NetBackup5230测试报告

1、NBU5230 Appliance测试报告一、基本信息：网络：网口数量：eth0、eth1、eth2、eth3注：eth0只能用于管理Eth0相关信息：IP地址：33用户名：admin密码：Pssw0rdIPMI信息：IPMI是Appliance设备的远程管理控制卡，通过IPMI可以进行远程控制操作比如开机关机、用ISO重新安装操作系统、查看基本的硬件信息等。IP地址：0用户名：sysadmin密码：Pssw0rd初始化配置过程：配置IP地址：在 Main_Menu > Network 视图中，输入以下命令来配置希望设备连接到的单个网络的

2、IP 地址。Configure IPAddressNetmaskGatewayIPAddress InterfaceNames其中，IPAddress 是新 IP 地址，Netmask 是网络掩码，而 GatewayIPAddress是该接口的默认网关。 InterfaceNames 选项为可选选项。例：Configure 33 eth1,eth2,eth3 balance-rr注：用SSH登录到Appliance命令行菜单注意：如果采用SecureCRT连接工具，可能要修改Authentication认证方式为Keyb

3、oard Interactive，否则系统将拒绝您登录添加hosts记录此步骤可让您在设备主机文件中添加其他主机的 IP 地址。从 Main_Menu > Network 视图中，使用以下命令将主机条目添加到您设备上的主机文件中。Hosts Add IPAddressFQHNShortName其中，IPAddress 是 IPv4 或 IPv6 地址，FQHN 是完全限定的主机名，ShortName 是短主机名。例：hosts Add 4 glpnbu02配置主机名称从 Main_Menu > Network 视图中，使用以下命令设置您设备的主机名。Hostn

4、ame Set Name其中，Name 是完全限定的主机名。通过此步骤，NetBackup 得到重新配置，可以新主机名使用。完成此过程可能需要一些时间。例：hostname set name nb-app01启用网络链路聚合Main_Menu > Network > LinkAggregation Enable例：Linkaggregation enag enable配置时区从 Main_Menu > Network 视图中，使用以下命令为此设备设置时区、日期和时间： 通过输入下列命令设置时区：TimeZone Set从显示的列表中选择相应的时区。 通过输入下列命令设置日期和

5、时间：Date Set MonthDayHHMMSSYear配置设置为介质服务器在master sever上添加hosts记录从 Main_Menu > Appliance 视图中运行以下命令：Media MasterServer其中，MasterServer 为独立主服务器、多宿主主服务器或群集主服务器。以下内容分别定义了这些情形：此情形将显示一个主服务器主机名。只要设备可以识别网络上的主服务器，此名称便无需为完全限定的名称。以下是该命令的用法示例。Media MasterServerName配置存储转到manage->storage菜单，输入show，列出当前的存储信息，如下可

6、以看出Uni_2是扩展柜，状态为New Available;nb-appliance.Storage> show-Device | Total | Unallocated | Status -Appliance Operating System | 930.38 GB | - | In Use Base Unit Storage (unit_1) | 4.5429 TB | 4.5419 TB | In Use Expansion Unit Storage (unit_2) | 35.470 TB | - | New AvailableNOTE: The name that appear

7、s in () (ex: unit_1) is the device name. Use the appropriate device name while issuing the commands to manipulate the storage.-Partition | Total | Available | Used | %Used-AdvancedDisk | 0 GB | 0 GB | 0 GB | 0%Deduplication | 0 GB | 0 GB | 0 GB | 0%Unallocated | 4.5419 TB | - | - | -3、使用Add命令将扩展柜添加到

8、系统nb-appliance.Storage> Add - Info Following expansion units can be added:- Info unit_2nb-appliance.Storage> Add unit_2- Info Checking the type of the 'unit_2' device.- Info Checking the state of the 'unit_2' expansion unit device storage.- Info Initializing 'unit_2' ex

9、pansion storage.- Info Configuring 'unit_2' expansion unit storage.- Info Adding 'unit_2' expansion unit storage space to 'Unallocated' space.- Info Succeeded.4、用show命令检查扩展柜是否已经被系统正常识别nb-appliance.Storage> show-Device | Total | Unallocated | Status-Appliance Operating Syst

