ble010v2rohs2016年12月测试结论成分报告

1、Test ReportDate: Dec.02, 2016Report No.: A001E20161128030Page 1 of 8Applicant: Address:TRUSTED LINK TECHNOLOGY LIMITEDRoom3001, Block B, Laobing Business Building, BaoAn Road, BaoAn, Shenzhen, Guangdong,Report on the submitted sample(s) said to be:Sample Name:Bluetooth moduleSample MManufacturer:BLE

2、010V2TRUSTED LINK TECHNOLOGY LIMITEDAddress:Room3001, Block B, Laobing Business Building, BaoAn Road, BaoAn, Shenzhen,Guangdong,Sample Received Date:Testing Period:Nov.28, 2016Nov.28, 2016 to Dec.02, 2016Test Requested:Test Method: Test Result:Please refer to following page(s).Please refer to follow

3、ing page(s).Please refer to following page(s).Tested by：Reviewed by：Approved by：Liwenlong, Felix.LiJiangyuncheng, JasonLiulinwen, LewisTest EngineerLaboratory ManagerTechnical DirectorTest ReportDate: Dec.02, 2016Report No.: A001E20161128030Page 2 of 8Test Requested:Cd, Hg, Cr6+, PBBs, PBDEs content

4、 in theAs specified by, to determine the Pb,submitted sample in accordance with EU RoHS Directive 2011/65/EU(RoHS) and itsamendment directives on XRF and Chemical Method.PassTest Methods:A: Screening by X-ray Fluorescence Spectrometry (XRF) :With reference to IEC 62321-3-1:2013 Ed 1.0 Screening Lead

5、, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometryB: Chemical test:Test ItemTest MethodMeasuringInstrumentMDLCadmium (Cd)IEC 62321-5:2013 Ed 1.0 Section 7ICP-OES2 mg/kgLead (Pb)IEC 62321-5:2013 Ed 1.0 Section 7ICP-OES2 mg/kgMercury (Hg)IEC 62321-4:2013 Ed 1.0 Sec

6、tion 7ICP-OES2 mg/kgNon-metalHexavalent Chromium (Cr6+)IEC 62321:2008 Ed 1.0 Annex CUV-Vis1 mg/kgMetalHexavalent Chromium (Cr6+)IEC 62321:2008 Ed 1.0 Annex BUV-Vis/PBBs/PBDEsIEC 62321:2008 Ed 1.0 Annex AGC-MS5 mg/kgTest ReportDate: Dec.02, 2016Report No.: A001E20161128030Page 3 of 8Test Results:A、EU

7、 RoHS Directive 2011/65/EU and its amendment directives on XRFElementUnitNon-metalMetalComposite MaterialCdmg/kgBL70-3X130+3OLBL70-3X130+3OLBL50-3X150+3OLPbmg/kgBL700-3X1300+3OLBL700-3X1300+3OLBL500-3X1500+3OLHgmg/kgBL700-3X1300+3OLBL700-3X1300+3OLBL500-3X1500+3OLCrmg/kgBL700-3XBL700-3XBL500-3XBrmg/

8、kgBL300-3X-BL250-3XSeq. No.Tested Part(s)Results(mg/kg)CdPbHgCrBr1Chip capacitorBLBLBLBLBL2Chip inductorBLBLBLBLBL3Chip IC(A05U)BLBLBLBLBL4Chip resistorBLBLBLBLBL5IC body(16051701)BLBLBLBLBL6Pin(16051701)BLBLBLBL-7Chip crystalBLBLBLBLBL8Chip AntennaBLBLBLBLBL9Chip crystal(A61)BLBLBLBLBL10Tin solder(

9、PCB board)BLBLBLX*-11Solder resist(PCB board)BLBLBLBLBL12Copper foil(PCB board)BLBLBLBL-13Substrate(PCB board)BLBLBLBLX*Test ReportDate: Dec.02, 2016Report No.: A001E20161128030Page 4 of 8Note:BL= Below LimitOL= Over limited X= Inconclusive “-“= Not regulated*= Scanning by XRF and detected by chemic

10、al method. The test results of chemical method please refer to next pages.Remark:Results were obtained by XRF for primary scanning, and further chemical testing by ICP (for Cd, Pb, Hg), UV-Vis (for Cr() and GC-MS (for PBBs, PBDEs) are recommended to be performed, if the concentration exceeds the abo

11、ve warning value according to IEC 62321-3-1:2013 Ed 1.0.The XRF scanning test for RoHS elements The ing may be different to the actual content in the sample be of non-uniformity composition.Theum permissible limit is quoted from the document 2005/618/EC amending RoHS directive2011/65/EU:Disclaimers:

12、This XRF Scanning report is for reference purposes only. The applicant shall make its/his/her own judgment as to whether the information provided in this XRF screening report is sufficient for its/his/her purposes.The result shown in this XRF scanning report will differ based on various factors, inc

13、luding but not limited to, the sample size, thickness, area, surface flatness, equipment parameters and matrix effect (e.g. plastic, rubber, metal, glass, ceramic etc.). Further wet chemical pre-treatment with relevant chemical equipment analysis are required toobtain qutative data.RoHS Restricted S

14、ubstancesum Concentration Value (mg/kg)(by weight in homogenous materials)Cadmium (Cd)100Lead (Pb)1000Mercury (Hg)1000Hexavalent Chromium (Cr()1000Polybrominated biphenyls (PBBs)1000Polybrominated diphenylethers (PBDEs)1000Test ReportDate: Dec.02, 2016Report No.: A001E20161128030Page 5 of 8B、The Tes

15、t Results of Chemical Method:1)The Test Results of metal Cr6+Note:-Negative = Absence of Cr() on the tested areas MDL = Method Detection Limit* = Spot-test:Negative = Absence of Cr() coating/ surface layer Positive = Presence of Cr() coating/ surface layer(The tested sample should be further verifie

16、d by boiling-water-extraction method if the spot test result cannot be confirmed)Boiling-water-extraction:Negative = Absence of Cr() coating/ surface layerThe detected concentration in boiling- water-extraction solution is less than 0.02 mg/kg with 50cm2 sample surface areas.Positive = Presence of C

17、r() coating/ surface layerThe detected concentration in boiling- water-extraction solution is equal or greater than 0.02 mg/kg with 50cm2 sample surface areas.# =-Negative indicates the absence of Cr() on the tested areas and result be regarded as no requirement.Positive indicates the presence of Cr

18、() on the tested areas.with RoHSStorage conditions and production date of the tested sample are unavailable and thus result of Cr(VI) represent status of the sample at the time of testing.Test Item(s)MDLResult(s)Limit10Hexavalent Chromium (Cr6+)*Negative#Test ReportDate: Dec.02, 2016Report No.: A001

19、E20161128030Page 6 of 82）The Test Results of PBBs & PBDEsUnit: mg/kgNote:N.D. = Not Detected or less than MDL mg/kg = ppm= parts per millionMDL = Method Detection LimitItem(s)MDLResult(s)Limit13Polybrominated Biphenyls (PBBs)Monobromobiphenyl5N.D.Total PBBs Content 1000Dibromobiphenyl5N.D.Tribromobiphenyl5N.D.Tetrabromobiphenyl5N.D.Pentabromobiphenyl5N.D.Hexabromobiphenyl5N.D.Heptabromobiphenyl5N.D.Octabromobiphenyl5N.D.Nonabromodiphenyl5N.D.Decabromodiphenyl5N.D.Total content/N.D.Polybrominated Diphenylethers (PBDEs)