版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、Highly Efficient Palladium-Catalyzed Suzuki-Miyaura Cross-Coupling with Three-Dimensional Geometry -Diimine Ligands under Mild Aerobic ConditionsPing Huo1, Wanyun Liu* Corresponding author. Tel.: +86 795 3201985; fax: +86 795 3201987. E-mail address: liuwanyun2006 (W. Liu); yc_mgq (G. Mei).1, Guangq
2、uan Mei*11Key Laboratory of Jiangxi University for Applied Chemistry and Chemical Biology, Yichun University, Yichun 336000, ChinaThe three-dimensional geometry 9, 10-dihydro-9, 10-ethanoanthracene-11,12-diimine /Pd(OAc)2 system has been developed for the catalytic cross-coupling of aryl halides wit
3、h arylboronic acids. A combination of these -diimines and Pd(OAc)2 was found to form a highly efficient catalyst for the Suzuki-Miyaura cross-coupling of various aryl bromides and activated aryl chlorides with arylboronic acids at room temperature in ethanol/aqueous media under ambient atmosphere, a
4、nd excellent yields of products.The Suzuki-Miyaura cross-coupling reaction, involving the coupling of an arylboronic acid with an organohalide, has proven to be an extremely useful synthetic tool for the construction of biaryls1-8, which are present in a wide range of natural products, pharmaceutica
5、ls, agrochemicals, functional polymer materials and liquid crystals9-12. It is well-known that the Suzuki-Miyaura cross-coupling reaction can be efficiently carried out using phosphine ligands/palladium complex. Because of the superior donor capability and stabilization effects, the bulky and electr
6、on-rich phosphine ligands are outstanding in the palladium catalyzed Suzuki cross-coupling reaction13-18. However, serious drawbacks still exist in most phosphines, such as highly toxic and air- and moisture-sensitive19,20. These drawbacks severely hinder its usage. Therefore, in the past few years,
7、 great advances have been made in developing active and efficient catalysts by modifying traditional ligands and discovering phosphine-free ligands21-30.Recently, phosphine-free ligands with, such as heterocyclic carbenes31-36, -ketoamine37-40, 2-aryl-2-oxazolines41 and other amines42-43, have also
8、emerged for use in the Suzuki-Miyaura cross-coupling reaction. Among them, -diimine ligands, previously used as excellent candidates for olefin and -alkene polymerization, have been applied to Suzuki cross-coupling. The Pd(OAc)2/N,Ndicyclohexyl-1,4- dizabutadiene system have been successfully develo
9、ped by Nolan and his collaborators, which show high catalytic activity for cross-coupling of aryl halides with arylboronic acids44. Subsequently, the utilization of -diimine ligand/Pd for cross-coupling reaction has attached much interest in both academic and industrial fields45. Considering that bo
10、th the backbone and the aryl ring have profound effects on the catalytic properties of the palladium complexes, herein we present a series of -diimine ligand, the 9, 10-dihydro-9, 10-ethanoanthracene-11,12-diimine with bulky three-dimensional geometry backbones and substituted aniline moieties gener
11、ated in situ. The coordination versatility of these ligands, a consequence of the flexibility of the NCCN backbone and the strong -donor and -acceptor properties, reflects a very important feature of -diimine ligand-metal complexes46,47, which might assist in stabilizing catalytic species. Furthermo
12、re, conditions are described that easily provide the desired products in high yields under aerobic conditions, with great tolerance for a broad range of functional groups on the aryl bromides.As shown in Scheme 1, the target -diimine ligands with various steric and electrionic substituents such as m
13、ethyl, isopropyl, bromine, chlorine were prepared according to the previously reported method48. At first, the 10 mmol of 9,10-dihydro-9,10-ethanoanthracene-11,12-dione reacted with 30 mmol of aniline by a catalytic amount of p-toluenesulfonic acid in refluxing toluene. After 24 hours, the reaction