10、em | 930.38 GB | - | In UseBase Unit Storage (unit_1) | 4.5429 TB | 4.5419 TB | In UseExpansion Unit Storage (unit_2) | 35.470 TB | 35.470 TB | In UseNOTE: The name that appears in () (ex: unit_1) is the device name. Use the appropriate device name while issuing the commands to manipulate the storag

11、e.-Partition | Total | Available | Used | %Used-AdvancedDisk | 0 GB | 0 GB | 0 GB | 0%Deduplication | 0 GB | 0 GB | 0 GB | 0%Unallocated | 40.012 TB | - | - | -配置NBU5230 SAN Client备份1、 连接光钎卡5、6模块的1口到光钎交换机，SAN Client光钎通道连接到光钎交换机，并将这三个口作为一个zone（插槽右边1口）2、 NBU5230配置为FC Medianbu-5230.Main_Menu> Settin

12、gs Entering appliance settings view.Alerts Alerts and Call Home settings.Deduplication Change Deduplication parameters.Exit Logout and exit from the current shell.FibreTransport Administer Fibre Transport features.NetBackup NetBackup settings.Password Change user password.Return Return to the previo

13、us menu.Security Manage Security.Share Configure media share.Shell Shell operations.Sysctl Change Sysctl parameters.SystemLocale Display/Change appliance system locale for international support.nbu-5230.Settings> FibreTransport NBUAppliances SANClient nbu-5230.Settings> FibreTransport SANClien

14、t Disable Enable Show nbu-5230.Settings> FibreTransport SANClient Enable- Warning This operation will require a reboot to complete. >> Do you want to continue? yes,no: yesname:nbu-5230:Fibre Transport server has been enabled, however, the appliance must be rebooted. SAN Client will not func

15、tion correctly until this is carried out.nbu-5230.Settings> Return3、 配置完成SAN Client后光钎卡模式为target模式nbu-5230.Main_Menu> Manage Entering appliance management view.Exit Logout and exit from the current shell.FibreChannel Manage Fibre Channel.Libraries Manage Robotic Tape Libraries.License License

16、Administration.MountPoints Manage remote mount points.NetBackupCLI Execute NetBackup Commands.OpenStorage Manage OpenStorage plugins.Return Return to the previous menu.Shell Shell operations.Software Manage Software Updates.Storage Manage Storage.Tapes Manage Tape Media.nbu-5230.Manage> FibreChan

17、nel Entering Fibre Channel Administration view.Clean Clean stale SCSI information about unresponsive FC devices from the system.Configure Configure supported FC HBA cards if required. WARNING, This operation may require a reboot.Exit Logout and exit from the current shell.Reset Reset FC HBA initiato

18、r ports in this appliance. WARNING: This operation may cause any in-progress transfers to fail.Return Return to the previous menu.Scan Scan FC HBA initiator ports in this appliance for target devices.Shell Shell operations.Show Show FC HBA cards in this appliance and configuration.Statistics Display

19、 basic utilisation statistics for FC HBA initiator ports in this appliance.nbu-5230.FC> showFC HBA card(s) are configured correctly.* FC HBA Cards *07:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)07:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb

20、Fibre Channel to PCI Express HBA (rev 02)08:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)08:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)81:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel t

21、o PCI Express HBA (rev 02)81:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)82:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)82:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express H

22、BA (rev 02)* Drivers *qla2xxx is loadedwindrvr6 is loaded* Ports *Bus ID Slot Port WWN Status Mode Speed Remote Ports 07:00.0 Slot5 21:00:00:24:FF:55:DB:8E Fabric Target 4 gbit/s - 07:00.1 Slot5 21:00:00:24:FF:55:DB:8F Linkdown Initiator 8 gbit/s 08:00.0 Slot6 21:00:00:24:FF:55:D9:CE Ptp Target 4 gbit/s - 08:00.1 Slot6 21:00:00:24:FF:55:D9:CF Linkdown Initiator 8 gbit/s 81:00.0 Slot4 21:00:00:24:FF:55:D9:D0 Linkdown Initiator 8 gbit/s 81:00.1 Slot4 21:00:00:24:FF:55:D9:D1 Linkdown Initiator 8 gbit/s 82:00.0 Slot2 21:00:00:24:FF:55:DB:24 Linkdown Initiator 8 gbit/s 82:00.1 Slot2 21:00:00:24:FF