Working Tech., 1986, 12, pp. 323-349.74HOT DEFORMATION CHARACTERISTICS OF WORKED 301 AUSTENITIC STAINLESS STEEL, N.D. Ryan and H.J. McQueen, Strength of Metals and Alloys, ICSMA 7, (H.J. McQueen et al., ed.), Pergamon Pres

12、s, Oxford, 1986, pp. 935-940.85HOT DEFORMATION CHARACTERISTICS OF WORKED TYPES 301 AND 304 AUSTENITIC STAINLESS STEELS, N.D. Ryan and H.J. McQueen, Intnl. Symp, on Plasticity and Resistance to Metal Deformation, (S. Blecic, ed.), Ferrous Metallurgical Institute, Niksic, Yugoslavia, 1986, pp. 11-26.8

13、6DYNAMIC RECRYSTALLIZATION IN AUSTENITIC STAINLESS STEEL, N.D. Ryan, H.J. McQueen and E. Evangelista, Processes - Recovery, Recrystallization and Grain Growth, (N. Hansen et al. eds.) Riso Natl. Lab., Roskilde Denmark, 1986, pp. 527-534.87DYNAMIC RECOVERY AND STRAIN HARDENING IN HOT DEFORMATION OF 3

14、17 STAINLESS STEEL, N.D. Ryan and H.J. McQueen, (Intnl. Conf. on Low Energy Dislocation Structures), Mat. Sci. Eng. , 1986, 81, pp. 259-272.1987-199091HOT ROLLING, DEFORMATION AND RECRYSTALLIZATION TEXTURES IN FCC METALS, H.J. McQueen and H. Mecking, Z. Metallkde, (1987), 78, pp. 387-396.96CALCULATI

15、ON OF POWER REQUIREMENTS FOR HOT ROLLING STAINLESS STEELS IN A PLANETARY MILL THROUGH TORSION SIMULATION, N.D. Ryan and H.J. McQueen, Proc. 4th Intnl. Steel Rolling Conf. (France), 1987, pp. F.17.1-F.17.9.101DYNAMIC RECOVERY, STRAIN HARDENING AND FLOW STRESS IN HOT WORK OF 316 STEEL, N.D. Ryan and H

16、.J. McQueen, Czech. J. Phys, 1989, B39, pp. 458-465.103HOT STRENGTH AND DRV AND DRX OF 317 STAINLESS STEEL, E. Evangelista, N.D. Ryan and H.J. McQueen, Metal Sci. Tech., 1987, 5, (2), pp. 50-58.109RESEARCH FOR QUALITY IN HOT WORKING OF AUSTENITIC STAINLESS STEELS, N.D. K Ryan, E.Evangelista and H.J.

17、 McQueen, Innovation for Quility, (Bologna Conf.), Assoc. Ital. Metal, Milano, 1988, pp. 215-234. Metallurgia Italiana, (1989) 81, 119-131.111HOT WORKABILITY OF 316 AND OTHER 300 SERIES STEELS, H.J. McQueen and N.D. Ryan, Strength of Metals and Alloys, ICSMA 8, (Finland), Pergamon Press, Oxford, 198

18、8, Vol. 2, pp. 1323-1330.117FLOW STRESS, STRAIN HARDENING DYNAMIC RESTORATION AND DUCTILITY IN HOT WORKING OF 316 STEEL,N.D.Ryan and H.J.McQueen,J. Mat. Proc. Tech.,1990,21,pp.177-199.118WORK HARDENING, STRENGTH, AND DUCTILITY IN THE HOT WORKING OF 304 STAINLESS STEEL, N.D. Ryan and H.J. McQueen, Hi

19、gh Temp. Tech., 1990, 8, pp. 27-44.119DYNAMIC SOFTENING MECHANISMS IN 304 AUSTENITIC STAINLESS STEEL, N.D. Ryan and H.J. McQueen, Can. Met. Q., 1990, 29, pp. 147-162.120HOT STRENGTH AND SOFTENING CHARACTERISTICS OF 301 STEEL BY TORSIONAL SIMULATION OF INDUSTRIAL CONDITIONS, N.D. Ryan and H.J. McQuee

20、n, Int. Symp. On Physical Simulation of Welding Hot Forming and Continuous Casting, J.T. Bowker and C.S. Champion, eds., Canadian Gov. Pub. Centre, Ottawa, 1989, Mtl. 92-43 (TR), pp. V59-68, 1992.121MICROSTRUCTURES, FISSURES AND DUCTILITY IN HOT WORKING OF AUSTENITIC STAINLESS STEEL, H.J. McQueen, J