14、mixture was cooled to room temperature and evaporated at reduced pressure. The residual solids were further purified by silica column chromatography (v/v, 20/1, petroleum ether/ethyl acetate) to get ligands (L1-L5) as yellow crystal in high yield. Scheme 1. 9, 10-Dihydro-9, 10-ethanoanthracene-11,12
15、-diimine ligandsThe catalytic activity of L1L5 in Suzuki cross-coupling reactions was then evaluated. In an effort to understand how the ligands would promote this coupling reaction most efficiently, a reaction in which K2CO3 was used as a base and ethanol/water was a cosolvent in the reaction of ph
16、enylboronic acid with 4-bromoacetophenones at room temperature under air conditions, was examined. As shown in Table 1, the data revealed that the three-dimensional geometry -diimine ligands were effective ligands for palladium-catalyzed Suzuki cross-coupling. For a comparison, in the absence of lig
17、ands, only 30 % yield of product was produced in the presence of 0.025 mol% of Pd(OAc)2 (entry 1, Table 1). However, when adding the ligands, the yield of product increased dramatically, to a range of 8099% (entries 26, Table 1), indicating that the catalysts were formed in situ. The activities of t
18、hese three-dimensional geometry -diimines were far higher than the activities of conventional planar -diimines. The reason was that the bulky three-dimensional geometry -diimines could increase the elecron-donating properties of the backbone, which positively affected catalytic ability.Among the -di
19、imines investigated, L3 with 2,4,6-trimethyl groups on the aniline moiety (entry 4, Table 1) afforded the highest activity. In this case, the conversion of the product reached 99%. Comparatively, L5 with an electron-withdrawing chloro group on the para position of the aniline (entry 6, Table 1) , wa
20、s less active under the same conditions (80% yield). These results could be ascribed to the increase in electron-donating ability of the aniline moieties of the ligand, leading to an increase in the rate of oxidative addition and the stabilization of the palladium species. Table 1. Influence of -dii
21、mine ligands on the palladium-catalyzed cross-coupling reaction of 4-bromoacetophenones with phenylboronic acidaEntryLigandYield(%)b1No L302L1913L2934L3995L4886L580a Reaction conditions: 1.0 mmol of 4-bromoacetophenones, 1.2 mmol of phenylboronic acid, 2.0 mmol of K2CO3, 0.025 mol % Pd(OAc)2, 0.025
22、mol % ligand, 5 ml EtOH/H2O (v/v, 1:1), room temperature, 2 h. b Isolated yields. As shown in Table 2, the effect of solvents on the coupling reaction was also examined. The polarity of the solvent had a profound effect on yield. For instance, the nonpolar solvent toluene gave a poor yield (45%), wh
23、ereas the polar solvents, such as N, N-dimethylformamide (DMF), tetrahydrofuran (THF) and ethanol, provided the product in moderate yield (entries 13, Table 2). Meanwhile, reaction activities were dramatically improved using organic/water cosolvents. EtOH/H2O (v/v, 1:1) system afforded the highest y
24、ield (entry 7, Table 2) among the tested aqueousorganic solvents. In addition, an investigation of the influence of the base suggested that the common and inexpensive inorganic bases, such as Cs2CO3 and K2CO3 are more effective, while other bases such as Na2CO3, KOH, Ca(OH)2, NaOEt, K3PO4, KF, gave
25、slightly lower yields. Therefore, K2CO3 as base and EtOH/H2O (v/v, 1:1) as solvent were chosen for further study because they were readily available, inexpensive and had a higher efficiency.Table 2. Optimization of reaction conditions at room temperatureaEntrySolventBaseYield(%) b1EtOHK2CO3842DMFK2C
26、O3803THFK2CO3684TolueneK2CO3455DMF/H2O(v/v, 1:1)K2CO3916THF/H2O(v/v, 1:1)K2CO3807EtOH/H2O(v/v, 1:1)K2CO3998EtOH/H2O(v/v, 2:1)K2CO3949EtOH/H2O(v/v, 1:2)K2CO39310EtOH/H2O(v/v, 1:1)Na2CO39211EtOH/H2O(v/v, 1:1)Cs2CO39912EtOH/H2O(v/v, 1:1)KOH8613EtOH/H2O(v/v, 1:1)Ca(OH)25414EtOH/H2O(v/v, 1:1)NaOEt9115EtO
