宝石复印管理机系统解决方案

1、Poscard Copier Management System Solution1 Brief introduction:Poscard copier management system can make control over majority types of photocopiers, with TCP / IP or RS485 communication interface, user can choose between the two. If network is not practicable the system can work in a way of offline

2、status as well, however M1 card electronic wallet is required at offline status.Poscard copier management system can directly connect to copiers external control interface, with user card for controlling the validity of copiers “COPY” button; as well receiving copiers counting pulse as for charging

3、basis.Poscard copier management system can easily set up fee rate and charge on basis of each sheet, and without man control. This system has solved a long existing problem in college campus: photocopying service has mass frequent and mess situation on fee charging management. The system can perfect

4、ly link to Poscard Campus Universal Card system.2 Poscard copier management systems technical index:Dimension：Height 160 mm× Width 118 mm× Depth 40 mm·POS weight：0.3 kg·POS power consumption：5W ·Power voltage：DC24V·Working environment temperature：550·Working humidi

5、ty：2090RH·Settlement time：0.5s·Fee rate：0.0199.99 yuan / sheet·Card reading range：100 mm·Communication method：TCP-IP or RS485·Display：5 digits LED digital displayVoice: buzzer promptPower off data protection period: 10 yearsCard type: read-only ID card or re-writable M1 card

6、, can be setClock: record offline consumption flowing timeData storage: storage capacity is 32K, capable for 2,000 black lists and 1,000 offline flowing data (storage capacity can be upgraded at users option)3 Products functions and features:3.1 Use TCP / IP communication method:TCP / IP communicati

7、on is capable for LAN connections with separate controlling terminals. Each TCP / IP controller can be assigned with an IP address, then communicate with server (with administrative software) in a way of SOCKET communication via TCP / IP protocol. The communication is rapid and quick, management cen

8、ter server can process incoming information from each terminal. This system has capacity for data storage, in case of network malfunction which causes disconnection with server, the system can still perform at offline status. Once network communication returns, offline data will be uploaded immediat

9、ely.3.2 Use electronic wallet to consume:When use electronic wallet (embedded within radio frequency card) to consume, the process is only related to wallets data, nothing with network, easy, safe and reliable. During consumption process the POS unit does not need communication cable; its configurat

10、ion is transmitted to POS unit via setup card, consumption amount is directly deducted from consumption card account; consumption total amount is transmitted to computer via gathering card.3.3 Product application:Library of college, institute and technical schoolEnterprise copier management3.4 Compa

11、tible copier types for copier management system:Canon series：NP-1215；NP-1010；NP-1515；NP-2020 NP-2120 NP-3020 NP-3050 NP-3825 NP-4050 6421NP-4080 NP-6030 NP-6650, etc.Ricoh series：simulation 56 series；digital unit 1018 1022 1027 1035 1045 2045；Xerox series：V258；330；358；300；V2015；Selex series：all seri

12、es；Toshiba series：simulation series；digital unit e35；Panasonic series：simulation series 7718 7725 7842 7835；digital unit 2000 2500；Minolta series：all series simulation unit；Sharp simulation：2055 2060。4 Copier management system installations:Nail two concrete nails on copiers front wall. Nails leave

13、5 mm outside wall and 90 mm distance with each other, nail heads diameter is 8 mm. The system then is hooked on the nails (by its installation holes), press down the unit and make is stable.Copier cable is connected to copiers external controller connector; TCP / IP communication cable is connected

14、to the network via RJ45 connector. RS485 cable is laid by twisted pair cable and protected by PVC cable groove.Install management software and complete set up process (identification, fee rate, etc.).5 How to use the system:Run the management software and make it working.Copier management system is

15、powered on and conduct seft-checking. It displays “8” from left to right then program version number is shown. Current time is shown means the system is standing by.Hold card to reading area, after identifying process the system shows remaining amount. Put original document and blank paper on copier,