21、. Bowles and N.D.Ryan, Microstruct Sc.,1989,17,357-373.122CONSTITUTIVE EQUATIONS FOR STRENGTH AND FAILURE AT ELEVATED TEMPERATURES AND STRAIN RATES IN AUSTENITIC STAINLESS STEELS, N.D. Ryan and H.J. McQueen, Constitutive Laws of Plastic Deformationand Fracture, A.S. Krausz et. al., eds., Kluwer Acad

22、emic Pub. Dardrecht, 1990, pp. 333-340.129LA FORMABILITE A CHAUD DES ACIERS INOXYDABLES, N.D. Ryan, and H.J. McQueen, Mise en Forme des Matriaux, (57e Congrs de lAfcas), M. Galopin, J. Masounave, Ecole Tech. Sup., Montreal, pp. 103-114, 1990.130CONSTITUTIVE EQUATIONS FOR DECLINING TEMPERATURE MULTIS

23、TAGE DEFORMATION OF 300 SERIES STEELS, H.J. McQueen, N.D. Ryan and E. Fry Mathematical Modelling of Hot Rolling of Steel, S. Yue, ed., Can. Inst. Metal., Montreal, pp. 269-280, 1990.1990-92137COMPARISON OF DYNAMIC SOFTENING IN 301, 304, 316 AND 317 STAINLESS STEELS, N.D. Ryan and H.J. McQueen, High

24、Temperature Technology, 8, 1990, pp. 185-200.139COMPARISON OF STATIC SOFTENING IN 304 AND 301 STAINLESS STEELS CONSTANT AND DECLINING TEMPERATURE TESTS, N.D. Ryan, and H.J. McQueen, Materials Forum (Australia), 14, 1990, pp. 283-295.140BAR MILL TORSIONAL SIMULATION OF 304 STAINLESS STEEL, N.D. Ryan

25、and H.J. McQueen, Can. Met. Quart., 30, 1991, pp. 113-124.149THE UTILITY OF TORSION IN HOT WORKABILITY TESTING OF METALLIC MATERIALS, E. Evangelista, N.D. Ryan and H.J. McQueen, Metal. Sci. Tech., 9, 1991, pp. 75-92.150COMPARISON OF STATIC SOFTENING IN STAINLESS STEELS UNDER ISO- AND ANISO-THERMAL C

26、ONDITIONS, N.D. Ryan and H.J. McQueen, Mat. Sci. Tech., 7, 1991, pp. 815-828.151MICROSTRUCTURAL DEVELOPMENT DURING BAR MILL SIMULATION OF Mo ALLOYED g STAINLESS STEELS, E. Evangelista, H.J. McQueen, N.D. Ryan and J. Bowles, Stainless Steels, 1991 (Chiba), Iron Steel Inst. Japan, Tokyo, 1991, pp. 842

27、-849.153EFFECTS OF SOLUTE ON CONSTITUTIVE CONSTANTS FOR AUSTENITIC STAINLESS STEELS, H.J. McQueen and N.D. Ryan, Strength of Metals & Alloys, ICSMA 9 (Israel), D.G. Brandon et al, eds., Freund Pub. House, London, 1991, pp. 359-366.154KOCKS-MECKING ANALYSIS OF THE DYNAMIC RECOVERY BEHAVIOR OF 301 STA

28、INLESS STEEL, N.D. Ryan and H.J. McQueen, Strength of Metals & Alloys, ICSMA 9 (Israel), D.G. Brandon et al, eds., Freund Pub. House, London, 1991, pp. 675-682.157NEW METHOD FOR SINH CONSTITUTIVE CONSTANTS FOR HIGH T DEFORM. OF 300 STAINLESS S., A. Cingara, H.J. McQueen, J. Mat. Processing Tech., (1

29、992), 36, pp. 17-30.158NEW FORMULA FOR CALCULATING FLOW CURVES FROM HIGH T CONSTITUTIVE DATA FOR 300 SS, A. Cingara, H.J. McQueen, J. Mat. Processing Tech., (1992), 36, pp. 31-42.159NEW PROCEDURES FOR CONSTITUTIVE ANALYSIS (SINH-ARRHENIUS) AND FOR FLOW CURVE CALCULATION APPLIED TO 316 STAINLESS STEE

