下载本文档
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、H-Point Test Procedure Review1 Place a muslin cotton cloth loosely over the seat. Tuck the cloth into the bite-line located in the back of the seat and smooth the wrinkles out of the cloth.2.Pick OSCAR up by holding the T-Bar and torso weight retainer. Lift him in the closed position and keep him fr
2、om folding out. Gently place Oscar on to the centerline of the seat.3.Attach the both leg assemblies at the 4.5-inch mark on the inside of the T- Bar. The T-Bar and leg assemblies should be locked into position at the 95 percent mark.4. Load lower leg and thigh weights. Check to ensure that the T- B
3、ar is parallel to the ground or refer to the level at the base of Oscar to ensure proper positioning. 5.While Oscars torso is forward, use the T- Bar to pull Oscar about 1 to 2 inches away from the seat back. Let him slide gently back until the back pan contacts the seat back.6.Using a digital force
4、 gauge, apply a 22 pound load twice to the spring located at the intersection of the hip angle quadrant and the T- Bar. Keep Oscar from sliding forward in the seat.7.Holding the T- Bar and using no pressure, push the torso to the seat back.8.Hold the T- Bar, load the right and left buttock weights.
5、9. Alternate sides as you load the eight upper torso weights.10. Bring Oscar s torso forward until the stop is contacted.10.Holding the T-Bar, gently rock Oscar 5 degrees to each side for three complete cycles. Watch the bubble gage to ensure that 5 degrees of movement is reached but not exceeded.11
6、.Return Oscars feet to their original location on the floor pan and check to ensure Oscar remains level.12. Holding the T-Bar and using no pressure, push Oscars torso to the seat back.13.Apply a rearward force, perpendicular to the hip angle bar, just above the torso weights that is equal to 15 pounds of force or enough to move the hip angle 3 degrees. This will set Oscars torso to the seat back. Repeat this process at least three times or until a consistent hip angle is maintained.14.Record back angle measure15.Record hip angle measure16.Record aver
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2026日本动漫周边版权行业市场供需分析及投资评估规划分析研究报告
- 2026中国特高压输电技术标准完善与新能源占比提升研究
- 2026中国智能家具品牌行业市场供需分析投资评估发展前景规划行业研究报告
- 2026中国智能车载娱乐系统行业市场现状研发分析及投资评估规划分析研究报告
- 2026中国叶黄素酯新品牌孵化策略与爆品打造案例研究
- 2026中国新能源行业政策扶持与产业前景深度调研及趋势分析报告
- 2026中国智能假肢市场需求变化与政策导向深度调研报告
- 2026中国水产品养殖行业市场供需分析及投资评估规划分析研究报告
- 2026中国智能实验室设备系统行业市场供需分析及投资前景评估规划研究报告
- 2026青海西宁再生资源产业体系供需结构调整与循环经济投资布局研究报告
- 皋埠中学分班考试试卷及答案
- 磁粉探伤一级(取证复习题)练习试题
- DB43-T 2390-2022 小龙虾人工繁育技术规程
- JG/T 13-1999门式钢管脚手架
- JJG633-2024气体容积式流量计检定规程
- 2024年云南省昆明市官渡区小升初数学试卷(含答案)
- 《PLC应用项目工单实践教程》课件 模块6 函数、函数块、数据块及应用
- GB/T 44948-2024钢质模锻件金属流线取样要求及评定
- 备考2025高考物理“二级结论”精析与培优争分练讲义-01 共点力平衡(教师版)
- 广联达GTJ建模进阶技能培训
- 涉密人员违规处罚
评论
0/150
提交评论