27、H/H2O(v/v, 1:1)K3PO48716EtOH/H2O(v/v, 1:1)KF65a Reaction conditions: 1.0 mmol of 4-bromoacetophenones, 1.2 mmol of phenylboronic acid, 2.0 mmol of base, 0.025 mol % Pd(OAc)2, 0.025 mol % ligand L3, 5ml solvent, 2h.b Isolated yields. As illustrated in Table 3, high catalytic activity was observed in
28、the coupling of activated bromides with phenylboronic acid at room temperature with the ligand L3. These catalytic system on cross-coupling reaction displayed remarkable tolerance toward the electronic properties of the substrates. Both the aryl bormides (entries 18, Table 3) and aryl boronic (entri
29、es 912, Table 3) with diffenent elecronic effect substituents, there were no significant differnence in yield or reaction time. Due to retarding both the oxidative addition and transmetalation processes, the aryl halides with ortho-methyl substituent had less active. But in this study, they could ac
30、hieve high yield with prolonged reaction time (entries 6, 8, 12, Table 3). Significantly, the relatively unactivated aryl chlorides could react with phenylboronic acid when this catalytic system was employed, which led to moderate to high yields (entries 13 and 14, Table 3).Table 3. Suzuki cross-cou
31、pling reaction of aryl halides with phenylboronic acid under aerobic conditionsaEntryAryl halideAryl boronicProductsTime(h)Yield(%)b12972296329942985299649074958681929810297112991248613c127514c1235a Reaction conditions: 1.0 mmol of aryl bromide, 1.2 mmol of aryl boronic acid, 2.0 mmol of K2CO3, 0.02
32、5 mol % Pd(OAc)2, 0.025 mol % ligand, 5 ml EtOH/H2O (v/v, 1:1), room temperature.b Isolated yields. c Reaction conditions: 1.0 mmol of aryl chloride, 1.2 mmol of aryl boronic acid, 2.0 mmol of K2CO3, 0.25 mol % Pd(OAc)2, 0.25 mol % ligand, 5 ml EtOH/H2O (v/v, 1:1), reaction temperature: 80 °C.I
33、n summary, an unprecedented, general, and efficient methodology based on the Pd(OAc)2/three-dimensional geometry -diimines system has been developed. The Pd(OAc)2/three-dimensional geometry -diimine systems is very efficient in the Suzuki-Miyaura cross-coupling reaction of aryl bromides with aryl bo
34、ronic acids at room temperature in ethanol/aqueous media under ambient atmosphere, and excellent yields of products. This system represents unprecedented reactivity for a -diimine ligand system with regard to reactivity with unactivated and sterically encumbered substrates, as well as activated aryl
35、 chlorides. Future studies focused on the activation of electron-rich and electron-neutral aryl chlorides by Pd(OAc)2/three-dimensional geometry -diimine systems are ongoing.ExperimentalStarting materials and solvents were purchased from common commercial sources and were used without additional pur
36、ification. 1H NMR and 13C NMR spectra were recorded at 400 MHz using TMS as internal standard. A 50 mL flask was charged with ligand (0.00025 mmol), Pd(OAc)2 (0.00025 mmol), base (2.0 mmol), and arylboronic acid (1.2 mmol), EtOH/H2O (v/v, 1:1, 5 mL) and aryl bromide (1.0 mmol) were added. The reacti
37、on was stirred at room temperature for the certain time. The progress of the reaction was monitored by TLC. After completion of the reaction it was extracted with ether (3 x 10 mL) and washed with water. The combined ether extract was dried over anhydrous Na2SO4. The filtrate was concentrated under
38、reduced pressure. The crude material was purified by column chromatography over silica gel using hexane/ethyl acetate (v/v, 9:1) to get the desired coupling product. The products were characterized by 1H NMR.4-Methyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 7.56 (d, J=7.4 Hz, 2H), 7.47 (d, J=7.4 Hz,
39、2H), 7.40 (t, J=7.4 Hz, 2H), 7.30 (t, J=7.2 Hz, 1H), 7.23 (d, J=7.4 Hz, 2H), 2.37 (s, 3H).4-Methoxy-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 7.54 (t, J=8.8 Hz, 4H), 7.41 (t, J=7.6 Hz, 2H), 7.30 (t, J=7.6 Hz, 1H), 6.97 (d, J=8.8 Hz, 2H), 3.84 (s, 3H).4-Acetyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 8.