30、L, H.J. McQueen, A. Cingara and N.D. Ryan, Mat. at High Temp., (1992), 10, pp. 201-206.160HOT STRENGTH AND MICROSTRUCTURES OF 316 SS DURING MULTISTAGE TORSION SIMULATION, N.D. Ryan and H.J. McQueen, J.Mat.Proc. Tech., (1993), 36, pp. 103-123.1992-93168CALCULATION OF HIGH TEMP. FLOW CURVES FOR 300 SE

31、RIES STAINLESS STEELS BASED ON p AND p, H.J. McQueen, A. Cingara and N.D. Ryan, Application of Stainless Steels 92, H.Nordberg, J.Bjorklund,(eds.),Jernkontoret, Stockholm, (1992), pp. 904-913.169SHAPE VARIATIONS IN PASS FLOW CURVES OF ROLLING SCHEDULES FOR 301, 304, 316 AND 317 STEELS, H.J. McQueen,

32、 N.D. Ryan and E. Evangelista, Application of Stainless Steels 92, H.Nordberg, J.Bjorklund,(eds.),Jernkontoret, Stockholm, (1992), pp. 914-923.175STATIC RECRYSTALLIZATION ASSOCIATED WITH HOT WORKING OF AUSTENITIC STAINLESS STEELS, N.D. Ryan, E. Evangelista and H.J. McQueen, Recrystallization 92, M.

33、Fuentes and J. Gil Sevillano, eds., TransTech Pub., Switzerland (Mat.Sci.Forum, 113-115, 1993), (1992), pp. 515-520.176DYNAMIC RECRYSTALLIZATION IN AUSTENITIC STAINLESS STEELS, H.J. McQueen, N.D. Ryan and E. Evangelista, Recrystallization 92, M. Fuentes and J. Gil Sevillano, eds., TransTech Pub., Sw

34、itzerland (Mat.Sci.Forum, 113-115, 1993), (1992), pp. 435-440.179COMPARISON OF CONSTITUTIVE EQUATIONS FOR ISOTHERMAL CONDITIONS AND ANISOTHERMAL MULTISTAGE DEFORMATIONS IN AUSTENITIC STAINLESS STEELS, H.J. McQueen, N.D. Ryan and E. Evangelista, Modelling of Plastic Deformation and its Engineering Ap

35、plications, S.I. Andersen, et al., eds., Roskilde, DK, (1992), pp. 355-360.187HOT DEFORMATION BY TORSION OF TYPE 303 AUSTENITIC STAINLESS STEEL, T. Athanasoulias, N.D. Ryan, and M.H. McQueen, 34th Mechanical Working and Steel Processing Conf.Proc., Iron Steel Soc., Warrendale, PA., (1993), 30, pp. 5

36、01-505.1993-94198METALLOGRAPHIC ANALYSIS OF THE MICROSTRUCTURAL EVOLUTION OF 300 SERIES STEELS DURING ISOTHERMAL CONTINUOUS AND ANISOTHERMAL MULTISTAGE DE-FORMATION, N.D. Ryan and H.J. McQueen, Aspects of High Temperature Deformation and Frac-ture in Crystalline Solids, (JIMS 7), Y.Hosoi, ed., Japan

37、 Inst. Metals, Sendai, (1993), pp. 59-65.199STATIC AND DYNAMIC RECRYSTALLIZATION IN MULTISTAGE PROCESSING OF AUSTENITIC STAINLESS STEELS, H.J. McQueen and N.D. Ryan, Strip Casting, Hot and Cold Working of Stainless Steels, (Met. Soc. CIMM Conf., Quebec City), N.D. Ryan, A. Brown and H.J. McQueen, ed

38、s., CIMM, Montreal, (1993), pp. 91-106.200SUBSTRUCTURES AND DYNAMIC NUCLEATION UP TO STEADY STATE STRAINS IN 309 AND 303 STAINLESS S., H.J.McQueen, Y.Cui, B.Li,Q.Meng, N.D.Ryan, , Strip Casting, Hot and Cold Working of Stainless Steels, (Met. Soc. CIMM Conf., Quebec City), N.D. Ryan, A. Brown and H.