40、04 (d, J=8.4 Hz, 2H), 7.69 (d, J=8.4 Hz, 2H), 7.63 (d, J=7.2 Hz, 2H), 7.48 (t, J=7.2 Hz, 2H), 7.41 (t, J=7.2 Hz, 1H), 2.64 (s, 3H).4-Phenyl-benzaldehyde. 1H NMR (400 MHz, CDCl3, ppm): 10.05 (s, -CHO, 1H), 7.95 (d, J=8.4 Hz, 2H), 7.75 (d, J=8.0 Hz, 2H), 7.63 (d, J=7.6 Hz, 2H), 7.48 (t, J=7.4 Hz, 2H),
41、 7.41 (t, J=7.4 Hz, 1H).4-Chloro-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 7.48 (t, J=8.8 Hz, 4H), 7.42 (t, J=7.6 Hz, 2H), 7.33 (t, J=7.6 Hz, 1H), 7.22 (d, J=8.8 Hz, 2H).2-Methyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 7.34-7.13 (m, Ar-H, 9H), 2.19 (s, CH3, 3H).1-Phenyl-naphthalene. 1H NMR (400 MHz, C
42、DCl3, ppm): 7.92-7.81 (m, Ar-H,3H), 7.57-7.40 (m, Ar-H, 9H) .2,4,6-Trimethyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 7.52-6.81 (m, Ar-H, 7H), 2.25 (s,CH3, 3H), 1.93 (s, CH3, 6H).4-Acetyl-4'-methyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 8.02 (dd, J=2.0, 8.4 Hz, 2H), 7.66 (dd, J=2.0, 8.4 Hz, 2H )
43、, 7.53 (dd, J=2.0,8.0 Hz, 2H), 7.28 (d, J=6.4 Hz, 2H), 2.63 (s, 3H), 2.41 (s, 3H).4-Acetyl-4'-methoxy-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 8.00 (d, J=8.4 Hz, 2H), 7.63 (d, J=8.4 Hz, 2H), 7.57 (d, J=8.8 Hz, 2H), 6.99 (d, J=8.8 Hz, 2H), 3.85 (s, 3H), 2.62 (s, 3H).4-Acetyl-4'-fluoro-biphenyl
44、. 1H NMR (400 MHz, CDCl3, ppm): 8.03 (d, J=8.4 Hz, 2H), 7.65-7.57 (m, 4H), 7.16 (t, J=8.8 Hz, 2H), 2.64 (s, 3H).4-Acetyl-2'-methyl-biphenyl. 1H NMR (400 MHz, CDCl3, ppm): 8.01 (d, J=8.4 Hz, 2H), 7.43 (d, J=8.4 Hz, 2H), 7.31-7.21 (m, 4H), 2.65 (s, 3H), 2.27 (s, 3H). AcknowledgmentThis work was su
45、pported by the National Natural Science Foundation of China (21261024) and the Natural Science Foundation of Jiangxi Province (20151BAB206021 and 20132BAB203002).Notes and references1 N. Miyaura, T. Yanagi and A. Suzuki, Synth. Commun., 1981, 11, 513-519.2 N. Miyaura and A. Suzuki, Chem. Rev., 1995,
46、 95, 2457-2483.3 A. Suzuki, J. Organomet. Chem., 1999, 576, 147-168.4 A. Suzuki, J. Organomet. Chem., 2002, 653, 83-90.5 F. R. Fortea-Perez, I. Schlegel, M. Julve, D. Armentano, G. D. Munnob and S. E. Stirib, J. Organomet. Chem., 2013, 743, 102-108.6 X. J. Jiang, S. Sakthivel, K. Kulbitski, G. Nisne
47、vich and M. Gandelman, J. Am. Chem. Soc., 2014, 136, 9548-9551.7 L. F. Liu, Y. Dong, B. Pang and J. H. Ma, J. Org. Chem., 2014, 79, 7193-7198.8 D. Zhang and Q. R. Wang, Coord. Chem. Rev., 2015, 286, 1-16.9 S. P. Stanforth, Tetrahedron, 1998, 54, 263-303.10 S. Kotha, K. Lahiri and D. Kashinath, Tetra
48、hedron, 2002, 58, 9633-9695.11 V. F. Slagt, A. H. M. De Vries, J. G. De Vries and R. M. Kellogg, Org. Process Res. Dev., 2010, 14, 30-47.12 V. Polshettiwar, A. Decottignies, C. Len and A. Fihri, ChemSusChem, 2010, 3, 502522.13 W. Shen, Tetrahedron Lett., 1997, 38, 5575-5578.14 A. F. Littke and G. C.