39、J. McQueen, eds., CIMM, Montreal, (1993), 181-192.201MICROSTRUCTURES AND FLOW STRESSES OF HOT WORKED 309 STEEL, X. Xia, H.J. McQueen, N.D. Ryan, B. Li, Q. Meng and Y. Cui, , Strip Casting, Hot and Cold Working of Stainless Steels, (Met. Soc. CIMM Conf., Quebec City), N.D. Ryan, A. Brown and H.J. McQ

40、ueen, eds., CIMM, Montreal, (1993), pp. 117-129.206HOT AND COLD WORKING OF AUSTENITIC STAINLESS STEELS, H.J. McQueen, E. K*Evangelista and N.D. Ryan, Processes & Materials Innovation, Stainless Steel 1993, (Florence), W. Nicodemi, ed., Assoc. Ital. Metal., Milan, (1993), 2, pp. 289-302.207EFFECTS OF

41、 HOT DEFORMATION ON -FERRITE IN AUSTENITIC STAINLESS STEELS, E.V. Konopleva and H.J. McQueen, Processes & Materials Innovation, Stainless Steel 1993, (Florence), W. Nicodemi, ed., Assoc. Ital. Metal., Milan, (1993), 3, pp. 291-296.211COMPARITIVE KOCKS MECKING ANALYSIS OF THE DYNAMIC RECOVERY OF 304

42、AND 309 STAINLESS STEELS, N.D. Ryan and H.J. McQueen, Advances in Hot Deformation Textures and Microstructures, J.J.Jonas, T.R. Bieler and K.J. Bowman, eds., TMS-AIME, Warrendale, PA., (1994), pp. 445-457.1995-1996226FORMATION AND UTILIZATION OF SERRATIONS IN GRAIN BOUNDARIES, H.J. McQueen, N.D. Rya

43、n, E.V. Konopleva and X. Xia, (Engineering Aspects Of Grain Boundary and Interface Science), Can. Metal. Quart. (1995) 34, pp. 219-229.230RELATIONSHIP OF ENERGY DISSIPATION EFFICIENCY TO MICROSTRUCTURAL EVOLUTION IN HOT WORKING OF AISI 304 STEEL, H.J. McQueen, N. Jin, and N.D. Ryan, Mat. Sci. Eng, (

44、1995), A190, pp. 43-53.239HOT WORKING CHARACTERISTICS OF STEELS IN AUSTENITIC STATE, H.J. McQueen, S. Yue, N.D. Ryan and E. Fry, J. Mat. Proc. Tech. 1995, 53, pp.293-310.241MICROSTRUCTURAL ANALYSIS OF THE EFFECTS OF SULFUR ON THE HOT STRENGTH AND DUCTILITY OF TYPE 416 MARTENSITIC STAINLESS STEEL UND

45、ER CONTINUOUS AND MULTISTAGE DEFORMATION CONDITIONS, T. Tran, N.D. Ryan, H.J. McQueen and M.E. Smagorinsky, Phase Transformation During Thermal/Mechanical Processing of Steel, E.B. Hawbolt and S.Yue, eds., Met. Soc. CIM, 1995, pp. 317-330.242SUPERPLASTIC BEHAVIOUR OF SUBMICROCRYSTALLINE AUSTENITIC A

46、ND DUPLEX STAINLESS STEELS OBTAINED BY TRANSFORMATION, R. Zaripova, K. Farkhutdinov, A. Zakirova, H.J. McQueen, Phase Transformation During Thermal/Mechanical Processing of Steel, E.B. Hawbolt and S.Yue, eds., Met. Soc. CIM, 1995, pp. 529-536.251COMPARISON OF HOT WORKING BEHAVIOR OF AUSTENITIC AND F

47、ERRITIC STAINLESS STEELS, H.J. McQueen, N.D. Ryan, R. Zaripova and K. Farkhutdinov, Proc. 37 Mech. Working and Steel Processing Conf. (Hamilton, Oct. 1995), Iron and Steel Soc., AIME, Warrendale PA, 1996, pp. 883-894.1996-1998263COMPARISON OF PRODUCTION AND PROPERTIES OF SUBMICROCRYSTALLINE AND NORM

48、AL STAINLESS STEELS, G.A. Salishchev, H.J. McQueen, R.G. Zaripova, and K.G. Farkhutdinov, Stainless Steels 96 Proc., German Iron and Steel Inst., 1996, Dsseldorf,pp.345-346.267SUBMICROCRYSTALLINE MATERIALS STRUCTURE FORMATION AND PROPERTIES,KG.A. Salishchev, R.G. Zaripova, A.A. Zakirova and H.J. McQ

49、ueen, Hot Workability of Steels and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan (eds.), Met. Soc. CIM, Montreal, 1996, pp. 217-226.282EFFECT OF STRESS MULTIPLIER ON SINH CONSTITUTIVE EQUATION FOR 301 TYPE STEEL. H.J. McQueen, N.D. Ryan and P. Sakaris, Hot Workability of Steel

50、s and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan (eds.), Met. Soc. CIM, Montreal, 1996, pp. 425-430.283REDISTRIBUTION OF SEGREGATED FERRITE (AUSTENITE) IN AS-CAST AUSTENITIC (FERRITIC) STAINLESS STEELS DURING MULTISTAGE HOT WORKING, E.V. Konopleva, H.J. McQueen and N.D. Ryan

51、, Hot Workability of Steels and Light Alloys-Composites, H.J. McQueen, E.V. Konopleva and N.D. Ryan (eds.), Met. Soc. CIM, Montreal, 1996, pp. 431-442.1999-2000319EFFECT OF STRESS MULTIPLIER ON SINH CONSTITUTIVE EQUATION FOR 317-TYPE STEEL, H.J. McQueen, N.D. Ryan and P. Sakaris, Stainless Steel 99

52、Science and Market (Sardinia), G. DiCaprio et al. eds., Assoc. Ital. Metal., Milan, 1999, pp. 265-272.330EFFECTS OF WORK HARDENING AND DYNAMIC RESTORATION UPON THE HOT STRENGTH AND DUCTILITY OF 309 AUSTENITIC STAINLESS STEEL, N.D. Ryan and H.J. McQueen, Metal Welding, Applications and Thermomechanic

53、al Processing, J.P. Boillot, M. Evrard, A. Galbois, M.V. Krishnadev, eds., Met. Soc. CIM, Montreal, (1999), pp. 413-426.331VARIATION OF SINH CONSTITUTIVE CONSTANTS WITH STRESS MULTIPLIER FOR 316 AUSTENITIC STAINLESS STEEL, H.J. McQueen, N.D. Ryan, P.Sakaris, Metal Welding, Applications and Thermomec

54、hanical Processing, J.P. Boillot, M. Evrard, A. Galbois, M.V. Krishnadev, eds., Met. Soc. CIM, Montreal, (1999), pp. 427-430.2000-2002345COMPARISON OF DYNAMIC RESTORATION MECHANISMS IN ALLOYS OF ALUMINUM AND OF IRON, H.J. McQueen, Thermomechanical Processing of Steel (Jonas Symposium), S. Yue, E. Es

55、sadiqi eds., Met. Soc. CIM, Montreal (2000) pp. 323-333.367CONSTITUTIVE ANALYSIS IN HOT WORKING, H.J. McQueen & N.D. Ryan, (Rate ProcessesKIn Plastic Deformation II, S.V. Raj ed., TMS-AIME, 2000), Mat. Sci. Eng., A322, (2002), 43-63.382DESIGN OF ELEVATED TEMPERATURE MECHANICAL SHAPING OF AUSTENITIC

56、AND SUPER-AUSTENITIC STAINLESS STEELS, N.D. Ryan and H.J. McQueen, Multidisciplinary Design in Engineering, R.B. Bhat, et al., eds, CSME-MDE, (2001), (electronic publication).2003-2004408STUDIES ON HOT WORKING AND MICROSTRUCTURE EVOLUTION OF ALUMINUM ALLOYS IN RUSSIA, D.S. Salonine and H.J. McQueen,

57、 Light Metals/Metaux Legers 2004, D. Gallienne and R. Ghomaschi, eds., Met. Soc., CIM, Montreal, (2004), pp. 57-69.411GRAIN REFINEMENT IN AUSTENITIC AND FERRITIC STAINLESS STEELS, H.J. McQueen. N. D. Ryan and R.G. Zaripova, Ultra-Fine Structured Steels, E. Essadiqi and J. Thomson, eds., Met. Soc. CI

58、M, Montreal, (2004), pp. 55-67.2005-2007 416EFFECTS OF COMPOSITION UPON THE CONTINUOUS AND MULTISTAGE KDEFORMATION OF AUSTENITIC, FERRITIC, MARTENSITIC AND DUPLEX STAINLESS STEELS, N.D. Ryan, J. Bowles and H.J. McQueen, Metal 2005 M. Kursu and J. Kliber, eds., Cech Metal. Soc., (http:/metal2005.tanger.cz), 12 pages.421HISTORICAL ASPECTS OF THERMOMECHANICAL PROCESSING FOR STEELS, H.J. K,HMcQueen, (invited, Thermec 2006, Vancouver), Mat. Res. Forum, 539-543, (2006), 4397-4404.2. 400 STAINLESS1987-199293THERM