49、 Fu, Angew. Chem. Int. Edit., 1998, 37, 3387-3388.15 J. Hassan, M. Sévignon, C. Gozzi, E. Schulz and M. Lemaire, Acc. Chem. Res., 2007, 40, 676-684.16 R. Martin and S. L. Buchwald, Acc. Chem. Res., 2008, 41, 1461-1473.17 G. C. Fu, Acc. Chem. Res., 2008, 41, 1555-1564.18 G. A. Molander and B. Ca
50、nturk, Angew. Chem. Int. Ed., 2009, 48, 9240-9261.19 S. Jindabot, K. Teerachanan, P. Thongkam, S. Kiatisevi, T. Khamnaen, P. Phiriyawirut and P. Sangtrirutnugul, J. Organomet. Chem., 2014, 750, 35-40.20 L. F. Liu, W. D. Wang and C.Y. Xiao, J. Organomet. Chem., 2014, 749, 83-87.21 V. Leigh, W. Ghatta
51、s, H. Mueller-Bunz and M. Albrecht, J. Organomet. Chem., 2014, 771, 33-39.22 P. Gu, Q. Xu and M. Shi, Tetrahedron, 2014, 70, 7886-7892.23 S. Yasar, C. Sahin, M. Arslan and I. Ozdemir, J. Organomet. Chem., 2015, 776, 107-112.24 D. H. Lee, Y. H. Lee, D. Kim II, Y. Kim, W. T. Lim and J. M. Harrowfield,
52、 Tetrahedron, 2008, 64, 7178-7182.25 M. M. Amini, A. Feiz, M. Dabiri and A. Bazgir, Appl. Organometal. Chem., 2014, 28, 86-90.26 E. Amadio, A. Scrivanti, M. Bortoluzzi, M. Bertoldini, V. Beghetto, U. Matteoli and G. Chessa, Inorg. Chim. Acta, 2013, 405, 188-195.27 G. Grach, G. Pieters, A. Dinut, V.
53、Terrasson, R. Medimagh, A. Bridoux, V. Razafimahaleo, A. Gaucher and S. Marque, Organometallics, 2011, 30, 4074-4086.28 J. Ratniyom, T. Chaiprasert, S. Pramjit, S. Yotphan, P. Sangtrirutnugul, P. Srisuratsiri, P. Kongsaeree and S. Kiatisevi, J. Organomet. Chem., 2014, 752, 161-170.29 A. O. Eseola, D
54、. Geibig, H. Görls, W. H. Sun, X. Hao, J.A.O.Woods and W. Plass, J. Organomet. Chem., 2014, 754, 39-50.30 E. Amadio, A. Scrivanti, V. Beghetto, M. Bertoldini, M. M. Alam and U. Matteoli, RSC Adv., 2013, 3, 21636-21640.31 W. A. Herrmann, M. Elison, J. Fischer, C. Kocher and G. R. J. Artus, Angew
55、. Chem. Int. Ed., 1995, 34, 2371-2374.32 V. P. W. Bohm, C. W. K. Gstottmayr, T. Weskamp and W. A. Herrmann, J. Organomet. Chem., 2000, 595, 186-190. 33 C. Zhang and M. L.Trudell, Terahedron Lett., 2000, 41, 595-598.34 S. Würtz and F. Glorius, Acc.Chem. Res., 2008, 41, 1523-1533.35 X. F. Chen, H. H. Ke, Y. Chen, C. W. Guan and G. Zou, J. Org. Chem., 2012, 77, 7572-7578.36 G. Altenhoff, R. Goddard, C. W. Lehmann and F. Glorius, J. Am. Chem. Soc., 2004, 126, 15195-15201.37 J. Cui, M. Zhang and Y. Zhan, Inorg. Chem.Commun., 2010, 13, 81-85.38 M. J. Jin and D. H. Lee, A
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 换热站反事故演练课件
- 黑热病诊疗方案课件
- 红旗营销策划课件
- 红旗图案课件
- 红旗汽车课件
- 红旗课件制作课件
- 黑气典型案例分享课件
- 后勤安全保育培训课件
- 2026及未来5年服务行业服装项目可行性研究报告(市场调查与数据分析)
- 环评宣讲课件
- 高甘油三酯血症管理专家共识(2025版)
- 体育场馆安全生产管理台账
- 东航校招的在线测评题目2026
- 2026语文新教材 1第24课《我将无我不负人民》
- 2026安徽省考评员培训考试题库及答案
- 凝心聚力共逐梦家校携手启新程
- 2026年度专项行动保密工作排查整治专项行动方案
- 桥梁伸缩缝更换工程施工组织方案
- 混凝土路面拆除及恢复施工方案
- 2026及未来5年中国航空飞行培训行业市场全景调研及前景战略研判报告
- 2025河南洛阳国裕集团招聘6人笔试参考题库附带答案详解(3卷合一版)
评论
0/150
提交评论